We are highly engaged as the manufacturers of Heavy Warehouse Shed from Ghaziabad, India. This high quality Prefabricated Warehouse is best suited for living accommodations, office block or storage purposes where land availability is limited. We provide customized solution for every requirement to fulfil the varied needs of the customers to the utmost possible level. In addition to this, a quick multi storey structure with thermal and acoustic insulation with the possibility of re-allocation of coming at an economical cost is the perfect solution for the need of mass communication & group housing.
Light weight panels
Fire fighting equipment included
Aluminum/Zinc alloy sheets are 0.47 mm nominal thickness, cold roll-formed from a hot rolled coil conforming to ASTM A-792 M, AZ 150 Grade-550 or equivalent. These sheets are hot dipped coated with a 55% Aluminum, 1.5% Silicon and 43%.5 Zinc Alloys.
ER SL I 750/SS 2000/ SS 2500 sheets are cold roll-formed from hot rolled coil conforming to ASTM A 792 M, AZ 150 Grade 275 or equivalent. These sheets are hot dipped coated with a 55% Aluminum, 1.5% Silicon and 43.5% Zinc Alloys.
Pre-painted sheets are 0.5 nun nominal thickness, coated with a baked silicon polyester finish on top of an Alum/Zinc alloy finished steel sheet (as per the specifications of 3.1.5 above). The paint finish film thickness is 20 microns of silicon modified polyester on the exterior face and 5 microns of polyester on the interior face.
Exterior and interior finishes on the roof panel shall be unpainted Aluminum/Zinc alloy coated panel.
Exterior finish coat on the wall panel shall be modified silicone polyester paint with color selected from the standard steel color chart.
Interior finish coat of wall panels shall be polyester paint, std gray color.
Horizontal sliding steel doors shall be manufactured form cold formed channels and girts, 2 mm minimum thickness, and delivered in knocked down (KD) for field assembly.
Door leafs shall be covered with 0.5 mm pre-painted EW panel. Panel ribs shall run vertically.
Door leafs shall be suspended form a trolley rail track, supported by a structural header.
Doors shall be bottom guided by a 2 mm minimum thickness steel rail rack and covered at top by a frost White pre-painted sheet hood.
Sliding door standard sizes shall be 3000 mm, 4000 mm and 5000 mm wide double slide, with nominal heights of 3500 mm, 4500 mm 5000 mm or 5500 mm.
Roll up doors shall be manual or electrically chain operated (as noted below).
Standard door sizes shall be:
Doors shall be complete with guides, axle, curtain, and operating mechanism.
Louvers shall be complete with S type fixed blades made of 0.5 mm thick galvanized sheets.
Gravity flow Ridge Vents shall be 300 mm, 500 mm, or 600 mm throat, either continuous or individual 3000 mm long units.
Trims shall be made of pre-painted galvalume steel, 0.5 mm thickness.
Downspouts shall be box type nominal 89 mm x 118 mm made of 0.5 mm, pre-painted galvanized off white sheet with minimum yield strength of 240 Mpa.
Liner panels shall be EW profile in 0.5 mm thick pre painted galvanized off white finish.
We will provide our service in minimum area 10,000 square feet.
About the Company
Year of Establishment1992
Legal Status of FirmSole Proprietorship (Individual)
Nature of BusinessManufacturer
Number of Employees26 to 50 People
Annual TurnoverRs. 10 - 25 Crore
IndiaMART Member SinceFeb 2012
We, Gaytri Infratech Building Solutions are established in 1992 ,we are the manufacturer and service provider of Pre-Engineered Steel Buildings such as Warehouse Sheds, Pre Engineered Steel Building, Prefabricated Building, Prefabricated Sheds and much more. We are service provider of Fabrication Work. We are also manufacturer of Conventional Sheds for any type of light weight or temporary structures and heavy structures. We are the best service provider of any type of Fabrication Work.