LiteBeam AC Gen2 Wireless Access Point

₹ 5,500/ PCSGet Latest Price
Processor Specs
MIPS 74Kc
Max Power Consumption
7W
Networking Interface
(1) 10/100/1000 Ethernet Port
LEDs
Power, Ethernet
Gain
23 dBi
Overview:
- Ubiquiti Networks launches the latest generation of airMAX® CPE (Customer Premises Equipment), the LiteBeam® 5AC Gen 2, with dedicated Wi-Fi management.
- Improved Noise Immunity
* The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the LiteBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
Software airOS8:
* AirOS® v8 is the revolutionary operating system for Ubiquiti® airMAX ac products.
Powerful Wireless
Features: * Access Point PtMP airMAX Mixed Mode
* AirMAX ac Protocol Support
* Long-Range Point-to-Point (PtP) Link Mode
* Selectable Channel Width
* PtP: 10/20/30/40/50/60/80 MHz
* PtMP: 10/20/30/40 MHz
* Automatic Channel Selection
* Transmit Power Control: Automatic/Manual
* Automatic Distance Selection (ACK Timing)
* Strongest WPA2 Security
UMobile App:
* The LiteBeam 5AC Gen 2 integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.
* Accessing airOS via Wi-Fi
* The UMobile App provides instant accessibility to the airOS configuration interface and can be downloaded from the App Store (iOS) or Google Play™ (Android). UMobile allows you to set up, configure, and manage the LiteBeam 5AC Gen 2. It offers the following options once you're connected or logged in to the device:
* Status Check link status information or the basic configuration settings of the LiteBeam 5AC Gen 2.
* Configuration  Change or update the existing configuration of the LiteBeam 5AC Gen 2.
* Tools Access tools for initial installation and configuration of the LiteBeam 5AC Gen 2.
* Actions Back up or update the configuration, upload new firmware, reboot the device, reset the device to factory defaults, access the airOS UI in the web browser, or disconnect from the LiteBeam 5AC Gen 2.
View Complete Details
Get Latest PriceRequest a quote

Air Networking Solution

Navrangpura, Ahmedabad, Gujarat
3.7/5 
★★★★★
★★★★★
 (36)
GST24BXNPS7313B1ZI
TrustSEAL Verified
Wholesale Trader
 View Mobile Number 
62% Response Rate
Contact Supplier

Product Details

Company Details

Product Specification

Processor SpecsMIPS 74Kc
Max Power Consumption7W
Networking Interface(1) 10/100/1000 Ethernet Port
LEDsPower, Ethernet
Gain23 dBi
Memory64 MB DDR2
Power MethodPassive PoE (Pairs 4, 5+; 7, 8 Return)
Dimensions358 x 271.95 x 272.5 mm (14.09 x 10.71 x 10.73")
Weight800 g (1.76 lb), 980 g (2.16 lb) (Without Mount With Mount)
Power Supply24V, 0.3A Gigabit PoE Adapter (Included)
Supported Voltage Range24V +/-10%

Product Description

Overview:
  • Ubiquiti Networks launches the latest generation of airMAX® CPE (Customer Premises Equipment), the LiteBeam® 5AC Gen 2, with dedicated Wi-Fi management.
  • Improved Noise Immunity
  • The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the LiteBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.

Software airOS8:

  • AirOS® v8 is the revolutionary operating system for Ubiquiti® airMAX ac products.

 

Powerful Wireless Features:

  • Access Point PtMP airMAX Mixed Mode
  • AirMAX ac Protocol Support
  • Long-Range Point-to-Point (PtP) Link Mode
  • Selectable Channel Width
  • PtP: 10/20/30/40/50/60/80 MHz
  • PtMP: 10/20/30/40 MHz
  • Automatic Channel Selection
  • Transmit Power Control: Automatic/Manual
  • Automatic Distance Selection (ACK Timing)
  • Strongest WPA2 Security

UMobile App:
  • The LiteBeam 5AC Gen 2 integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.
  • Accessing airOS via Wi-Fi
  • The UMobile App provides instant accessibility to the airOS configuration interface and can be downloaded from the App Store (iOS) or Google Play™ (Android). UMobile allows you to set up, configure, and manage the LiteBeam 5AC Gen 2. It offers the following options once you're connected or logged in to the device:
  • Status Check link status information or the basic configuration settings of the LiteBeam 5AC Gen 2.
  • Configuration  Change or update the existing configuration of the LiteBeam 5AC Gen 2.
  • Tools Access tools for initial installation and configuration of the LiteBeam 5AC Gen 2.
  • Actions Back up or update the configuration, upload new firmware, reboot the device, reset the device to factory defaults, access the airOS UI in the web browser, or disconnect from the LiteBeam 5AC Gen 2.

Additional Information

Item Code LBE-5AC-Gen2
Interested in this product?Get Latest Price from the seller
Contact Seller

About the Company

Year of Establishment2013
Legal Status of FirmIndividual - Proprietor
Nature of BusinessWholesale Trader
Number of EmployeesUpto 10 People
Annual TurnoverRs. 10 - 25 Crore
IndiaMART Member SinceFeb 2014
GST24BXNPS7313B1ZI
Import Export Code (IEC)BXNPS*****
Established as a Proprietor firm in the year 2013 at Ahmedabad (Gujarat, India), we “Air Networking Solution” are a leading Wholesale Trader of a wide range of Ruckus Zone Flex Products, Mikrotik Products, Ligowave Products, etc. We procure these products from the most trusted and renowned vendors after stringent market analysis. Further, we offer these products at reasonable rates and deliver these within the promised time-frame. Under the headship of “Mr. Vikas Sharma” (Proprietor), we have gained a huge clientele across the nation.
LiteBeam AC Gen2 Wireless Access Point
LiteBeam AC Gen2 Wireless Access Point
termsprivacy policy

Seller Contact Details

Vikas Sharma

3, Gokul Complex, Below, Sankalp Restaurant, Navrangpura Ahmedabad - 380052, Gujarat, India

Get Directions
View Mobile No.
Send SMS
Send Email