Marposs TCI-8 Transducer Conditioning Interface To PLC
Brand | Marposs |
Measuring Range | (1 mm, 2mm, 3 mm, 5 mm, 10 mm) |
Tension Mode | -+5V,-+10V, 0-10V, Maximum output current -+1 mA |
Typical Consume With Transducer Connected Voltage | Voltage output: -+ 270 mA max. Current output: -+450 mA max. |
If Configured With A Tension Output Signal | (-+12 V)-+12 Vdc -+5% Max. ripple allowed at 100/120 Hz: 50 mVpp |
It has been developed with technical and functional specifications particularly suited to convert a position or a dimensional measurement, performed by LVDT or HBT transducers, in a signal compatible with most of the analogue data acquisition cards. The unit output provides a direct electric signal (voltage or current), proportional to the measurement value of the sensor connected in input. The output signal can be acquired by PLC analogue cards to control and manage process automations and for further processing by SCADA supervision systems.The TCI interfaces are PLUG&PLAY units and therefore are supplied already calibrated for the model of sensor being used. This ensures that the machine down times are drastically reduced as the installation and maintenance operations are simplified.Features
- easy to install as it is calibrated during the production based on the model of sensor being used
- compatible with most of the sensors available on the market
* highly customisable
* reliable and sturdy
* one channel
* four channels
* eight channels
Product Details
Company Details
Product Specification
Brand | Marposs |
Measuring Range | (1 mm, 2mm, 3 mm, 5 mm, 10 mm) |
Tension Mode | -+5V,-+10V, 0-10V, Maximum output current -+1 mA |
Typical Consume With Transducer Connected Voltage | Voltage output: -+ 270 mA max. Current output: -+450 mA max. |
If Configured With A Tension Output Signal | (-+12 V)-+12 Vdc -+5% Max. ripple allowed at 100/120 Hz: 50 mVpp |
Bandwidth | Typical 500 Hz |
Dual Filtered And Stabilised | (-+15 V)-+15 Vdc -+5% Max. ripple allowed at 100/120 Hz: 50 mVpp |
Current Mode | (4/20 mA) Load impedance max. 250 ohm, min. 100 ohm |
Type Of Power Supply | (-+ 15Vdc -+ 5%, -+ 12Vdc -+ 5%, 24Vdc -+ 10%) |
Gain Drift | max 0.04% degree C of the end scale |
Offset Drift | max 0.01% degree C of the end scale |
Linearity Error | max 0.1% of the end scale |
Relative Operating Humidity | (without condensation): 20% / 80% |
Operating Temperature | 0 degree / + 50 degree C |
Transducer Voltage Supply | Typical 3.4 Vrms |
Transducer Frequency | Typical 5.0 KHz |
Power Supply Voltage | -+ 15Vdc -+ 5%, -+ 12Vdc -+ 5%, 24Vdc -+ 10% |
Tension Output Signal | -+ 5V, -+ 10V, 0-10V (maximum output current -+ 1 mA) |
Mechanical Bandwidth | typical 500 Hz |
Transducer Power Supply Current | max 30 mA |
Power Supply Rejection Ratio | (gain+offset) max 0.04% / V of the end of scale (voltage: -+ 15V) |
Output Ripple AF Spike Excluded | max 10 mV for voltage output (20 micro A rms for current output for the 1 channel version; |
Current Output Signal | 4/20 mA (load impedance max. 250 ohm, min. 100ohm) |
Protection Degree | (with connectors plugged in) IP54 |
Operating Relative Humidity | (not condensing) 20% - 80% |
Storing Relative Humidity | 10% - 95% |
Channels | (1, 4, 8) Number |
Storing Temperature | -25 Degree /+ 75 Degree C |
Weight | 0,8 kg |
Type Of Transducer | (LVDT/HBT) |
Product Description
TCI is a line of signal conditioning interfaces consisting of three models with either one, four or eight channels.
It has been developed with technical and functional specifications particularly suited to convert a position or a dimensional measurement, performed by LVDT or HBT transducers, in a signal compatible with most of the analogue data acquisition cards. The unit output provides a direct electric signal (voltage or current), proportional to the measurement value of the sensor connected in input.
The output signal can be acquired by PLC analogue cards to control and manage process automations and for further processing by SCADA supervision systems.
The TCI interfaces are PLUG&PLAY units and therefore are supplied already calibrated for the model of sensor being used. This ensures that the machine down times are drastically reduced as the installation and maintenance operations are simplified.
Features
- easy to install as it is calibrated during the production based on the model of sensor being used
- compatible with most of the sensors available on the market
- highly customisable
- reliable and sturdy
- one channel
- four channels
- eight channels
About the Company
Seller Contact Details
147, Manesar, Imt, Sector 7, Gurgaon - 122051, Gurugram, Haryana, India
Get Directions