15 to 50 m Single Phase Monoblock Submersible Pump Sets, 1 to 5 HP, 100 - 500 LPM
Motor Horsepower | 1 to 5 HP |
Motor Phase | Single Phase |
Power Source | Diesel |
Maximum Discharge Flow | 100 - 500 LPM |
Maximum Head | 15 to 50 m |
The motors are wet type, water cooled, water lubricated squirrel cage type 2 pole, single phase induction motors with rewindable option. They are equipped with specially designed axial thrust bearing to take thrust loads with minimum wear and tear. The motors run on water lubricated high graded bronze metal bushes which ensures long life cycle time with minimal maintenance. The rated power supply for the pumps is 230 V.AC, 50Hz. However, superior quality winding materials enable them to withstand wide voltage fluctuations.Available in the range from 0.5 hp to 3.0 hp with head range from 6 mtr. to 30 mtr., flow rate range 30 lpm to 1000 lpm and outlet size range from 1(25 mm) to 2½”(65 mm).
Harihar Industries
Product Details
Company Details
Product Specification
Motor Horsepower | 1 to 5 HP |
Motor Phase | Single Phase |
Power Source | Diesel |
Maximum Discharge Flow | 100 - 500 LPM |
Maximum Head | 15 to 50 m |
Motor Speed (RPM) | 120-1100lpm |
Fluid Temperature Range | 40 C |
Product Description
The pumps are centrifugal, single stage, horizontal type suitable for transfer of cold, clear, fresh water with max. temperature 40°C. Built with radial flow impeller rotates on motor shaft, surrounded by volute casing mounted on the motor bracket forming monoset configuration.
The motors are wet type, water cooled, water lubricated squirrel cage type 2 pole, single phase induction motors with rewindable option. They are equipped with specially designed axial thrust bearing to take thrust loads with minimum wear and tear. The motors run on water lubricated high graded bronze metal bushes which ensures long life cycle time with minimal maintenance.
The rated power supply for the pumps is 230 V.AC, 50Hz. However, superior quality winding materials enable them to withstand wide voltage fluctuations.
Available in the range from 0.5 hp to 3.0 hp with head range from 6 mtr. to 30 mtr., flow rate range 30 lpm to 1000 lpm and outlet size range from 1"(25 mm) to 2½"(65 mm).
About the Company
We take a pleasure to introduce ourselves as one of the reputed water pumps exporters, manufacturers and suppliers in India. Our pump manufacturing unit is based at Ahmadabad-an engineering hub in western India. Spread over an active production space area about 770 square metre equipped with all modern machinery, our pump manufacturing process is looked after by technocrats capable to cater any technical challenge asked by our vast customer base depending upon their variable needs of technical parameters such as head, discharge and power supply.
We only cater bulk inquiries for states other then Gujarat . We will be pleased to cater traders from all over India.
Retail inquires are accepted from Gujarat Only .
Seller Contact Details
295,kathwada Gidc Estate,4 Kathwada,ahmedabad, Kathwada Ahmedabad - 382430, Gujarat, India
Get Directions