Motorised Rolling Shutter
Curtain Profile | Optional = Corrugation / Flat / Ribbed |
Curtain Panel Size | 75mm wide |
Curtain Panel | The panel made of 1.0mm thick CRCA steel |
Hood Cover Size | 25 x 25 x 3 mm |
Hood Cover Thickness | 0.8 mm |
Features:
Can integrate with bms, fire alarms system or dock levelers
- Epdm profiles are fitted at bottom edge to seal the floor and protect from wind and water
* Higher dimension on request
* Available as motorized & manual operated version
* Various types of windows (transparent / louvers) to suit your specific requirement
* Various ral colors available as option
Surface Finish:
* Painting: 2 Coats (each coat of 35 microns DFT) of EPOXY polyamide based enamel finish of approved color and make over a Coat (each one coat 25 microns DFT) of EPOXY polyamide based red oxide zinc phosphate primer
* Options Available: Perforation in Slat Profile / Rolling Grill
* Accessories: Option - Flashing Light / Door line Safety Photocell
* Operating Switch: Option - Push Button from inside / or do you need Outside
Control Type: * Optional = Dead man / Pulse Control
Drive Unit & Mounting Type:
* Electric Motor (Imported German Make) (Single Phase/Three Phase) - Direct Mounting on Shaft 2)
* Electric Motor (Imported China make) (single phase / three phase) - Indirect Mounting - Sprocket chain arrangement
Emergency Operation:
* Option = Manual Hand Driven / Chain Wheel Drive
* Option = Push Button / Key Switch From Outside
Integration Optional:
* Option = need to interlock or integrate with other door or machine or Equipment
* Option = Remote Control with receiver
Installation Constraint any:
* Need to be check = space requirements + substructure + Mounting access + Access in the event of power cut
Product Details
Company Details
Product Specification
Curtain Profile | Optional = Corrugation / Flat / Ribbed |
Curtain Panel Size | 75mm wide |
Curtain Panel | The panel made of 1.0mm thick CRCA steel |
Hood Cover Size | 25 x 25 x 3 mm |
Hood Cover Thickness | 0.8 mm |
Mounting Surface | Guides Optional = On Concrete/Steel / Masonry |
Mounting Location Area | Optional = Inside area / Outside area |
Curtain Material | Optional = MS / GI / SS / AL |
Wind Resistances | 90 Km/hrs |
Opening Direction | Vertical - from bottom to Top |
Opening Closing Speed | 0.1 m/sec |
Roller Shaft Pipe Diameter | -100 to 300 mm (WxH) |
Side Brackets | MS Plate 3 mm to 10 mm thick |
Slat Thickness | 0.9 mm to 1.2 mm (As per IS 6248) |
Side Guide Profile | MS." U" Shaped profile 65 mm -200 mm x 3 mm thick |
Bottom Profile | MS. Plate 100 mm x 2.5 mm thick |
Product Description
Features:
-
Can integrate with bms, fire alarms system or dock levelers
-
Epdm profiles are fitted at bottom edge to seal the floor and protect from wind and water
-
Higher dimension on request
-
Available as motorized & manual operated version
-
Various types of windows (transparent / louvers) to suit your specific requirement
-
Various ral colors available as option
Surface Finish:
- Painting: 2 Coats (each coat of 35 microns DFT) of EPOXY polyamide based enamel finish of approved color and make over a Coat (each one coat 25 microns DFT) of EPOXY polyamide based red oxide zinc phosphate primer
- Options Available: Perforation in Slat Profile / Rolling Grill
- Accessories: Option - Flashing Light / Door line Safety Photocell
- Operating Switch: Option - Push Button from inside / or do you need Outside
Control Type:
- Optional = Dead man / Pulse Control
Drive Unit & Mounting Type:
- Electric Motor (Imported German Make) (Single Phase/Three Phase) - Direct Mounting on Shaft 2)
- Electric Motor (Imported China make) (single phase / three phase) - Indirect Mounting - Sprocket chain arrangement
Emergency Operation:
- Option = Manual Hand Driven / Chain Wheel Drive
- Option = Push Button / Key Switch From Outside
Integration Optional:
- Option = need to interlock or integrate with other door or machine or Equipment
- Option = Remote Control with receiver
Installation Constraint any:
- Need to be check = space requirements + substructure + Mounting access + Access in the event of power cut
About the Company
Established in 2012 in Pune (Maharashtra, India), we “NIHVA Technologies Pvt. Ltd.”are the prominent Manufacturer, Importer, Exporter of a comprehensive assortment of Hangar Door, Material Handling Equipments, Rolling Shutter and much more. The offered products are highly appreciated among our customers for their attributes like eye-catching design, waterproof, easy to maintain, long lasting, moisture resistance and easy to use. Further, our offered product is checked on well-set parameters of quality in order to provide a perfect range at the clients' end. we also service provider of Door Installation Service. We are also the Service Provider of Door Installation Service.
Under the adept guidance and direction of our Manager, “Mr. Mayur Derle”, we are able to attain the maximum satisfaction of our clients.
Seller Contact Details
No. 187, G Block, 1st Floor, Thermax Chowk, Chinchwad Pune - 411019, Maharashtra, India
Get Directions