MXC Stainless Steel Velocity Jet
| Body Material | Stainless Steel |
| Air Inlet Size (NPT) | 1/4" |
| Nozzle Size (mm) | 1.4 mm |
| Brand | MXC |
| Power | 2100 HP |
Details:
The HVOF (High Velocity Oxygen Fuel) Thermal Spray Process is basically the same as the combustion powder spray process (LVOF) except that this process has been developed to produce extremely high spray velocity. There are a number of HVOF guns which use different methods to achieve high velocity spraying. One method is basically a high pressure water cooled HVOF combustion chamber and long nozzle. Fuel (kerosene, acetylene, propylene and hydrogen) and oxygen are fed into the chamber, combustion produces a hot high pressure flame which is forced down a nozzle increasing its velocity. Powder may be fed axially into the HVOF combustion chamber under high pressure or fed through the side of Laval type nozzle where the pressure is lower. Another method uses a simpler system of a high pressure combustion nozzle and air cap. Fuel gas (propane, propylene or hydrogen) and oxygen are supplied at high pressure, combustion occurs outside the nozzle but within an air cap supplied with compressed air. The compressed air pinches and accelerates the flame and acts as a coolant for the HVOF gun. Powder is fed at high pressure axially from the centre of the nozzle.
Resulting Advantages:
- Process of choice for high quality wear resistant coatings
- Highest density thermal spray coatings
* Outstanding adhesion
* Extremely High Bond Strength
* Uniform Coating
* Excellent Wear Resistance (Carbides)
* Excellent Corrosion Resistance
* Low Application Temperature
* Low Residual Stresses
* Higher Impact Resistance
* Neutral to Compressive Residual Stress (Greater thickness capability)
* Less Chipping & Peeling vs. other Thermal Spray Processes
Metallizing Export Company LLP
Product Details
Company Details
Product Specification
| Body Material | Stainless Steel |
| Air Inlet Size (NPT) | 1/4" |
| Nozzle Size (mm) | 1.4 mm |
| Brand | MXC |
| Power | 2100 HP |
Product Description
Details:
The HVOF (High Velocity Oxygen Fuel) Thermal Spray Process is basically the same as the combustion powder spray process (LVOF) except that this process has been developed to produce extremely high spray velocity. There are a number of HVOF guns which use different methods to achieve high velocity spraying. One method is basically a high pressure water cooled HVOF combustion chamber and long nozzle. Fuel (kerosene, acetylene, propylene and hydrogen) and oxygen are fed into the chamber, combustion produces a hot high pressure flame which is forced down a nozzle increasing its velocity. Powder may be fed axially into the HVOF combustion chamber under high pressure or fed through the side of Laval type nozzle where the pressure is lower. Another method uses a simpler system of a high pressure combustion nozzle and air cap. Fuel gas (propane, propylene or hydrogen) and oxygen are supplied at high pressure, combustion occurs outside the nozzle but within an air cap supplied with compressed air. The compressed air pinches and accelerates the flame and acts as a coolant for the HVOF gun. Powder is fed at high pressure axially from the centre of the nozzle.
Resulting Advantages:
- Process of choice for high quality wear resistant coatings
- Highest density thermal spray coatings
- Outstanding adhesion
- Extremely High Bond Strength
- Uniform Coating
- Excellent Wear Resistance (Carbides)
- Excellent Corrosion Resistance
- Low Application Temperature
- Low Residual Stresses
- Higher Impact Resistance
- Neutral to Compressive Residual Stress (Greater thickness capability)
- Less Chipping & Peeling vs. other Thermal Spray Processes
About the Company
We "Metallizing Export Company LLP" are not new but expanded our product line so that you get most of the thermal spraying facilities under one roof. MWC (formally Metallizing Wires and Conductors) have been part of Thermal spray Industry since 1984. Mr. Hariprasad Karwa (Managing Director) is in Thermal Spray Industry since 1975.
MWC also provides a broad, flexible line of automation products for, thermal spray coating applications including FLAME SPRAY, ELECTRIC ARC, PLASMA, HVOF, GRIT BLASTING, and ultra-high pressure WATER JET stripping.
With our wide range of metallizing equipments, auxiliary equipments, consumables, we can provide the right choice for your specific application.
Since thermal spraying is a dynamic industry, new customer requirements are continually arising. We take great pride in our company's performance and ability to adapt to changing industry demands, consistently providing top quality products exceeding customer expectations.
Thermal spray processes can be grouped into four major categories: Flame Spray, Electric Wire-Arc Spray, High Velocity Oxy-Fuel (HVOF) and Plasma-Arc Spray. MWC have different types of Thermal spray Equipments depending up on source of thermal and kinetic energy and form of coating materials. Each process has different cost, materials flexibility and coating performance capabilities.
We export our products in Russia, Europe, Australia, Asia countries and all over the world mostly.
Seller Contact Details
Khasra No 1048/740, Balaji Industrial Area, Basni Jodhpur - 342013, Rajasthan, India
Get Directions