MYK Laticrete 50 mm 3642 Latex Concentrate For Thick Bed Mortar
Get Latest Price
Brand | MYK Laticrete |
Packaging | 5 Ltrs & 20 Ltrs pail. |
Colour | White |
Coverage For Thick bed adhesive | Coverage will be based on following mix design. |
Thickness | 50 mm |
LATICRETE® 3642 Latex Concentrate admix which is diluted with water on site and then mixed with LATICRETE® 226 to make thick bed adhesive, cement plasters, mortar beds and screeds. Also can be used as a primer and bonding agent for subsequent cement based repairs and refurbishment works
Features / Benefits
- Greatly improved compressive strength, when mixed with Cement sand mortars, Laticrete 226 thick bed adhesive.
- Enhanced flexibility in mortars and plasters
* Lower water absorption
* Improved adhesion
* More plastic mortars
* Resistant to thermal and seismic shock
* Can be used as primer for various dry wall boards
* before tile and stone installation.
* Concrete & Concrete Masonry
Substrates
* VDF / Tremix Concrete
* Cement Mortar Beds
* Cement Plaster
* Wood floor**
* Brick Masonry
* Cement Backer Board**
* Cement Terrazzo
* Calcium Silicate Board**
* Gypsum Wallboard**
**Consult the backer board manufacturer's data sheet for the specific recommendations and load bearing capacity of specific board intended for use.
Application
Designed especially for interior and exterior floor and wall installations of cement based mortar modification and to make thick bed adhesive mortar for installation of tiles or stones. It can be used as a primer for cement, gypsum and calcium based drywall boards and plaster, concrete surfaces for subsequent cement based mortar applications and repairs. Can be modified with neat cement to make highly water resistant membrane to curtail capillary rise in brick walls.
APPLICATION
a) Thick bed adhesive
Before placing mortar, apply a slurry bond coat made from Laticrete® 3642 latex concentrate pre-diluted with water 1:1 and mix with cement & sand in the ratio of 1:1.While the slurry bond coat is wet spread mortar & compact well.
For placing tiles apply another slurry bond coat over the mortar bed & install tiles.
In case of traditional system of tiling (Wet on Wet), Laticrete SBA 20, Slurry bond adhesive, mixed with approximately 8 Liters of water is best for installation of tiles. The tiles shall be placed & beaten in the mortar while the slurry bond adhesive is wet and sticky.
b) Floor Screeds
Before placing mortar, apply bonding slurry of LATICRETE® 3642 pre-diluted with water 1:1 and cement: sand mixed in the ratio of 1:1.
While the bonding slurry is wet spread the mortar and compact well.
Follow the standard rules of creating the movement joints for Adhered screeds, Floating screeds and the thicknesses of respective screeds as per the international standards.
For better performance of screeds, it is also recommended to use wire mesh as specified by the engineer at site.
c) Plaster
Plumb, square and true wall with applications of mortar. Level, fill and patch block with site mix mortar or LATICRETE® 226 Thick Bed Mortar Mix gauged with pre- diluted LATICRETE® 3642.
Plasters made with LATICRETE® 3642 can be applied in thicknesses as great as 25 mm without the plaster slumping.
Features / Benefits
- Greatly improved compressive strength, when mixed with Cement sand mortars, Laticrete 226 thick bed adhesive.
- Enhanced flexibility in mortars and plasters
* Lower water absorption
* Improved adhesion
* More plastic mortars
* Resistant to thermal and seismic shock
* Can be used as primer for various dry wall boards
* before tile and stone installation.
* Concrete & Concrete Masonry
Substrates
* VDF / Tremix Concrete
* Cement Mortar Beds
* Cement Plaster
* Wood floor**
* Brick Masonry
* Cement Backer Board**
* Cement Terrazzo
* Calcium Silicate Board**
* Gypsum Wallboard**
**Consult the backer board manufacturer's data sheet for the specific recommendations and load bearing capacity of specific board intended for use.
Application
Designed especially for interior and exterior floor and wall installations of cement based mortar modification and to make thick bed adhesive mortar for installation of tiles or stones. It can be used as a primer for cement, gypsum and calcium based drywall boards and plaster, concrete surfaces for subsequent cement based mortar applications and repairs. Can be modified with neat cement to make highly water resistant membrane to curtail capillary rise in brick walls.
APPLICATION
a) Thick bed adhesive
Before placing mortar, apply a slurry bond coat made from Laticrete® 3642 latex concentrate pre-diluted with water 1:1 and mix with cement & sand in the ratio of 1:1.While the slurry bond coat is wet spread mortar & compact well.
For placing tiles apply another slurry bond coat over the mortar bed & install tiles.
In case of traditional system of tiling (Wet on Wet), Laticrete SBA 20, Slurry bond adhesive, mixed with approximately 8 Liters of water is best for installation of tiles. The tiles shall be placed & beaten in the mortar while the slurry bond adhesive is wet and sticky.
b) Floor Screeds
Before placing mortar, apply bonding slurry of LATICRETE® 3642 pre-diluted with water 1:1 and cement: sand mixed in the ratio of 1:1.
While the bonding slurry is wet spread the mortar and compact well.
Follow the standard rules of creating the movement joints for Adhered screeds, Floating screeds and the thicknesses of respective screeds as per the international standards.
For better performance of screeds, it is also recommended to use wire mesh as specified by the engineer at site.
c) Plaster
Plumb, square and true wall with applications of mortar. Level, fill and patch block with site mix mortar or LATICRETE® 226 Thick Bed Mortar Mix gauged with pre- diluted LATICRETE® 3642.
Plasters made with LATICRETE® 3642 can be applied in thicknesses as great as 25 mm without the plaster slumping.
View Complete Details
Get Latest PriceRequest a quote
TrustSEAL Verified
Leading Supplier
Manufacturer
View Mobile Number
83% Response RateContact Supplier
Product Details
Company Details
Product Specification
Brand | MYK Laticrete |
Packaging | 5 Ltrs & 20 Ltrs pail. |
Colour | White |
Coverage For Thick bed adhesive | Coverage will be based on following mix design. |
Thickness | 50 mm |
Applicable Standards For thickbed adhesive made with Laticrete 226 | ANSI A118.7; EN 13813 |
Time for Heavy Traffic | Greater than or Equal to 72 Hours |
Dry Mortar Density | 1950 - 2100 kg/m 3 |
Pot Life | 1 Hour |
Time for Foot Traffic | Greater than or Equal to 24 Hours |
Recommended Ratio of L-3642 Water (with 50 Kg bag of Laticrete 226 powder) | 1 3 or 1 4 |
Product Description
LATICRETE® 3642 Latex Concentrate admix which is diluted with water on site and then mixed with LATICRETE® 226 to make thick bed adhesive, cement plasters, mortar beds and screeds. Also can be used as a primer and bonding agent for subsequent cement based repairs and refurbishment works
Features / Benefits
Application
Designed especially for interior and exterior floor and wall installations of cement based mortar modification and to make thick bed adhesive mortar for installation of tiles or stones. It can be used as a primer for cement, gypsum and calcium based drywall boards and plaster, concrete surfaces for subsequent cement based mortar applications and repairs. Can be modified with neat cement to make highly water resistant membrane to curtail capillary rise in brick walls.
APPLICATION
a) Thick bed adhesive
Before placing mortar, apply a slurry bond coat made from Laticrete® 3642 latex concentrate pre-diluted with water 1:1 and mix with cement & sand in the ratio of 1:1.While the slurry bond coat is wet spread mortar & compact well.
For placing tiles apply another slurry bond coat over the mortar bed & install tiles.
In case of traditional system of tiling (Wet on Wet), Laticrete SBA 20, Slurry bond adhesive, mixed with approximately 8 Liters of water is best for installation of tiles. The tiles shall be placed & beaten in the mortar while the slurry bond adhesive is wet and sticky.
b) Floor Screeds
Before placing mortar, apply bonding slurry of LATICRETE® 3642 pre-diluted with water 1:1 and cement: sand mixed in the ratio of 1:1.
While the bonding slurry is wet spread the mortar and compact well.
Follow the standard rules of creating the movement joints for Adhered screeds, Floating screeds and the thicknesses of respective screeds as per the international standards.
For better performance of screeds, it is also recommended to use wire mesh as specified by the engineer at site.
c) Plaster
Plumb, square and true wall with applications of mortar. Level, fill and patch block with site mix mortar or LATICRETE® 226 Thick Bed Mortar Mix gauged with pre- diluted LATICRETE® 3642.
Plasters made with LATICRETE® 3642 can be applied in thicknesses as great as 25 mm without the plaster slumping.
Features / Benefits
- Greatly improved compressive strength, when mixed with Cement sand mortars, Laticrete 226 thick bed adhesive.
- Enhanced flexibility in mortars and plasters
- Lower water absorption
- Improved adhesion
- More plastic mortars
- Resistant to thermal and seismic shock
- Can be used as primer for various dry wall boards
- before tile and stone installation.
- Concrete & Concrete Masonry
- VDF / Tremix Concrete
- Cement Mortar Beds
- Cement Plaster
- Wood floor**
- Brick Masonry
- Cement Backer Board**
- Cement Terrazzo
- Calcium Silicate Board**
- Gypsum Wallboard**
Application
Designed especially for interior and exterior floor and wall installations of cement based mortar modification and to make thick bed adhesive mortar for installation of tiles or stones. It can be used as a primer for cement, gypsum and calcium based drywall boards and plaster, concrete surfaces for subsequent cement based mortar applications and repairs. Can be modified with neat cement to make highly water resistant membrane to curtail capillary rise in brick walls.
APPLICATION
a) Thick bed adhesive
Before placing mortar, apply a slurry bond coat made from Laticrete® 3642 latex concentrate pre-diluted with water 1:1 and mix with cement & sand in the ratio of 1:1.While the slurry bond coat is wet spread mortar & compact well.
For placing tiles apply another slurry bond coat over the mortar bed & install tiles.
In case of traditional system of tiling (Wet on Wet), Laticrete SBA 20, Slurry bond adhesive, mixed with approximately 8 Liters of water is best for installation of tiles. The tiles shall be placed & beaten in the mortar while the slurry bond adhesive is wet and sticky.
b) Floor Screeds
Before placing mortar, apply bonding slurry of LATICRETE® 3642 pre-diluted with water 1:1 and cement: sand mixed in the ratio of 1:1.
While the bonding slurry is wet spread the mortar and compact well.
Follow the standard rules of creating the movement joints for Adhered screeds, Floating screeds and the thicknesses of respective screeds as per the international standards.
For better performance of screeds, it is also recommended to use wire mesh as specified by the engineer at site.
c) Plaster
Plumb, square and true wall with applications of mortar. Level, fill and patch block with site mix mortar or LATICRETE® 226 Thick Bed Mortar Mix gauged with pre- diluted LATICRETE® 3642.
Plasters made with LATICRETE® 3642 can be applied in thicknesses as great as 25 mm without the plaster slumping.
Interested in this product?Get Latest Price from the seller
Contact Seller
About the Company
Year of Establishment2001
Legal Status of FirmLimited Company (Ltd./Pvt.Ltd.)
Nature of BusinessManufacturer
Number of Employees501 To 1000 People
Annual TurnoverRs. 100 - 500 Crore
IndiaMART Member SinceFeb 2011
GST36AAACL5557E1ZK
MYK LATICRETE is a leading corporate, bringing contemporary world standards to the tile and stone installation & maintenance industry in India. The company addresses critical needs, and challenges conventional methodology to provide the industry with the widest range of adhesives, grouts, waterproofing, stone care products and wallputty.
A strong, customer-focused approach and a constant quest for impeccable quality has enabled MYK LATICRETE sustain leadership through innovation among its business associates and architects network equally by successfully completed demanding projects across India and SAARC countries.
A strong, customer-focused approach and a constant quest for impeccable quality has enabled MYK LATICRETE sustain leadership through innovation among its business associates and architects network equally by successfully completed demanding projects across India and SAARC countries.
Seller Contact Details
Cella Harish
4th Floor, 8-2-703/a, Banjara Hills, Rd No.12, Leela Gopal Tower, Kukatpally Hyderabad - 500034, Telangana, India
Get DirectionsView Mobile No.
Send SMS
Send Email