13-14.86 sq mtr/ltr/coat on smooth non absorbent surface
Min. 4 -6 hrs (@27 +/-2 Degree Celsius and RH 60 +/-5%)
2 years from the date of manufacturing
Stability Of Thinned Paint
Use within 24 hrs
Upto 30% Volume using water
30 minutes (Surface dry)
Dry Film Thickness
Less than 50 gms/ltr
Nerolac Pearls Lustre Finish WB is water-based special interior wall paint that captures the magic glow of pearls and the intrinsic resilience of the shell. Other benefits associated with the product are a low odour, Excellent washability, stain, Fungal, and Bacteria resistance.
Excellent Grain Pattern
Excellent Stain Resistance
Tough and hard film
Ensure the surface is clean, dry and free from all defective or poorly adhering material, dirt, grease, wax etc.
Remove all loose or poorly adhering materials by rubbing down, using a suitable abrasive paper and thereafter wipe off.
Treat the fungus affected area by using Nerolac Fungicidal solution. Allow reactingfor 6-8 hrs.
Apply a coat of suitable primer followed by putty to level the dents and make the surface uniform.
Apply again a coat of Suitable Primer again.
Then apply two coats of Nerolac Pearls Lustre Finish.
Refer MSDS for "Nerolac Water based Pearls Lustre Finish" for safety measures and precautions.
Store in well ambient conditions, ventilated locations and away from sources of ignition and Fire.
Keep away from children.
In case of eye/skin contact wash with plenty of water
Inhalation/Injection will cause danger. In either move to fresh air and consult medical practitioners in both the cases.
Do not apply when the ambient temperature might drop to levels below 10 degrees C within 4 hrs of application.
New plaster should be allowed to cure for minimum 12 weeks.
Avoid extra thinning for better results.
Can be tinted with Nerolac Hi-Power Universal Stainer before thinning. Do not add more than 5% of Nerolac Hi-Power Stainer. Stir the tinted paint well, after tinting and before application.
The container must be tightly closed when not in use. Stir well and strain before use.
Use safety equipment like rubber or polythene gloves, safety goggles/glasses, and Face mask.
Post Application Instructions
For removing stains, clean with a mild soap solution using a sponge and wipe the surface. Ensure a drying time of 1 week before cleaning.
About the Company
Year of Establishment1920
Legal Status of FirmPublic Limited Company
Nature of BusinessManufacturer
Number of EmployeesMore than 1000 People
Annual TurnoverMore than Rs. 500 Crore
IndiaMART Member SinceAug 2011
We Nerolac Paints are the manufacturer and producer of Interior paint, Exterior paint, Wood paint, Metal paint and Ancillary paints.