Drum Dryers Drum Flaker
Product VideoProduct Brochure

Drum Dryers Drum Flaker

₹ 7,00,000Get Latest Price
Capacity(Litre)
500
Design
Standard
Capacity
100 kg/hr to 1000 kg/hr
Material
MS , Stainless steel , CI
Design Type
Standard
Drum dryers operate by applying a thin layer of the product to be dried to the outside of a rotating drum. The drum is internally heated by steam which quickly evaporates any liquid from the product. After almost one full revolution the remaining dried material is removed from the drum by a knife as a film or powder. Construction of drum dryer
Drum dryer is a moving bed dryer. The unit is constructed from cast iron and stainless steel, providing cleanliness and resistance to chemical attack. The drums are engineered with hard chrome plating or chrome plated over nickel to ensure maximum heat transfer and to accommodate high steam temperatures and pressures, precision machined to provide maximum and reproducible heat transfer throughout its life. The drums are hollow horizontally mounted 0.6 to 3.0 meter in diameter and 0.6 to 4.0 meter in length, whose external surface is smoothly polished. Steam or heating coils can be used inside the drum for heat generation. Heat is transferred by conduction to the material that can be controlled with a thermostat. Drum is rotated with a motor device at 1-10 r.p.m. The drum body of the drum dryer is heated on the inside by steam. Steam heating gives a uniform temperature distribution over the drum surface to provide consistent product quality. The steam condenses on the inside of the drying drum. The condensate is continuously removed from the drum so that the largest possible surface area remains available on the inside of the drum for condensation of the steam. The steam system is a closed system, which means that the product cannot come into contact with the steam or condensate. Depending on the design of the drum dryer, the product is applied continuously as a thin film on the underside or top of the main drum. As the drum turns it is heated on the inside and the product dries on the outside of the drum dryer. The short exposure to a high temperature reduces the risk of damage to the product. The water or solvent evaporates and leaves from the surface of drum. If necessary, the vapor can also be suctioned-off locally around the drum. The dried product layer finally reaches the knife and is scraped-off.Advantages(i) Drum dryer gives a rapid (few seconds) drying and its mass transfer rate is higher.
(ii) The entire material is continuously exposed to uniform heat. This process is characterized by short drying time and minimum product heating.
(iii) The equipment is compact 100% closed system and tailored models are available.
(iv) Their simple operation makes them run with the minimum of training and require no specialist maintenance.
(v) Drum dryers are economical with cheap installation and 24 hour a day continuous production.
(vi) It can have vacuum facilities to prevent dust emission thereby giving a guarantee of optimal hygiene during the complete production process.
(vii) This dryer work with minimum energy consumption and does not require large dust recovery systems such as filters.(viii) The heat is transferred by steam to the (metal) wall, which in turn transfers it to the product on the other side of the wall. All the heat transferred by the wall is used to dry the product and does not leave the machine or chimney unused making this dryer a much more efficient process.
(ix) Using these dryers product supply can be controlled. Furthermore, drums create a kneading effect that prevents the formation of lumps in sticky products.
(x) A perfect distribution over the entire length of the drum makes the system ideal for processing doughy or pasty products.
(xi) The temperature of the drum can be controlled independently for the required drying task by setting the steam pressure and thus are best suited for processing certain heat-sensitive products,
View Complete Details
Get Latest PriceRequest a quote

NSI Equipments Private Limited

Surya Palace Colony, Meerut, Uttar Pradesh
4.5/5 
★★★★★
★★★★★
 (25)
GST09AAACN4683M1ZX
TrustSEAL Verified
Star Supplier
Manufacturer
Company Video
 View Mobile Number 
84% Response Rate
Contact Supplier

Product Details

Company Details

Product Specification

Capacity(Litre)500
DesignStandard
Capacity100 kg/hr to 1000 kg/hr
MaterialMS , Stainless steel , CI
Design TypeStandard
Minimum Order Quantity 1

Product Description

Drum dryers operate by applying a thin layer of the product to be dried to the outside of a rotating drum. The drum is internally heated by steam which quickly evaporates any liquid from the product. After almost one full revolution the remaining dried material is removed from the drum by a knife as a film or powder.

Construction of drum dryer

Drum dryer is a moving bed dryer. The unit is constructed from cast iron and stainless steel, providing cleanliness and resistance to chemical attack. The drums are engineered with hard chrome plating or chrome plated over nickel to ensure maximum heat transfer and to accommodate high steam temperatures and pressures, precision machined to provide maximum and reproducible heat transfer throughout its life. The drums are hollow horizontally mounted 0.6 to 3.0 meter in diameter and 0.6 to 4.0 meter in length, whose external surface is smoothly polished. Steam or heating coils can be used inside the drum for heat generation. Heat is transferred by conduction to the material that can be controlled with a thermostat. Drum is rotated with a motor device at 1-10 r.p.m.

The drum body of the drum dryer is heated on the inside by steam. Steam heating gives a uniform temperature distribution over the drum surface to provide consistent product quality. The steam condenses on the inside of the drying drum. The condensate is continuously removed from the drum so that the largest possible surface area remains available on the inside of the drum for condensation of the steam. The steam system is a closed system, which means that the product cannot come into contact with the steam or condensate. Depending on the design of the drum dryer, the product is applied continuously as a thin film on the underside or top of the main drum. As the drum turns it is heated on the inside and the product dries on the outside of the drum dryer. The short exposure to a high temperature reduces the risk of damage to the product. The water or solvent evaporates and leaves from the surface of drum. If necessary, the vapor can also be suctioned-off locally around the drum. The dried product layer finally reaches the knife and is scraped-off.

Advantages

(i) Drum dryer gives a rapid (few seconds) drying and its mass transfer rate is higher.
(ii) The entire material is continuously exposed to uniform heat. This process is characterized by short drying time and minimum product heating.
(iii) The equipment is compact 100% closed system and tailored models are available.
(iv) Their simple operation makes them run with the minimum of training and require no specialist maintenance.
(v) Drum dryers are economical with cheap installation and 24 hour a day continuous production.
(vi) It can have vacuum facilities to prevent dust emission thereby giving a guarantee of optimal hygiene during the complete production process.
(vii) This dryer work with minimum energy consumption and does not require large dust recovery systems such as filters.

(viii) The heat is transferred by steam to the (metal) wall, which in turn transfers it to the product on the other side of the wall. All the heat transferred by the wall is used to dry the product and does not leave the machine or chimney unused making this dryer a much more efficient process.
(ix) Using these dryers product supply can be controlled. Furthermore, drums create a kneading effect that prevents the formation of lumps in sticky products.
(x) A perfect distribution over the entire length of the drum makes the system ideal for processing doughy or pasty products.
(xi) The temperature of the drum can be controlled independently for the required drying task by setting the steam pressure and thus are best suited for processing certain heat-sensitive products,


Additional Information

Delivery Time 3 months
Production Capacity 2 no. drum dryer per month
Interested in this product?Get Latest Price from the seller
Contact Seller

Product Video


About the Company

Year of Establishment1969
Legal Status of FirmLimited Company (Ltd./Pvt.Ltd.)
Nature of BusinessManufacturer
Number of Employees26 To 50 People
Annual TurnoverRs. 10 - 25 Crore
IndiaMART Member SinceSept 2003
GST09AAACN4683M1ZX
Import Export Code (IEC)05030*****

NSI EQUIPMENTS PVT LTD, an ISO certified company, is one of the Prominent Designers and Manufacturers of Process machinery and equipments & plants for Chemical industries , Pesticide industries , Bulk Drug industries , Dye industries , Reclaimed Rubber industries , Fertilizer industries ,Menthol industries ,Resin industries and other specialty chemical industries for the last 50 years to the service of the nation, employing modern techniques with quality workmanship.

The company strictly adheres to international best practices in its entire fabrication process and strive continuously bring out excellence in its product and service. The company''s fabrication unit is fully equipped with performance driven advanced machineries. The company has a team of qualified professionals who keep track on technological advancements and to upgrade the processes to achieve in economics of scale. With its thorough knowledge of processes, experience, expertise in handling projects, in house manufacturing of wide range of equipments gives it an added advantage of being a single point supplier of equipments to the complete project. NSI Equipments has worked with major leading engineering consultants like M/s. Toyo Engineering India Ltd., M/s. M.N. Dustur & Co. P. Ltd., M/s. FACT Engineering and Design Organisation(FEDO)., M/s. Dalal Mott Macdonald P. Ltd., M/s. Simon India Limited etc.

The various equipments manufactured by our company is as follows

# CENTRIFUGES

# REACTION VESSELS

# RIBBON BLENDERS

# ROTARY VACUUM PADDLE DRYERS

# SPIN FLASH DRYERS

# DRUM DRYERS

# ROTARY DRYERS

# FLUID BED DRYERS

# PADDLE DRYERS

# ROTARY KILNS

# AGITATED NUTSCHE FILTER & DRYER

# AIR CLASSIFYING MILLS

# JET MILLS

# EVAPORATORS

# ROTARY AUTOCLAVES

# BALL MILLS

# BELT CONVEYOR

# BUCKET ELEVATOR

# SCREW CONVEYOR

# CORRUGATED HEAT EXCHANGER

# RESIN PLANTS

Company Video

Drum Dryers Drum Flaker
Drum Dryers Drum Flaker
termsprivacy policy

Seller Contact Details

Lokesh Varshney

159, Saipuram, Opposite Block Development Office, Surya Palace Colony Meerut - 250002, Uttar Pradesh, India

Get Directions
View Mobile No.
Send SMS
Send Email