Perma Polyurethane Waterproofing
₹ 650/ KilogramGet Latest Price
Form | Liquid |
Shelf LIfe | 12 Month |
Solid Content | 80% |
Tear Strength | 14 N/mm2 |
Coverage | 1.4 kg of Perma Elasto Shield PU will cover an area of 1sq/mt |
Description:
- Perma Elasto Shield PU is a single component VOC compliant, ready to use, liquid polyurethane based waterproofing membrane. It is composed of a blend of polyurethane and selected hydrophobic fillers, minerals, gelling agents and special stabilizers. It cures by reaction with humidity, maintains its elasticity and is suitable for use both on horizontal as well as vertical surfaces. Upon curing Perma Elasto Shield PU forms a tough and flexible membrane which is resistant to a wide range of temperatures, oxidation, radiation and Ultra Violet light.
Primary Use:
- Perma Elasto Shield PU is suitable for use in waterproofing roofs, terraces, podium, multi level car parking, terrace gardens, basements etc. It is highly useful in waterproofing wet areas such as sunk slabs of toilets and bathrooms, built up roofs, masonry and concrete walls, bridge decks, metal and plastic roofs and also repairing old roofs.
Advantages:* Perma Elasto Shield PU is non toxic hence complies with green building product requirement.
* Perma Elasto Shield PU is a highly elastic product and forms a rubber like membrane which is capable of withstanding severe expansion, contraction and deck movements.
* The membrane remains crack free under severe exposures to oxidation, ozone, UV light and temperature conditions.
* The product has superior wetting and adhesion properties which ensure superior bond with any kind of substrate and helps in getting over peeling problems.
* Perma Elasto Shield PU when applied adapts to any irregular surface forming a waterproof blanket.
Direction for Use:
* Surface to be waterproofed shall be dry, clean, sound and free of all contaminants which may interfere with adhesion or proper curing .The substrates should not contain holes or cracks and should be dust free. All shrinkage cracks shall be treated with suitable material.
Application:* Perma Elasto Shield PU is spread at the desired thickness onto the prepared surface. The coating is applied from the container using standard roofing brushes, squeegees or airless spray equipment at the recommended coverage rates on properly cleaned and prepared dry substrates. Application of the Perma Elasto Shield PU system should be done in one complete step to create a smooth uniform self leveling surface without cold joints, lines or streaks. Apply the first coat at the rate of 500 micron thickness. Let it dry fully (approximately 4-6 hours should be waited between two layers), then apply the second coat (500 micron thickness) .Waiting time shortens in hot weather and lengthens in cold weather.
Caution:- * Do not mix with water and do not apply on moist surfaces. The surface to be applied should be free of moisture.
Health and Safety:* Wear protective clothing, gloves and goggles.
* Skin: Avoid repeated or prolonged contact, if contact occurs , clean with hand cleaner that removes oil or grease , then clean with soap and water.
* Eyes: Contact could cause irritation. If contact occurs , flush with clean water.
* Inhalation: Can cause dizziness. Remove to fresh air and if breathing difficulty persist administer oxygen.
* Available Pack size :10, 25, 100 and 210 kg
- Perma Elasto Shield PU is a single component VOC compliant, ready to use, liquid polyurethane based waterproofing membrane. It is composed of a blend of polyurethane and selected hydrophobic fillers, minerals, gelling agents and special stabilizers. It cures by reaction with humidity, maintains its elasticity and is suitable for use both on horizontal as well as vertical surfaces. Upon curing Perma Elasto Shield PU forms a tough and flexible membrane which is resistant to a wide range of temperatures, oxidation, radiation and Ultra Violet light.
Primary Use:
- Perma Elasto Shield PU is suitable for use in waterproofing roofs, terraces, podium, multi level car parking, terrace gardens, basements etc. It is highly useful in waterproofing wet areas such as sunk slabs of toilets and bathrooms, built up roofs, masonry and concrete walls, bridge decks, metal and plastic roofs and also repairing old roofs.
Advantages:* Perma Elasto Shield PU is non toxic hence complies with green building product requirement.
* Perma Elasto Shield PU is a highly elastic product and forms a rubber like membrane which is capable of withstanding severe expansion, contraction and deck movements.
* The membrane remains crack free under severe exposures to oxidation, ozone, UV light and temperature conditions.
* The product has superior wetting and adhesion properties which ensure superior bond with any kind of substrate and helps in getting over peeling problems.
* Perma Elasto Shield PU when applied adapts to any irregular surface forming a waterproof blanket.
Direction for Use:
* Surface to be waterproofed shall be dry, clean, sound and free of all contaminants which may interfere with adhesion or proper curing .The substrates should not contain holes or cracks and should be dust free. All shrinkage cracks shall be treated with suitable material.
Application:* Perma Elasto Shield PU is spread at the desired thickness onto the prepared surface. The coating is applied from the container using standard roofing brushes, squeegees or airless spray equipment at the recommended coverage rates on properly cleaned and prepared dry substrates. Application of the Perma Elasto Shield PU system should be done in one complete step to create a smooth uniform self leveling surface without cold joints, lines or streaks. Apply the first coat at the rate of 500 micron thickness. Let it dry fully (approximately 4-6 hours should be waited between two layers), then apply the second coat (500 micron thickness) .Waiting time shortens in hot weather and lengthens in cold weather.
Caution:- * Do not mix with water and do not apply on moist surfaces. The surface to be applied should be free of moisture.
Health and Safety:* Wear protective clothing, gloves and goggles.
* Skin: Avoid repeated or prolonged contact, if contact occurs , clean with hand cleaner that removes oil or grease , then clean with soap and water.
* Eyes: Contact could cause irritation. If contact occurs , flush with clean water.
* Inhalation: Can cause dizziness. Remove to fresh air and if breathing difficulty persist administer oxygen.
* Available Pack size :10, 25, 100 and 210 kg
View Complete Details
Get Latest PriceRequest a quote
Dubans Construction Chemical
Vasai West, Mumbai, Maharashtra
4.5/5 (15)
★★★★★
★★★★★
GST- 27AOCPD5951R1ZG
TrustSEAL Verified
Star Supplier
Wholesale Trader
View Mobile Number
66% Response RateContact Supplier
Product Details
Company Details
Product Specification
Form | Liquid |
Shelf LIfe | 12 Month |
Solid Content | 80% |
Tear Strength | 14 N/mm2 |
Coverage | 1.4 kg of Perma Elasto Shield PU will cover an area of 1sq/mt |
Pack Size | 20 kg |
Brand | Perma |
Pack Type | Bucket |
Code No | 130 |
Country of Origin | Made in India |
Product Description
Description:
- Perma Elasto Shield PU is a single component VOC compliant, ready to use, liquid polyurethane based waterproofing membrane. It is composed of a blend of polyurethane and selected hydrophobic fillers, minerals, gelling agents and special stabilizers. It cures by reaction with humidity, maintains its elasticity and is suitable for use both on horizontal as well as vertical surfaces. Upon curing Perma Elasto Shield PU forms a tough and flexible membrane which is resistant to a wide range of temperatures, oxidation, radiation and Ultra Violet light.
Primary Use:
- Perma Elasto Shield PU is suitable for use in waterproofing roofs, terraces, podium, multi level car parking, terrace gardens, basements etc. It is highly useful in waterproofing wet areas such as sunk slabs of toilets and bathrooms, built up roofs, masonry and concrete walls, bridge decks, metal and plastic roofs and also repairing old roofs.
Advantages:
- Perma Elasto Shield PU is non toxic hence complies with green building product requirement.
- Perma Elasto Shield PU is a highly elastic product and forms a rubber like membrane which is capable of withstanding severe expansion, contraction and deck movements.
- The membrane remains crack free under severe exposures to oxidation, ozone, UV light and temperature conditions.
- The product has superior wetting and adhesion properties which ensure superior bond with any kind of substrate and helps in getting over peeling problems.
- Perma Elasto Shield PU when applied adapts to any irregular surface forming a waterproof blanket.
Direction for Use:
- Surface to be waterproofed shall be dry, clean, sound and free of all contaminants which may interfere with adhesion or proper curing .The substrates should not contain holes or cracks and should be dust free. All shrinkage cracks shall be treated with suitable material.
Application:
- Perma Elasto Shield PU is spread at the desired thickness onto the prepared surface. The coating is applied from the container using standard roofing brushes, squeegees or airless spray equipment at the recommended coverage rates on properly cleaned and prepared dry substrates. Application of the Perma Elasto Shield PU system should be done in one complete step to create a smooth uniform self leveling surface without cold joints, lines or streaks. Apply the first coat at the rate of 500 micron thickness. Let it dry fully (approximately 4-6 hours should be waited between two layers), then apply the second coat (500 micron thickness) .Waiting time shortens in hot weather and lengthens in cold weather.
Caution:-
- Do not mix with water and do not apply on moist surfaces. The surface to be applied should be free of moisture.
Health and Safety:
- Wear protective clothing, gloves and goggles.
- Skin: Avoid repeated or prolonged contact, if contact occurs ,clean with hand cleaner that removes oil or grease , then clean with soap and water.
- Eyes: Contact could cause irritation. If contact occurs ,flush with clean water.
- Inhalation: Can cause dizziness. Remove to fresh air and if breathing difficulty persist administer oxygen.
- Available Pack size :10, 25, 100 and 210 kg
Interested in this product?Get Latest Price from the seller
Contact Seller
About the Company
Year of Establishment2015
Legal Status of FirmIndividual - Proprietor
Nature of BusinessWholesale Trader
Number of EmployeesUpto 10 People
Annual TurnoverRs. 2 - 5 Crore
IndiaMART Member SinceFeb 2016
GST27AOCPD5951R1ZG
Established in the year 2015 at Mumbai, Maharashtra, we “Dubans Construction Chemical" are a Sole Proprietorship based firm, engaged as the foremost Distributor/ Channel Partner And Wholesaler of Waterproofing Chemicals, Adhesive And Grouts, etc. Our products are high in demand due to their premium quality and affordable prices. Furthermore, we ensure to timely deliver these products to our clients, through this we have gained a huge clients base in the market.
Seller Contact Details
Sachin Jay Prakash Dubey
Shop 4, Vishranti App., Anand Nagar, Vasai West, Vasai West Mumbai - 401202, Maharashtra, India
Get DirectionsView Mobile No.
Send SMS
Send Email