Manideep Techno Coats

Cherlapally, Rangareddy, Telangana
GST36AARPM2738A2ZP
Verified Plus Supplier
Service Provider
 View Mobile Number 
90% Response Rate
Contact Supplier
  • Legal Status of Firm

    Individual - Proprietor

  • Year of Establishment

    2011

  • Annual Turnover

    Rs. 5 - 10 Crore

  • Indiamart Member Since

    Jan 2011

Phosphating Services

Get Latest Price

Manganese Phosphating:
Manganese phosphate coating has the highest hardness and superior corrosion and wear resistances of general phosphate coatings.
Manganese phosphating is extensively employed to improve the sliding properties of engine, gear, and power transmission systems. The use of manganese phosphated coatings for improved corrosion resistance can be found in virtually all branches of the metal working-industry. Typical examples mentioned here include motor vehicle components in brake and clutch assemblies, engine components, leaf or coil springs, drill bits, screws, nuts and bolts, washers, anti-vibration washers, tools, magnet cores, casting interiors and many other small items. Manganese phosphate coatings for conferment of good corrosion resistance, whether a post-treatment such as oil application is to be used or not, are invariably applied by the immersion method. The processing sequence can be summarized as follows: The degreasing and cleaning are usually done with strongly alkaline cleaners at concentrations of 1-5% and temperatures 65-95"C.Treatment times range from 5-15 minutes. In recent years, a highly effective activating pre-rinse has been developed for manganese phosphates which permits alkaline cleaning and pickling of the work, without the penalty of coarse-crystalline phosphate formation. This is based on a finely-dispersed manganese phosphate at concentrations 1-2 g/l. Manganese phosphating is mainly by immersion. Treatment times range from 5-20 minutes, the optimum time depending on the surface condition. The bath operating temperature is around 95"Cand only in special cases can satisfactory coatings be formed at temperatures around 80"C The phosphated components, after drying, are immersed in the oilor lubricant baths for 0.5-2 minutes, allowed to drain. The thickness of the resulting oil film depends on the oil used and its concentration. Manganese phosphating as a wear protection measure is widely used in the auto industry. Gearwheels in the gearbox, crown and pinion gears in the differential, cam-shafts, valves and valve-steams as well as pistons in larger diesel engines are frequently treated in this way. In other industries, the process is used to treat components in refrigerator compressors or oil pumps and their associated hydraulic rams for vehicle assembly plants. The coating weight and crystal size of the manganese phosphate coatings are influenced to an even greater extent than in zinc phosphating by the mechanical, thermal, and chemical pretreatment of the workpiece surface prior to phosphating. For example, cleaning in alkaline aqueous cleaning agents or pickling in acids produces coatings with a much coarser texture. Even after such treatments, however, fine crystalline phosphate coatings are still obtainable if the workpieces are prerinsed in an activation rinse prior to the phosphating.

View Complete Details
Get Latest PriceRequest a quote
Phosphating Services

Product Details

Company Details

Product Description

Manganese Phosphating:

Manganese phosphate coating has the highest hardness and superior corrosion and wear resistances of general phosphate coatings.

Manganese phosphating is extensively employed to improve the sliding properties of engine, gear, and power transmission systems. The use of manganese phosphated coatings for improved corrosion resistance can be found in virtually all branches of the metal working-industry. Typical examples mentioned here include motor vehicle components in brake and clutch assemblies, engine components, leaf or coil springs, drill bits, screws, nuts and bolts, washers, anti-vibration washers, tools, magnet cores,casting interiors and many other small items.

Manganese phosphate coatings for conferment of good corrosion resistance, whether a post-treatment such as oil application is to be used or not, are invariably applied by the immersion method. The processing sequence can be summarized as follows:

The degreasing and cleaning are usually done with strongly alkaline cleaners at concentrations of 1-5% and temperatures 65-95"C.Treatment times range from 5-15 minutes.

In recent years, a highly effective activating pre-rinse has been developed for manganese phosphates which permits alkaline cleaning and pickling of the work, without the penalty of coarse-crystalline phosphate formation. This is based on a finely-dispersed manganese phosphate at concentrations 1-2 g/l.

Manganese phosphating is mainly by immersion. Treatment times range from 5-20 minutes, the optimum time depending on the surface condition. The bath operating temperature is around 95"Cand only in special cases can satisfactory coatings be formed at temperatures around 80"C

The phosphated components, after drying, are immersed in the oilor lubricant baths for 0.5-2 minutes, allowed to drain. The thickness of the resulting oil film depends on the oil used and its concentration.

Manganese phosphating as a wear protection measure is widely used in the auto industry. Gearwheels in the gearbox, crown and pinion gears in the differential, cam-shafts, valves and valve-steams as well as pistons in larger diesel engines are frequently treated in this way. In other industries, the process is used to treat components in refrigerator compressors or oil pumps and their associated hydraulic rams for vehicle assembly plants.

The coating weight and crystal size of the manganese phosphate coatings are influenced to an even greater extent than in zinc phosphating by the mechanical, thermal, and chemical pretreatment of the workpiece surface prior to phosphating. For example, cleaning in alkaline aqueous cleaning agents or pickling in acids produces coatings with a much coarser texture. Even after such treatments, however, fine crystalline phosphate coatings are still obtainable if the workpieces are prerinsed in an activation rinse prior to the phosphating.


Interested in this product?Get Latest Price from the seller
Contact Seller

About the Company

Year of Establishment2011
Legal Status of FirmIndividual - Proprietor
Nature of BusinessService Provider
Number of Employees26 To 50 People
Annual TurnoverRs. 5 - 10 Crore
IndiaMART Member SinceJan 2011
GST36AARPM2738A2ZP

Manideep Techno Coats was established in 2011 and has grown to a strength of 40 people with a working area of 10,000 square feet. Our business is barrel and rack plating of precious and semi-precious metals. We believe that our long-term success is based on providing our client with a predictably good and consistent level of quality that will meet or exceed their specifications. The MTC Performance Guarantee assures that this is met through our trained staff of plating professionals and certification process. Additionally, our sales staff works closely with our clients to provide acceptable lead times along with competitive pricing. We understand that your customer is our customer and we invite the opportunity to work with you in this team-based approach to develop close relationships. MTC is an expert in metal finishing and metal plating company. MTC offers a variety of Electroplating Processes for metal plating jobs
Our Story
Manideep Techno Coats is a business to business Electroplating Industry. We are focused on plating of small to medium sized parts for technical and performance-oriented applications. The industries we serve include, but are not limited to: Aerospace, Defence, Electrical, Electronics, Medical and Microwave Products.
Our strength is the plating of small, medium-sized parts, and delicate items. We employ a variety of traditional barrel and rack plating methods, and also several proprietary methods which we have developed in response to unique customer needs. We pride ourselves on being process innovators. Many customers have been served whose application did not seem at first to lend itself to consistent electroplating. We've solved a lot of problems where others have not succeeded.

What We Do
We are ideally positioned and adept at providing supply chain management for your part supply needs. We will work as your agent, technical and logistical, to provide the perfect, consistent part, with on-time and on-budget delivery.
We utilize statistical process control methods and tools to ensure that our output is consistent and predictable. We understand that what a customer needs is a supplier that serves the MTC with a predictable and satisfactory service at a competitive price. Predictable and consistent are values that apply both to the quality of the electroplating and also to the quality of our service. On-time delivery of a product fit for your use is what we do. Request a quote for rhodium plating, gold plating, silver plating, and other plating services now!
Customized Plating for Gold, Silver and More
Manideep Techno Coats has engineered the chemistry and production processes to be flexible to our clients needs. We recognize that not all parts or components need the standard MIL or ASTM specifications for finishing. Therefore, our staff of professionals is equipped with the tools to provide the metal finish combinations that will meet your varying needs.
Metal finishes such as gold electroplating require different levels of lubricity, hardness or consistent coverage. Manideep Techno Coats employs patented electroplating processes of part and component preparation, heating and baking.
Prototyping
Ongoing development of parts and components are our client’s toughest challenges. Manideep Techno Coats recognizes this challenge and is prepared to work jointly to optimize your prototype electroplating development. Our combination of tenure in chemistry, electroplating process and industry experience provides a competent mix of talent in identifying effective alternatives.

Phosphating Services
Phosphating Services
termsprivacy policy

Seller Contact Details

Mr Suresh Kumar Manda

Plot No.6, Ida, Phase-3, Cherlapally, Cherlapally Rangareddy - 500051, Telangana, India

Get Directions
View Mobile No.
Send SMS
Send Email