Smooth and Matt Off White Porbandar Chalk Powder, Grade: Technical Grade, Packaging Size: 1kg

Product Details
Packed By: Samsree Chemicals, Vandiyur, Madurai-20
Features
Water Resistant
Prevents Flaking Of Paints
Strong Bond with Base Plaster
ideal for internal and external walls
Features
Whitest putty
Strong bonding to the base plaster
Smooth finish
Imparts high coverage
Curing not required.
Applied on both interior/exterior surface.
Any kind of paint/distemper can be applied on it.
It is a cementation material it has better adhesiveness and durability.
Advantages
True colour tone of the paint is maintained
No need to apply any kind of primer before application of paint/distemper.
Excellent workability
Paint finish is superior
Smooth matt uniform surface finish
Reduces paint consumption
Avoid frequent repainting
Low consumption of paint
Aesthetic look for ceiling, interior and external wall
Cost-effective
Method Of Application
Surface Preparation
Remove all dirt, loose particle, laitance from the surface with the help of emery stone paper, wire brush or putty- blade. Prior to application of Decotouch wall putty, it is very necessary that the surface should be properly wetted with clean water to ensure good adhesion besides better coverage and easy work ability.
Preparation and mixing
Mix powder to water and not water to powder. Water to plaster ratio is (1 part water and 1.5 part of Gypsum Plaster to be maintained to provide good cohesive workable mix. Mix Gypsum Plaster to water by using electrical hand mixture rod to form uniform lump free paste, install the wooden strip / dhada or install the leveling strip in the area where the ready paste is to be applied. Apply the first coat approx. upto 8 mm to 10 mm of thickness, before the first coat sets rake and cross rake the surface. Fill in any hollow area, Level off and compact the surface, then apply the final finish coat. After complete drying for usually 72 hrs. (Depending on the thickness and humidity), the plain smooth leveled surface is ready for painting application.
 Application
Freshly mixed wall putty should be applied on moist surface in a thin layer with the help of a putty blade or steel trowel. It is essential that the application is done from bottom to upwardly direction with the putty blade or steel trowel. Allow the surface to dry for at least 3-4 hour and apply the second coat as mentioned above. After dry of the second coat allow it to dry for 3-4 days before the application of paint. If required, treated surface can be sanded with 320 no. sand stone paper before application of paint. Maximum 2-3 coats can be applied but the thickness of each coat should not be more then 1 mm. Generally, 1 to 1.5mm coating thickness is advisable for putty application.
Precaution And Safety
During extremely hot weather application finished coat shall be cured by sprinkling of water for 1-2 days for best results. Do not apply thick coat (more than 1-1.5mm) in one go.
Packaging
Available Pack - 40kg, 20kg, 5kg and 1kg