IndiaMART > Paints, Wall Putty & Varnishes > Heat Resistant Paint > Heat Resistant Aluminium Paint
Rama Hr 200 Heat Resisting Aluminium Paint

Rama Hr 200 Heat Resisting Aluminium Paint

Rs 190/Litre Get Latest Price
Color Aluminium
Application Method By Conventional / By Brush
Finish Bright Metallic
Form Of Paint Liquid
Drying Time 4 - 6 hours(Touch Dry)
Packaging Type Drum
Contact SellerAsk for best deal
Get Latest PriceRequest a quote

Shakti Traders

Isanpur, Ahmedabad, Gujarat
View Mobile Number 86% Response Rate
Call +91-7971471712 86% Response Rate
Verified Supplier
Manufacturer
Ask for more details from the seller
Contact Seller

Product Details

Product Specification

Color Aluminium
Application Method By Conventional / By Brush
Finish Bright Metallic
Form Of Paint Liquid
Drying Time 4 - 6 hours(Touch Dry)
Packaging Type Drum
Flash Point Above 23 C
Solids By Volume 23% (Approx.)
Theoretical Spreading Rate 15.3 Sq.metre per litre
Drying Characteristics 4 - 6 hours(Touch Dry ) 15 - 18 hours (Hard Dry)
Corresponding Wet Film Thickness 65 microns
Recommended Dry Film Thickness 15 microns per coat
Interval Before Overcoating 18 hours
Dry Heat Resistance Upto 250 Degree c (continuous)
Pack Size 100 Litre

Product Description

Other Details:
Recommended Use

Supercoat enamel is 1st quality general purpose enamel. Recommended for application over Mid Steel, Aluminium, GI & Wood after proper priming of the surface. It also can be applied over GP Rust Guard 238 for achieving better aesthetics. Not recommended for application in medium and severe corrosive areas. Provides limited corrosion resistance.

Surface Preparation

Degrease and blast clean to SA 2 ½ grade minimum of Swedish specification SIS - 05 - 5900 – 1967. If blast cleaning is not practical make full use of mechanical tools along with manual cleaning and wire brushing to remove loose rust / scale to St 2 or St 3 grade of Swedish specification. Surface should be perfectly clean and dry before painting. As Heat resisting coating above 1000° C, this paint is to be applied directly on cleaned metal surface free from any rust and remnants of any old coating. For other uses (Below 1000°C) this paint should go on appropriate primers.

Mixing

Aluminium paste and medium supplied in proportionate quantities. Mix the contents thoroughly and stir well before and during application. Mixed paint to be used off within 24 hours to maintain uniformity in Rama HR 200.

Uses

Buildings, Structures, Industrial Plants, Chimney Stacks, Pipes Petro-chemical & water tanks, etc

Storage Life

Up to 12 months so long as the material is stored in sealed containers under standard warehouse storage conditions.

Application Method

Stir the Base part thoroughly. Mix the 5 -10% Thinner in the paint as per our recommended ratio by volume. Stir the mix gently to attain homogeneity. Add thinner into the mix, if required depending on the application method and then stir gently for few minutes. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Strain the paint through Nylon filter cloth 400 mesh size and apply uniformly over the surface. All equipments used for above should be properly clean.

Application : By Brush / By Conventional Spray

For Brush application, generally no thinner is required to be added. However under adverse environmental condition about 5% by volume thinner can be added. Apply evenly in crossed manner and ensure the uniformity. Use quality brushes for paint application.

For Conventional Spray application:
  • Thinner : Type 006
  • Addition : 5 - 15%
  • Nozzle Orifice : 1.2mm – 1.5mm
  • Nozzle Pressure : 45 - 55 p.s.i.
Notes
  • This cancels all previous literature on this product and is subject to revision without notice
  • Do not apply when temperature falls below 10° C or rises above 50° C and when relative humidity rises above 90%. Do not apply during rain, fog or mist.
  • The paint should not be applied on hot surface. After complete drying of the final coat the painted surface should be gradually heated to the working temperature
  • Use of thinners other than supplied or approved by Shalimar may adversely affect product performance and void product warranty whether express or implied
  • Paint must not be ''''worked'''' too much in which case it will become greyish and streaky.
Health & Safety

Please refer to the separate safety data sheet available with detailed information.


Interested in this product?Get Latest Price from the seller
Contact Seller

Product Image

Rama Hr 200 Heat Resisting Aluminium Paint

Company Details


About the Company

Year of Establishment2018
Legal Status of FirmIndividual - Proprietor
Nature of BusinessManufacturer
Number of EmployeesUpto 10 People
Annual TurnoverUpto Rs. 50 Lakh
IndiaMART Member SinceMay 2016
GST24CQCPP0828F1Z3
We “Shakti Traders” are a leading Manufacturer of a wide range of Chemical Thinners, Epoxy Primer, PU Paint, etc. Situated in Ahmedabad (Gujarat, India), we have constructed a wide and well functional infrastructural unit that plays an important role in the growth of our company. We offer these products at reasonable rates and deliver these within the promised time-frame. In addition to this, we are also involved in offering best-in-class Floor Screeding And Coating to our esteemed clients. Under the headship of “Mr. Ravi Patel” (Owner), we have gained a huge clientele across the nation.
Send your enquiry to this supplier
I agree to the terms and privacy policy

Seller Contact Details

RAVI PATEL

59- Ankit Society, Ramwadi Tekra
Isanpur
Ahmedabad - 382443, Gujarat, India

Get Directions
View Mobile No.
Call +91-7971471712
Send SMS
Send Email
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Save time! Get Best Deal
I agree to the terms and privacy policy



X
Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price