Red Oxide Metal Primer is a highly durable, water based Cement Primer.
Directions To Use: Number One Red Oxide Metal Primer can be applied by brush, roller or spray.
Surface Preparation: Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking Paint. This can be achieved by brushing with a ujire/stiff coir brush, followed by water jetting if required.Dry sanding, flame cutting and/or yielding of the dry paint film may give rise to dust and/or hazardous fumes. Wet sanding should be used wherever possible, if exposed can be avoided by the provision of the local exhaust ventilation, suitable respiratory protection equipment should be used. For areas severely affected by algae fungus. Avoid application of putty or filing compound uihile painting an exterior surface.
Thinning: Thin 1 Litre of Number One Cement Primer with maximum of 500ml water.
Priming: In case of freshly plastered walls, apply 1 coat of Number One Cement Primer after thinning with water in the ratio of 1 : 0.5 by volume. For better performance Number One Paints Cement Primer is recommended.
Finishing: Apply 2 coats of Number One Premium Emulsion for normal surfaces with 4-6 hours between coats. 3 coats may be required in case of darker colour for further details refer product data sheet.
Ease of Application: Health. Safety And Environmental Security Store in a cool dry well ventilated place away from source of heat, ignition and direct sunlight. Keep the container tightly closed.Keep out of the reach of children, if swallowed seek medical advice immediately and show this container or label.Avoid contact with skin or eyes. Wear suitable gloves. In case of contact with skin, wash immediately with soap and water or a proprietary skin cleansed, do no use solvent thinners or white spirits.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Do not empty into drains. Use only in well ventilated areas. Do not use empty contained for storing food. Remove as much paint as possible from brushes and rollers before cleaning. Harmful to aquatic organisms, may cause long term adverse effects in the aquatic environment. Avoid release to the environment; Refer to special instructions/Safety data sheet. Request
Specifications:
Brand
Number One Paints
Color
Red Oxide
State/Form
Liquid
Surface
MS, Aluminium GI Base
Application
Anti Corrosive
Thinner
Turpentine or Equivalent
Surface Preparation
Ensure surfaces are sound, dry and free from grease, wax and oil. Use a suitable oil and grease remover to clean the surface if necessary. Remove all loose or defective paint back to a !rm edge. In the case of iron and steel, remove all loose scale and rust by thorough scraping and wire brushing
Find products similar to Liquid Red Oxide Metal Primer
A group of young men under the stewardship of Mr.K.Chandrashekar and associate Mr.S.Ganesan, armed with years of technical experience in design, fabrication and commissioning of welding electrodes manufacturing machinery and systems, as well as welding electrode itself, got together to take the technology to the common man. Eureka Systems was thus formed as a partnership company. Turnkey projects including machinery, technical know-how, and trained workmen were offered to small-scale entrepreneurs. We feel proud to announce that more than 26 such systems are serving the Indian Industry for the last fifteen years, and that our entire plant from wire straightening and cutting to extrusion, baking and packing are designed and fabricated by us. We have approved Vendors with high tech machinery, and skilled workmen to keep up strict delivery schedule. Our manufacturing unit serves us well for day-to-day Production planning, Research and Developed and feedback to update the technology in machine building as well as product specialization. Emboldened by the constant exposure to technical challenges and have ventured into manufacturing welding electrodes. The market hither to used to ?High cost-High profile? products, received Eureka?s electrodes with cheer as it was affordable to common man. From partnership, Eureka systems and electrodes grew into a Private Limited Company in the year 1989. Entrepreneurs with proven talents and stalwarts in their respective fields like paper and textile exports found common ground in contributing a sizable share of the venture capital and became directors. It was the beginning of the real growth of the company. Their unstinted support elevated Mr.K.Chandrashekar as Managing Director and Mr.S.Ganesan as Technical Director. The company moved into its own premises fully equipped with Chemical, Physical and Welding Labs.
