Reverse Osmosis Plant, Domestic RO Plant And Industrial RO Plant
Plant Application | Domestic RO Plant, Industrial RO Plant, Institutional RO Plant |
Operation Mode | Automatic |
Capacity (litres per hour) | 1000-2000, 0-200 |
RO Capacity (Liter/hour) | 0-200 (Liter/hour), 1000-2000 (Liter/hour) |
Chiller Cooling Capacity (Tons) | 0.5 ton, 1 ton |
- System
Features: All membrane systems are manufactured in a skid / frame design providing for ease of installation with minimum floorspace requirement. Constructed of welded structural carbon steel tubing, finished with corrosion resistant epoxy paint coating. Stainless steel fastener hardware is standard for corrosion resistance.
- Cartridge Pre-Filtration Vessel: Pre-filtration of the membrane feed is standard on all systems. Filter housing is constructed of 304 stainless steel or per client specifications. Filter cartridges are pure polypropylene with a 5.0-micron nominal rating. System Pressure Pump Standard pressure pumps are constructed 316 stainless steel housing with a glass filled noryl and lexan impeller Pumps are equipped with TEFC motors wired for 230 / 460 VAC voltage and rated for full load, continuous duty.
* Membrane Pressure Vessels: All systems feature membrane pressure vessels constructed of fiberglass reinforced polyester (FRP) with 316 stainless steel side-entry feed / concentrate ports. Standard vessels have a white polyurethane finish. ASME code stamping is available on all pressure vessels.
* Membrane Elements: Standard reverse osmosis (RO) membrane elements are high rejection, thin-film composite (TFC) type in a spiral-wound configuration. Membrane elements are tested at 99.5% average salt rejection. All membrane elements carry a three-year warranty against defects in quality and workmanship.
* Instrumentation: All systems feature a complete instrumentation package for optimal performance monitoring. Each of the following instruments are completely panel-mounted and pre-wired Pre/Post cartridge filter pressure gauges RO feed/interbank pressure gauges Product/reject pressure gauges RO inlet/pump discharge pressure switches Product/reject electronic flow meters Product conductivity monitor System temperature indicator Pump run hour meter
* System Control: Operations of the system are automatically controlled through a comprehensive programmable logic controller (PLC) package housed in a NEMA-4 industrial electrical enclosure. The control system also includes a pre-wired motor starter, operator switches / pushbuttons, and status / alarm indicator lights. Standard systems include the following isolated alarm conditions:– Low inlet pressure– High pump discharge pressure– High RO product conductivity
* System Piping & Valves: All membrane systems are completely pre-piped to the fullest extent and are installation ready. The following valves are provided as standard for accurate flow/pressure control and convenient operation:– Automatic inlet valve to prevent water flow through machine during shutdown– Pressure pump discharge throttle valve– RO reject/recirculation flow control valves– Automatic system flush valve for prevention of membrane fouling and scale formation– Pre/Post cartridge filter housing isolation valves– Inlet, product, and reject sampling valves– Isolation valves and blind ports for use with membrane cleaning systems
Exports To: Myanmar
Product Details
Company Details
Product Specification
Plant Application | Domestic RO Plant, Industrial RO Plant, Institutional RO Plant |
Operation Mode | Automatic |
Capacity (litres per hour) | 1000-2000, 0-200 |
RO Capacity (Liter/hour) | 0-200 (Liter/hour), 1000-2000 (Liter/hour) |
Chiller Cooling Capacity (Tons) | 0.5 ton, 1 ton |
Number of Membranes in RO | 2 |
Material of Construction | FRP, Stainless Steel |
Max Water Recovery Rate | >75 % |
Application | Industry |
Phase | Single, Three |
Voltage | 220 - 380 V |
Power Source | Electric |
Frequency | 50 - 60 Hz |
Product Description
- System Features: All membrane systems are manufactured in a skid / frame design providing for ease of installation with minimum floorspace requirement. Constructed of welded structural carbon steel tubing, finished with corrosion resistant epoxy paint coating. Stainless steel fastener hardware is standard for corrosion resistance.
- Cartridge Pre-Filtration Vessel: Pre-filtration of the membrane feed is standard on all systems. Filter housing is constructed of 304 stainless steel or per client specifications. Filter cartridges are pure polypropylene with a 5.0-micron nominal rating. System Pressure Pump Standard pressure pumps are constructed 316 stainless steel housing with a glass filled noryl and lexan impeller Pumps are equipped with TEFC motors wired for 230 / 460 VAC voltage and rated for full load, continuous duty.
- Membrane Pressure Vessels: All systems feature membrane pressure vessels constructed of fiberglass reinforced polyester (FRP) with 316 stainless steel side-entry feed / concentrate ports. Standard vessels have a white polyurethane finish. ASME code stamping is available on all pressure vessels.
- Membrane Elements: Standard reverse osmosis (RO) membrane elements are high rejection, thin-film composite (TFC) type in a spiral-wound configuration. Membrane elements are tested at 99.5% average salt rejection. All membrane elements carry a three-year warranty against defects in quality and workmanship.
- Instrumentation: All systems feature a complete instrumentation package for optimal performance monitoring. Each of the following instruments are completely panel-mounted and pre-wired Pre/Post cartridge filter pressure gauges RO feed/interbank pressure gauges Product/reject pressure gauges RO inlet/pump discharge pressure switches Product/reject electronic flow meters Product conductivity monitor System temperature indicator Pump run hour meter
- System Control: Operations of the system are automatically controlled through a comprehensive programmable logic controller (PLC) package housed in a NEMA-4 industrial electrical enclosure. The control system also includes a pre-wired motor starter, operator switches / pushbuttons, and status / alarm indicator lights. Standard systems include the following isolated alarm conditions:– Low inlet pressure– High pump discharge pressure– High RO product conductivity
- System Piping & Valves: All membrane systems are completely pre-piped to the fullest extent and are installation ready. The following valves are provided as standard for accurate flow/pressure control and convenient operation:– Automatic inlet valve to prevent water flow through machine during shutdown– Pressure pump discharge throttle valve– RO reject/recirculation flow control valves– Automatic system flush valve for prevention of membrane fouling and scale formation– Pre/Post cartridge filter housing isolation valves– Inlet, product, and reject sampling valves– Isolation valves and blind ports for use with membrane cleaning systems
About the Company
We always try to offer complete customer satisfaction and are indulged in manufacturing and supplying various sorts of fine quality products as per international quality standards. These products are known for their reliability, corrosion resistance, efficiency, strength, better service lives and maximum usage. We offer them customized products and always adhere to their various issues related to cost or delivery. We always develop these products as per internationally leading guidelines and our professionals take care of their quality and maintenance related issues. Use of top notch technology and perfect raw materials make our products highly desired in the market. Further, our state of the art warehousing and packaging facilities are capable of storing the products in excellent conditions.
These products are tested on ISI parameters from the time of procurement of raw materials till the time of product delivery. Our professionals have enough industry exposure and always work as per customers varied specifications. We charge reasonable rates and our ethical policies have helped us in gaining a vast clientele.
Company Video
Seller Contact Details
20b, Shyampukur Street, Shyambazar Kolkata - 700004, West Bengal, India
Get Directions