Sensocon USA Differential Pressure Transmitter Series DPT1-R8 - Range 0 - 250 Pa
| Brand | Sensocon USA |
| Model Number/Name | Series DPT1-R8 - Range 0 - 250 Pa |
| Minimum Order Quantity | 1 Number |
APPLICATIONS DPT-R8 series devices are commonly used in HVAC/R systems for - Fan, blower and filter monitoring - Pressure and flow monitoring - Valve and damper control - Pressure monitoring in clean roomsWARNING- READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS DEVICE.- Failure to observe safety information and comply with instructions could result in PERSONAL INJURY, DEATH AND/ OR PROPERTY DAMAGE.- To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.- To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.- Retain these instructions for future reference.- This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.SPECIFICATIONSPerformance Accuracy(at applied pressure) Ranges Thermal EffectsTemperature compensated across the full spectrum of capabilityOverpressureProof Pressure 100 inWC Burst Pressure 120 inWCZero PointCalibration Automatic with function or Manual push-button Auto-ZeroResponse Time4.0 0.8 sec, Selectable via JumperTechnical Specifications Media CompatibilityDry air or non-aggressive gasesMeasuring Units(select via Jumper) Pa, kPa, mbar, inWC, mmWC Measuring Element PiezoresistiveEnvironmentOperating Temperature 14 122 DegreeF (-10 50 DegreeC) Storage Temperature -4 158 DegreeF (-20 70 DegreeC) Humidity 0 to 95 % rH, non condensingPhysicalCase Dimensions 3.54" x 3.74" x 1.4" (90.0 x 95.0 x 36.0 mm) Weight 5.3 oz (150 g) Mounting 2 each 0.1875" (4.3 mm) screw holes, one slotted Materials Case ABS (UL 94 V-0 Approved) Lid PC (UL 94 V-1 Approved) Protection standard IP54 / NEMA3Display(optional) 3 1/2 Digit LCD Backlit Display 2-Line Display (12 character/line) Size 1.81" W x 0.57" H (46.0 x 14.5 mm)Electrical connections4 screw terminal block Wire 12-24AWG (0.2 - 1.5 mm2Cable EntryStrain Relief M16 Knockout 0.625" (16mm)Pressure Fittings3/16" (5.2mm) barbed brass + High pressure Low pressureElectrical VoltageCircuit 3-wire ([V Out], 24V, GND) Input 24VAC or VDC, +-10% Output 0-10V or 0-5V, selectable via Jumper Power Consumption CurrentCircuit 3-wire (mA Out, 24V, GND) Input 24VAC or VDC, +-10% Output 4
Orifine Filters India
Product Details
Company Details
Product Specification
| Brand | Sensocon USA |
| Model Number/Name | Series DPT1-R8 - Range 0 - 250 Pa |
| Minimum Order Quantity | 1 Number |
Product Description
Sensocon USADifferential Pressure TransmitterSeries DPT1-R8 - Range0 - 250Pa
APPLICATIONS
DPT-R8 series devices are commonly used in HVAC/R systems for - Fan, blower and filter monitoring - Pressure and flow monitoring - Valve and damper control - Pressure monitoring in clean rooms
WARNING
- READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS DEVICE.
- Failure to observe safety information and comply with instructions could result in PERSONAL INJURY, DEATH AND/ OR PROPERTY DAMAGE.
- To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.
- To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.
- Retain these instructions for future reference.
- This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.
SPECIFICATIONS
Performance Accuracy(at applied pressure) Ranges < 0.5 inWC = +-0.01 inWC Ranges 0.5 inWC = +-1.5% inWC Accuracy specifications include general accuracy, temperature drift, linearity, hysteresis, long term stability, and repetition error
Thermal EffectsTemperature compensated across the full spectrum of capability
OverpressureProof Pressure 100 inWC Burst Pressure 120 inWC
Zero PointCalibration Automatic with function or Manual push-button Auto-Zero
Response Time4.0 0.8 sec, Selectable via Jumper
Technical Specifications Media CompatibilityDry air or non-aggressive gases
Measuring Units(select via Jumper) Pa, kPa, mbar, inWC, mmWC Measuring Element Piezoresistive
EnvironmentOperating Temperature 14 122 DegreeF (-10 50 DegreeC) Storage Temperature -4 158 DegreeF (-20 70 DegreeC) Humidity 0 to 95 % rH, non condensing
PhysicalCase Dimensions 3.54" x 3.74" x 1.4" (90.0 x 95.0 x 36.0 mm) Weight 5.3 oz (150 g) Mounting 2 each 0.1875" (4.3 mm) screw holes, one slotted Materials Case ABS (UL 94 V-0 Approved) Lid PC (UL 94 V-1 Approved) Protection standard IP54 / NEMA3
Display(optional) 3 1/2 Digit LCD Backlit Display 2-Line Display (12 character/line) Size 1.81" W x 0.57" H (46.0 x 14.5 mm)
Electrical connections4 screw terminal block Wire 12-24AWG (0.2 - 1.5 mm2
Cable EntryStrain Relief M16 Knockout 0.625" (16mm)
Pressure Fittings3/16" (5.2mm) barbed brass + High pressure Low pressure
Electrical VoltageCircuit 3-wire ([V Out], 24V, GND) Input 24VAC or VDC, +-10% Output 0-10V or 0-5V, selectable via Jumper Power Consumption <1.0W Resistance Minimum 1k
CurrentCircuit 3-wire (mA Out, 24V, GND) Input 24VAC or VDC, +-10% Output 4
Additional Information
| Port Of Dispatch | DELHI |
| Payment Terms | T/T (Bank Transfer) |
About the Company
We are Manufacturing all Type Air Filters Like HEPA Filter,Mini Pleat HEPA Filter, Activated Carbon Filter,Microwave V Filter,Super Fine Filters,AHU Air Filters,Dual Filters,Air Conditioning Filter,Pre Filters Pleated Type,ROD Frame Type Pre Filter,Panel Filter,Pre Filters Ductable Unit,Dual Filters, Nylon Mesh Pre Filter,Chemical Filter,Pre Filter & Fine Filter { 3,5,10,15,20 MICRON FILTER }.
Seller Contact Details
X/852, Chand Mohalla, Iii Flower Street, No. 11, Shahdara Delhi - 110031, India
Get Directions