Single & Three Phase Siemens V20 0.37 KW / 0.5HP VFD
सिंगल और तीन फेज वाला सीमेंस V20 0.37 KW / 0.5HP वीएफडी
₹ 10,043Get Latest Price
| Motor Power (kW) | 0.18 - 1000 kW |
| Brand | Siemens |
| Motor RPM | 50 - 6000 RPM |
| Input Phase | Single Phase & Three Phase |
| Condition | New |
Easy to install
• Push-through and wall mounting – side-by-side possible for both
• USS and Modbus RTU at terminals
• Integrated braking chopper for 7.5 kW to 30 kW (10 hp up to 40 hp)
Easy to use
• Parameter loading without power supply
• Integrated application and connection macros
• Keep Running Mode for uninterrupted operation
• Wide voltage range, advanced cooling design and coated PCBs increase robustness
Easy to save money
• ECO mode for V/f, V2/f
• Can Be used for Hibernation mode
• DC coupling
Additional advantages OF SIEMENS SINAMIC V20 VFD :
• Siemens VFD High availability through automatic restart and flying restart after power failures
• V20 VFD gives Broken belt detection by monitoring the load torque
• Pump protection against cavitation
• Hammer start and blockage clearing modes for clogged pumps
• PID controller for process values (e.g. temperature, pressure, level, flow)
• PID auto tuning to optimize controller parameters
• Hibernation mode stops the motor when demand is low
• Motor staging extends the flow range by adding two more fixed-speed drives (cascade) Frost and condensation protection prevents moisture in motors under extreme environmental conditions
TECHNICAL SPECIFICATIONS OF SIEMENS SINAMIC V20 VFD
Voltage 1AC230V:1AC200V...240V(–10%...+10%)
3AC400V:3AC380V...480V(–15%...+10%)
Maximum output voltage 1AC 230 V: 240 V
3AC 400 V: 480 V
Supply frequency : 50/60 Hz
Overload : 150 % rated output current for 60 s, cycle time 300 s
Output frequency : 0 ... 599 Hz resolution: 0.01 Hz
Efficiency factor : 98 %
Control modes : Voltage/frequency control mode: linear V/f, square law V/f, multi-point V/f Flux current control mode: FCC
APPLICATION OF V20 VFD -
- SOLAR PUMP
- TRADE MILL
* CHEESE WINDER
* TOWER CRANES
* PALLET WRAPPING
* BANDSAW MACHINE
* ZIPPER POUCH MANUFACTURING
* SUPER FINISHING MACHINE
* FLAT KNITTING
* TRAVEL MOTION FOR INDUSTRIAL HOIST
* STONE CUTTING
* BUCKET CONVEYOR
* OZONE GENERATOR
* BISCUIT MANUFACTURING
* SHAKING INCUBATORS
* PAULTRY AND MIXING EQUIPMENT
* MECHANICAL PRESSES
* WATER CIRCULATION SYSTEM
* BLOWER APPLICATION
* FAN APPLICATION
• Push-through and wall mounting – side-by-side possible for both
• USS and Modbus RTU at terminals
• Integrated braking chopper for 7.5 kW to 30 kW (10 hp up to 40 hp)
Easy to use
• Parameter loading without power supply
• Integrated application and connection macros
• Keep Running Mode for uninterrupted operation
• Wide voltage range, advanced cooling design and coated PCBs increase robustness
Easy to save money
• ECO mode for V/f, V2/f
• Can Be used for Hibernation mode
• DC coupling
Additional advantages OF SIEMENS SINAMIC V20 VFD :
• Siemens VFD High availability through automatic restart and flying restart after power failures
• V20 VFD gives Broken belt detection by monitoring the load torque
• Pump protection against cavitation
• Hammer start and blockage clearing modes for clogged pumps
• PID controller for process values (e.g. temperature, pressure, level, flow)
• PID auto tuning to optimize controller parameters
• Hibernation mode stops the motor when demand is low
• Motor staging extends the flow range by adding two more fixed-speed drives (cascade) Frost and condensation protection prevents moisture in motors under extreme environmental conditions
TECHNICAL SPECIFICATIONS OF SIEMENS SINAMIC V20 VFD
Voltage 1AC230V:1AC200V...240V(–10%...+10%)
3AC400V:3AC380V...480V(–15%...+10%)
Maximum output voltage 1AC 230 V: 240 V
3AC 400 V: 480 V
Supply frequency : 50/60 Hz
Overload : 150 % rated output current for 60 s, cycle time 300 s
Output frequency : 0 ... 599 Hz resolution: 0.01 Hz
Efficiency factor : 98 %
Control modes : Voltage/frequency control mode: linear V/f, square law V/f, multi-point V/f Flux current control mode: FCC
APPLICATION OF V20 VFD -
- SOLAR PUMP
- TRADE MILL
* CHEESE WINDER
* TOWER CRANES
* PALLET WRAPPING
* BANDSAW MACHINE
* ZIPPER POUCH MANUFACTURING
* SUPER FINISHING MACHINE
* FLAT KNITTING
* TRAVEL MOTION FOR INDUSTRIAL HOIST
* STONE CUTTING
* BUCKET CONVEYOR
* OZONE GENERATOR
* BISCUIT MANUFACTURING
* SHAKING INCUBATORS
* PAULTRY AND MIXING EQUIPMENT
* MECHANICAL PRESSES
* WATER CIRCULATION SYSTEM
* BLOWER APPLICATION
* FAN APPLICATION
View Complete Details
Get Latest PriceRequest a quote
H & S Innovations (Division Of ITL Industries Limited)
Industrial Area, Indore, Madhya Pradesh
4.2/5 (9)
★★★★★
★★★★★
GST- 23AAACI3932N3ZI
Verified Plus Supplier
Wholesaler
View Mobile Number
78% Response RateContact Supplier
Product Details
Company Details
Product Specification
| Motor Power (kW) | 0.18 - 1000 kW |
| Brand | Siemens |
| Motor RPM | 50 - 6000 RPM |
| Input Phase | Single Phase & Three Phase |
| Condition | New |
| Minimum Order Quantity | 1 |
Product Description
Easy to install
• Push-through and wall mounting – side-by-side possible for both
• USS and Modbus RTU at terminals
• Integrated braking chopper for 7.5 kW to 30 kW (10 hp up to 40 hp)
Easy to use
• Parameter loading without power supply
• Integrated application and connection macros
• Keep Running Mode for uninterrupted operation
• Wide voltage range, advanced cooling design and coated PCBs increase robustness
Easy to save money
• ECO mode for V/f, V2/f
• Can Be used for Hibernation mode
• DC coupling
Additional advantages OF SIEMENS SINAMIC V20 VFD :
• Siemens VFD High availability through automatic restart and flying restart after power failures
• V20 VFD gives Broken belt detection by monitoring the load torque
• Pump protection against cavitation
• Hammer start and blockage clearing modes for clogged pumps
• PID controller for process values (e.g. temperature, pressure, level, flow)
• PID auto tuning to optimize controller parameters
• Hibernation mode stops the motor when demand is low
• Motor staging extends the flow range by adding two more fixed-speed drives (cascade) Frost and condensation protection prevents moisture in motors under extreme environmental conditions
TECHNICAL SPECIFICATIONS OF SIEMENS SINAMIC V20 VFD
Voltage 1AC230V:1AC200V...240V(–10%...+10%)
3AC400V:3AC380V...480V(–15%...+10%)
Maximum output voltage 1AC 230 V: 240 V
3AC 400 V: 480 V
Supply frequency : 50/60 Hz
Overload : 150 % rated output current for 60 s, cycle time 300 s
Output frequency : 0 ... 599 Hz resolution: 0.01 Hz
Efficiency factor : 98 %
Control modes : Voltage/frequency control mode: linear V/f, square law V/f, multi-point V/f Flux current control mode: FCC
APPLICATION OF V20 VFD -
• Push-through and wall mounting – side-by-side possible for both
• USS and Modbus RTU at terminals
• Integrated braking chopper for 7.5 kW to 30 kW (10 hp up to 40 hp)
Easy to use
• Parameter loading without power supply
• Integrated application and connection macros
• Keep Running Mode for uninterrupted operation
• Wide voltage range, advanced cooling design and coated PCBs increase robustness
Easy to save money
• ECO mode for V/f, V2/f
• Can Be used for Hibernation mode
• DC coupling
Additional advantages OF SIEMENS SINAMIC V20 VFD :
• Siemens VFD High availability through automatic restart and flying restart after power failures
• V20 VFD gives Broken belt detection by monitoring the load torque
• Pump protection against cavitation
• Hammer start and blockage clearing modes for clogged pumps
• PID controller for process values (e.g. temperature, pressure, level, flow)
• PID auto tuning to optimize controller parameters
• Hibernation mode stops the motor when demand is low
• Motor staging extends the flow range by adding two more fixed-speed drives (cascade) Frost and condensation protection prevents moisture in motors under extreme environmental conditions
TECHNICAL SPECIFICATIONS OF SIEMENS SINAMIC V20 VFD
Voltage 1AC230V:1AC200V...240V(–10%...+10%)
3AC400V:3AC380V...480V(–15%...+10%)
Maximum output voltage 1AC 230 V: 240 V
3AC 400 V: 480 V
Supply frequency : 50/60 Hz
Overload : 150 % rated output current for 60 s, cycle time 300 s
Output frequency : 0 ... 599 Hz resolution: 0.01 Hz
Efficiency factor : 98 %
Control modes : Voltage/frequency control mode: linear V/f, square law V/f, multi-point V/f Flux current control mode: FCC
APPLICATION OF V20 VFD -
- SOLAR PUMP
- TRADE MILL
- CHEESE WINDER
- TOWER CRANES
- PALLET WRAPPING
- BANDSAW MACHINE
- ZIPPER POUCH MANUFACTURING
- SUPER FINISHING MACHINE
- FLAT KNITTING
- TRAVEL MOTION FOR INDUSTRIAL HOIST
- STONE CUTTING
- BUCKET CONVEYOR
- OZONE GENERATOR
- BISCUIT MANUFACTURING
- SHAKING INCUBATORS
- PAULTRY AND MIXING EQUIPMENT
- MECHANICAL PRESSES
- WATER CIRCULATION SYSTEM
- BLOWER APPLICATION
- FAN APPLICATION
Additional Information
| Item Code | 6SL3210-5BE13-7UV0 |
| Delivery Time | Ready Stock |
| Port Of Dispatch | Indore |
| Packaging Details | standard packing |
Interested in this product?Get Latest Price from the seller
Contact Seller
About the Company
Year of Establishment2012
Legal Status of FirmLimited Company (Ltd./Pvt.Ltd.)
Nature of BusinessWholesaler
Number of Employees11 To 25 People
Annual TurnoverRs. 2 - 5 Crore
IndiaMART Member SinceApr 2015
GST23AAACI3932N3ZI
H&S Innovations (Division Of ITL Industries Ltd.) provides specialized and single point solution for all type of Industrial Electrical items.
Our Product basket completes with following products and Brands-
- SIEMENS - Induction Motor, Gearmotor , Sinamics V20 VFD, Switchgear, Micro Automation products.
- SIEMENS FLENDER - Gearboxes.
- HINDUSTAN ELECTRIC MOTOR - IE3, IE2, EFF2, Flame Proof, Crane Duty, Cooling tower, Textile application, Dual Speed, Torque Motors, Brake Motors, Special type motors.
- BONVARIO- GearMotor, GearBoxes.
- KIRLOSKAR - Monoblock, Vacuum, Special pumps.
- BONFIGLIOLI- Gearmotor, Gearboxes.
- POLYCAB - Wires & Cables
- CROMPTON GREAVES - Motors, Industrial Luminaries.
Seller Contact Details
Shekhar Jain
106 C, Sector B, Sanwer Road, Industrial Area Indore - 452015, Madhya Pradesh, India
Get DirectionsView Mobile No.
Send SMS
Send Email