Slipring FCMA Soft Starter
We are the leading organization in the industry to provide our clients the best quality array of Slipring FCMA Soft Start.
Other details:
- Sakthi Power Innovatives an ISO 9001:2008 Certified Company developed a permanent solution to replace old ‘Resistance’ and Rotor Control Circuit , liquid or chemical starters where the stator control gear is separate
- The main advantage of starter is fully automatic starting of Slipping Induction Motor
* The system consist of inducer wound on special shaped cores
* Eddy currents in the cores are reflected in windings as an impedance which is dependent on rotor frequency
* When power is applied to motor the frequency in the rotor is the same as that in stator .As the machine accelerates the rotor frequency and inducer impedance decreases
* This results a smooth acceleration to full speed at which the point the slipping are short circuited and ensures a constant low Starting current and incremental voltage and torque to the motor to get smooth acceleration
Sakthi Power Innovatives
Product Details
Company Details
Product Description
Other details:
- Sakthi Power Innovatives an ISO 9001:2008 Certified Company developed a permanent solution to replace old ‘Resistance' and Rotor Control Circuit , liquid or chemical starters where the stator control gear is separate
- The main advantage of starter is fully automatic starting of Slipping Induction Motor
- The system consist of inducer wound on special shaped cores
- Eddy currents in the cores are reflected in windings as an impedance which is dependent on rotor frequency
- When power is applied to motor the frequency in the rotor is the same as that in stator .As the machine accelerates the rotor frequency and inducer impedance decreases
- This results a smooth acceleration to full speed at which the point the slipping are short circuited and ensures a constant low Starting current and incremental voltage and torque to the motor to get smooth acceleration
- This achieves very soft and smooth starting load to the crusher, compressors, blower fans, Rubber mills, presses, cranes, Centrifugal fan, Pumps, crane hoist, etc. which helps in optimizing the power source i.e., transformer or generator capacity.
- Optimized power systems gives savings capital in cost and savings in revenue expenditure due to increased efficiencies
- We also provide " The customized solution as per client technical requirements"
Salient Features:
- Complete motor starting engineering solution as a part of presales service to customer.
- Step less smooth acceleration to full speed reduces electrical stress in the motors and mechanical wear throughout the drive
- The system requires only one shorting contactor, reducing the overall system complexity, size and cost
- Heavy Duty Inching and Plug breaking
- Constant Torque and Constant Current Acceleration
- Starting of motor with limited power
- Starting of motor in genets
- Low starting current 1.5 x FLT for 1.5 for 15 seconds
- Micro controller Digital Motor protection for over load, over voltage, under voltage, stall, Locked Rotor, Phase failure, Reverse phase, Asymmetry
- Built in Automatic Step less Operation
- Extremely rugged in construction
- Suitable for extreme weather conditions like dust and desert environment
- No forced cooling required
- Indigenous components and Magnetic Flux control technology
- Virtually no maintenance
- Easy to install and operate
Product Range:
- Type of AC Motors: Slipping Induction Motor
- Power: Up to 200 KW Higher rating are available
- Voltage: 415 V
Ordering Information:
- The Motor Output in KW, Rated voltage, full load current, speed, Rotor voltage, Rotor
- Control supply voltage, Auxiliary supply voltage
- The motor torque speed characteristic
- The load torque speed characteristic
- The inertia of motor rotor as well as machine rotating parts
Additional Information
Item Code | SS-02 |
About the Company
FCMA Soft Starter manufacturers M/s Sakthi Power Innovatives an ISO 9001 : 2008 Certified Company developed a permanent solution to start motor in full load less than 1.5 times of motor full load current. FCMA Soft Starter is step less reduced voltage start which ensures a constant low starting current and incremental voltage and torque to the motor to get smooth acceleration. As the motor speed increases, the controller impedance decreases due to counter emf feed back to achieve constant incremental voltage torque for motor. This achieves very soft and smooth starting of load to Crusher, Compressor, Pumps, Crane hoist Centrifugal fan etc since the starting of motor in full load takes only less than 1.5 times of motor full load current. This helps in optimizing the power source ie, transformer or generator capacity. Optimized power system also gives savings in capital, cost savings and revenue expenditure due to higher efficiency.
We also provide "The customized solution as per clients technical requirements".
Our company has always focused on perpetual improvement- implementing latest technology for the smooth functioning of its facility and providing exceedingly good customer service. Proven past record makes Sakthi Power Innovatives a leader in the field of FCMA Soft Starters.
The Company has acquired Goodwill in every corner of market for its sturdy construction, international quality and all-round performance. Our highly satisfied clients fulfil the purpose of our existence.
Seller Contact Details
Industrial Development Plot, Church Road, Vadackal P.o., Vadackal Alappuzha - 688003, Kerala, India
Get Directions