SPINE BURR SYSTEM AND NEURO BURR SYSTEM, Model Name/Number: NM3600
| Usage/Application | Neuro and Spine Surgery |
| Model Name/Number | NM3600 |
| Speed | 1,00,000rpm |
| Noise Level | 75 |
| Brand | Bojin |
The device is an electrical surgical product for a wide range of operations for neuro and spine.
- Product classification:
Based on the classification of the protection against electric shock, the device is considered a
Nectar Meditech
Product Specification
| Usage/Application | Neuro and Spine Surgery |
| Model Name/Number | NM3600 |
| Speed | 1,00,000rpm |
| Noise Level | 75 |
| Brand | Bojin |
| Length | 15 mm |
| Minimum Order Quantity | 2 Set |
Product Description
- Product classification:
Based on the classification of the protection against electric shock, the device is considered a
general device belonging to the application part of the Ⅰ BF class.
It cannot be used when the flammable anesthetic gas is mixed with flammable air or narcotic or
mixed with oxygen or nitrous oxide.
Operating system: continuous operation with intermittent loading. Starting from cold, operate for
2 minutes in charging condition. Please stop the continuous use, allowing the device to cool down.
After the break, you can continue the operation. - Indications for use:
Minimally invasive operations, extremity, column, neuro, orthopedic.
4 Dangers and precautions
1.Connect the attachment to the micro handpiece before operating the instrument.
2. The instrument must be sterilized before use.
3. The user must have acquired the technical experience necessary to operate this device.
4. Try the instrument before using it. - Instructions for use
1. Connect the electric cable to the instrument console, the light indicator indicates the power on and by pressing the
start key, the monitor indicates the icons of the different and optional operations.
2. Once activated, the instrument shows the PEDAL mode and shows the minimum operating speed; the MANUAL mode
is not shown with the icon.
3. In the pedal control mode, the screen rotation change buttons are not accessible. Press the speed button to change it,
setting the maximum reachable. By pressing the pedal, the rotary speed of the motor increases linearly from the lowest
point to the highest point that was previously set.
4. In manual control mode, press the activation button. Manual control mode is shown with the button icon. The pedal
switch is not accessible. Then, adjust the parameters on the control panel to set the speed and direction of the motor,
press the manual control mode activation button again, the motor will run in the current speed and direction.
5. When the instrument is not in use, please disconnect the power cord.
Product Image
About the Company
Independenly owned, Nectar Meditech Company is formed to create a BRAND of Orthopedic implants, Surgical instruments and hospital related Surgical-non surgical products that utilized the experience of expertise of two doctors who are Directors of this company.
Nectar Meditech is incorporated and established in the year 2017 as strategically diversified company in the field if orthopedic implants only initially. It is managed by 15+ years experienced two doctors, one is Consultant Anesthesiologist and other is Family physician. They have crystal clear foresight and creative innovative vision for hospital related products which make company possible to provide high standard good quality products for every need of doctors and hospitals.
As Director Dr Rajesh Vekariya who is practicing anesthesia consultant in India since last 16 years, he has wide exposure to different hospitals and close relations with surgeons. No one can better understand surgeon need than him, after years of discussion he decided to start Nectar Meditech with the Decision to make available QUALITY products for patients, hospitals and doctors with best SERVICE by providing knowledge of the product and optimum utility training with timely delivery, and making sure keep updated with latest medical knowledge and keep upgrading standards of our products and providing most INNOVATING products.
After our all experience and knowledge used to provide best orthopedic implants and surgical instruments to out India customers ( doctors & hospitals ) since 2017-2021, now we have entered in international market to deliver our best products with rich medical field related knowledge to provide the optimum quality innovative products with best service for our overseas customers for every need of doctor or hospital by providing orthopedic implants, surgical instruments and surgical disposable/non disposable products.
Seller Contact Details
7/278/A/1/4, 1st Floor , Opp Railway Station Surat - 395003, Gujarat, India
Get Directionsneed
details