150mm Galvanized Steel Lintel
₹ 580/ MeterGet Latest Price
Application | Construction |
Thickness | 3mm |
Brand | NEsteel Lintels |
Width | 150mm |
Surface Type | Perforated |
Being a leader in the industry, we are engaged in offering a qualitative range of 150mm Galvanized Steel Lintel to our clients.
Advantages Of Using “NE Lintels:
- NE Lintels are available in standard sizes and customized sizes as required.
- The major advantage that lintels over the prestressed concrete is the strength to weight ratio. Lintels promise better load bearing capacity.
* Easy to use. As such does not need involvement of skilled mason.
* Huge amount of construction time and labour is saved compared to conventional RCC lintel construction practices.
* Since because it is just about placing the readymade lintel atop the window or door and continue with further brickwork, the construction job is completed in a quick time and labour cost is also saved.
* Highly Durable and aesthetically beautiful.
* Resistant to any climatic extremities.
Installation Procedure * NE Lintels must have a minimum end bearing of 150mm on each side of the opening, bedded on mortar. (150mm bearing for openings below 1.8 mtr and 200mm for openings above 1.8 mtr).
* The lintel should be in level along its length and across its width. Masonry built must be laid on a mortar bed and all perpendicular joints to be filled with mortar.
* Temporary propping beneath a steel lintel is practised to facilitate speed of construction. Care should be taken to avoid shock loading on lintels when doing masonry work above it.
* The bracket can be used for bearing of lintel when the wall is not present for bearing purpose. Mark the hole location first then make a drill using 5mm drill bit and then fix bracket by plumbing nails with flat washers.
Steps:
* Lintels shall be simply supported at each solid base using a minimum end bearing of 150-200mm as prescribed for suitable length.
* Check lintels should not be cut to length or used if damaged.
* Lintels must always be used within their weight capacity (see lintels loading table) or other size suggested by us as site situation.
* Mortor should be applied before placing lintel on wall.
* Keep lintel in level along its length and across its width.
* Apply mortor inside lintel before starting masonry work.
* Use props for support at center of the lintel for span above 1 mtr to avoid deflection.
* Do not remove the props until the masonry work touches the slab bottom or rigid surface above the lintel and masonry should be totally dry.
* Plastering can be done after masonry work done. No need to use any mesh for bonding. Perforation helps for strong bonding between lintel and mortor.
* If wall is not present for bearing at another end of the lintel then use bracket of the same lintel width for bearing.
* Mark the hole location first then make a drill using 5mm drill bit. Then fix bracket by using plumbing nails or screws (for screws use pvc plugs) also use flat washers for nail.
Benefits:
* Robust & Rust Proof Design
* Extremely Time Saving
* Cost Saving upto 50%
* Mason can Install it while Masonry work
* Maximum Perforations for strong plaster bonding
* High Strenght to weight ratio
* No curing required
* Easy To Handle due to Light weight
Advantages Of Using “NE Lintels:
- NE Lintels are available in standard sizes and customized sizes as required.
- The major advantage that lintels over the prestressed concrete is the strength to weight ratio. Lintels promise better load bearing capacity.
* Easy to use. As such does not need involvement of skilled mason.
* Huge amount of construction time and labour is saved compared to conventional RCC lintel construction practices.
* Since because it is just about placing the readymade lintel atop the window or door and continue with further brickwork, the construction job is completed in a quick time and labour cost is also saved.
* Highly Durable and aesthetically beautiful.
* Resistant to any climatic extremities.
Installation Procedure * NE Lintels must have a minimum end bearing of 150mm on each side of the opening, bedded on mortar. (150mm bearing for openings below 1.8 mtr and 200mm for openings above 1.8 mtr).
* The lintel should be in level along its length and across its width. Masonry built must be laid on a mortar bed and all perpendicular joints to be filled with mortar.
* Temporary propping beneath a steel lintel is practised to facilitate speed of construction. Care should be taken to avoid shock loading on lintels when doing masonry work above it.
* The bracket can be used for bearing of lintel when the wall is not present for bearing purpose. Mark the hole location first then make a drill using 5mm drill bit and then fix bracket by plumbing nails with flat washers.
Steps:
* Lintels shall be simply supported at each solid base using a minimum end bearing of 150-200mm as prescribed for suitable length.
* Check lintels should not be cut to length or used if damaged.
* Lintels must always be used within their weight capacity (see lintels loading table) or other size suggested by us as site situation.
* Mortor should be applied before placing lintel on wall.
* Keep lintel in level along its length and across its width.
* Apply mortor inside lintel before starting masonry work.
* Use props for support at center of the lintel for span above 1 mtr to avoid deflection.
* Do not remove the props until the masonry work touches the slab bottom or rigid surface above the lintel and masonry should be totally dry.
* Plastering can be done after masonry work done. No need to use any mesh for bonding. Perforation helps for strong bonding between lintel and mortor.
* If wall is not present for bearing at another end of the lintel then use bracket of the same lintel width for bearing.
* Mark the hole location first then make a drill using 5mm drill bit. Then fix bracket by using plumbing nails or screws (for screws use pvc plugs) also use flat washers for nail.
Benefits:
* Robust & Rust Proof Design
* Extremely Time Saving
* Cost Saving upto 50%
* Mason can Install it while Masonry work
* Maximum Perforations for strong plaster bonding
* High Strenght to weight ratio
* No curing required
* Easy To Handle due to Light weight
View Complete Details
Get Latest PriceRequest a quote
TrustSEAL Verified
Star Supplier
Manufacturer
View Mobile Number
57% Response RateContact Supplier
Product Details
Company Details
Product Specification
Application | Construction |
Thickness | 3mm |
Brand | NEsteel Lintels |
Width | 150mm |
Surface Type | Perforated |
Corrosion Resistance | Yes |
Height Of Flange | 75mm |
Weight | 5.98 kg/m |
Shape | U Shape |
Technique | Hot Rolled |
Material | Galvanized Steel |
Product Code | GIL 500x75 B |
Country of Origin | Made in India |
Minimum Order Quantity | 500 Meter |
Product Description
Being a leader in the industry, we are engaged in offering a qualitative range of 150mm Galvanized Steel Lintel to our clients.
Advantages Of Using "NE Lintels":
Installation Procedure
Steps:
Benefits:
Advantages Of Using "NE Lintels":
- NE Lintels are available in standard sizes and customized sizes as required.
- The major advantage that lintels over the prestressed concrete is the strength to weight ratio. Lintels promise better load bearing capacity.
- Easy to use. As such does not need involvement of skilled mason.
- Huge amount of construction time and labour is saved compared to conventional RCC lintel construction practices.
- Since because it is just about placing the readymade lintel atop the window or door and continue with further brickwork, the construction job is completed in a quick time and labour cost is also saved.
- Highly Durable and aesthetically beautiful.
- Resistant to any climatic extremities.
Installation Procedure
- NE Lintels must have a minimum end bearing of 150mm on each side of the opening, bedded on mortar. (150mm bearing for openings below 1.8 mtr and 200mm for openings above 1.8 mtr).
- The lintel should be in level along its length and across its width. Masonry built must be laid on a mortar bed and all perpendicular joints to be filled with mortar.
- Temporary propping beneath a steel lintel is practised to facilitate speed of construction. Care should be taken to avoid shock loading on lintels when doing masonry work above it.
- The bracket can be used for bearing of lintel when the wall is not present for bearing purpose. Mark the hole location first then make a drill using 5mm drill bit and then fix bracket by plumbing nails with flat washers.
Steps:
- Lintels shall be simply supported at each solid base using a minimum end bearing of 150-200mm as prescribed for suitable length.
- Check lintels should not be cut to length or used if damaged.
- Lintels must always be used within their weight capacity (see lintels loading table) or other size suggested by us as site situation.
- Mortor should be applied before placing lintel on wall.
- Keep lintel in level along its length and across its width.
- Apply mortor inside lintel before starting masonry work.
- Use props for support at center of the lintel for span above 1 mtr to avoid deflection.
- Do not remove the props until the masonry work touches the slab bottom or rigid surface above the lintel and masonry should be totally dry.
- Plastering can be done after masonry work done. No need to use any mesh for bonding. Perforation helps for strong bonding between lintel and mortor.
- If wall is not present for bearing at another end of the lintel then use bracket of the same lintel width for bearing.
- Mark the hole location first then make a drill using 5mm drill bit. Then fix bracket by using plumbing nails or screws (for screws use pvc plugs) also use flat washers for nail.
Benefits:
- Robust & Rust Proof Design
- Extremely Time Saving
- Cost Saving upto 50%
- Mason can Install it while Masonry work
- Maximum Perforations for strong plaster bonding
- High Strenght to weight ratio
- No curing required
- Easy To Handle due to Light weight
Interested in this product?Get Latest Price from the seller
Contact Seller
Product Video
About the Company
Year of Establishment1985
Legal Status of FirmLimited Company (Ltd./Pvt.Ltd.)
Nature of BusinessManufacturer
Number of Employees11 To 25 People
Annual TurnoverRs. 1 - 2 Crore
IndiaMART Member SinceAug 2015
GST27AAHCN3376L1ZY
Import Export Code (IEC)AAHCN*****
Established in year 1985, we "Nesteel Lintels Private Limited" is one of the leading Manufacturer, Supplier, Retailer, Service Provider, Wholesaler Trader of Metal Lintels, GI Lintels, Steel Lintel and Metal Lintel Brackets.
A Lintel is one of the most important building components. It is provided to give structural horizontal support to the construction, especially on windows and doors, which are considered to be vulnerable points in the building structure. It is primarily used for load-bearing purpose and to span an opening between the vertical supports. In a span of just few years, Nesteel Lintels Private Limited has earned recognition and reputation in this industry. We are also recognized for superior quality, finesse and perfection in fabrication services, customized design. However, we are primarily known for our supremacy in manufacturing of wide range of Lintels & Brackets.
It is because of our delivery commitment, quality and high business ethics, many reputed builders and giant companies in structural engineering have awarded us handsome contracts for service support in number of their landmark projects.
Under the leadership of our mentor, "Mr. Saurabh Naik" & "Mr. Mayur Naik", we have been able to attain a commendable position in this domain. Their excellent management skills, profound experience, and innovative business ideas has helped us in catering to the huge clientele across the nation. With her sharp engineering acumen and business skills has taken the company to the new heights of success in a short span of time. The journey has just begun. But it has begun with confidence and conviction.
A Lintel is one of the most important building components. It is provided to give structural horizontal support to the construction, especially on windows and doors, which are considered to be vulnerable points in the building structure. It is primarily used for load-bearing purpose and to span an opening between the vertical supports. In a span of just few years, Nesteel Lintels Private Limited has earned recognition and reputation in this industry. We are also recognized for superior quality, finesse and perfection in fabrication services, customized design. However, we are primarily known for our supremacy in manufacturing of wide range of Lintels & Brackets.
It is because of our delivery commitment, quality and high business ethics, many reputed builders and giant companies in structural engineering have awarded us handsome contracts for service support in number of their landmark projects.
Under the leadership of our mentor, "Mr. Saurabh Naik" & "Mr. Mayur Naik", we have been able to attain a commendable position in this domain. Their excellent management skills, profound experience, and innovative business ideas has helped us in catering to the huge clientele across the nation. With her sharp engineering acumen and business skills has taken the company to the new heights of success in a short span of time. The journey has just begun. But it has begun with confidence and conviction.
Seller Contact Details
Saurabh Naik
441, Shukrawar Peth, Shukrawar Peth Pune - 411002, Maharashtra, India
Get DirectionsView Mobile No.
Send SMS
Send Email