TrustSEAL Verified
Leading Supplier
Manufacturer
View Mobile Number
81% Response RateContact Supplier
Legal Status of Firm
Limited Company (Ltd./Pvt.Ltd.)
Year of Establishment
2006
Annual Turnover
Rs. 5 - 10 Crore
Indiamart Member Since
Sep 2014
Staroguard Damp Proof Fibre Reinforced Elastomeric Acrylic Roof Coating
Service Location/City | Pan India |
Form Of Chemicals | Liquid |
Usage/Application | Commercial |
Service Mode | Offline |
Solids By Weight | 54-60% |
We are providing Staroguard Damp Proof Fibre Reinforced Elastomeric Acrylic Roof Coating to our clients.
Staroguard Damp Proof is a fiber reinforced elastomeric liquid applied water proofing membrane. It is formulated with select elastomeric and resilient acrylic polymers and reinforcing polyester fibers. Upon curing, it forms a thick, seamless, durable membrane thus offering ultimate waterproofing.
Benefits
- Waterproofing protection of up to 7 bars hydrostatic pressure.
- Crack-bridging - Effectively bridges cracks up to 2.5 mm
* Reinforced with glass fibers for superior abrasion resistance.
* Strong adhesion to masonry substrates.
* High sheen, brilliant white colour and thick coat results in high levels of heat reflectance.
* Reduces carbon dioxide and chloride ion diffusion thus protecting re-bars against corrosion.
* Single pack, easy to apply and simple re- coating.
* Waterproofing warranty on Terraces and vertical surfaces (please refer to warranty booklet for details)
* Provides surface temperature reduction up to 10°C
* Reinforced with fibers to improve mechanical properties and abrasion resistance.
* Excellent adhesion to substrates like concrete and masonry
* Excellent resistance to water, UV rays and ageing
* Excellent anti-fungal and anti-algal properties
* Acts as an effective barrier against carbon dioxide thus prolonging the life of the structure
Recommended Uses* Can be used for building roofs, terraces, parapet, sunshades and exterior vertical walls. It can also be applied on existing IPS, sound brick-bat coba or cementitious waterproofing.
Directions for Use Horizontal Surface* Prepare the surface by cleaning with a high- pressure water jet/wire brush and ensure that it is free of dust, oil, grease, grime and loose particles etc. In the existing terraces, the substrate must be checked for its soundness, damaged portions & hollow areas must be repaired with Polymer modified mortar. Small cracks 3mm or less should be open out, cleaned & filled with Staro Crack Seal & wider cracks should be filled with Polymer modified mortar. All corners and joints of drain pipes, channels etc. must be treated with polymer modified mortar prior to coating application. Ensure that the coating is applied at least 6 inch inside the drain pipe.
* Horizontal Slab area: Apply self-priming coat (diluted with water in 3:1 ratio by volume). Allow to dry for at least 3-4 hrs prior to application of subsequent coat. Apply two coats of Starogard Damp Proof without dilution to achieve forced coverage of 10 sq ft / ltr for all coats put together. For best performance on terraces, ensure that the product is applied on the entire roof including parapet wall to form a continuous blanket.
Vertical Surface* On vertical surfaces, Starogard Damp Proof is to be applied followed by top coat application in the manner detailed below:
Staroguard Damp Proof Application:* Fresh surface (Must be a cement plaster in sound condition with no debonding. Localized repairs done as per standard civil practices in case it is required). Apply a fresh coat of Staroguard Damp Proof mixed in ratio of 3:1 and applied with a spreading rate of 5.5 Sq meter/Ltr (60 sq feet/ltr). Allow to dry for 4-6 hours and then apply another coat of Staroguard Damp Proof without dilution with a spreading rate of 4.6 to 5.1 Sq meter/Ltr (50- 55 sq feet/ltr).
Staroguard Damp Proof is a fiber reinforced elastomeric liquid applied water proofing membrane. It is formulated with select elastomeric and resilient acrylic polymers and reinforcing polyester fibers. Upon curing, it forms a thick, seamless, durable membrane thus offering ultimate waterproofing.
Benefits
- Waterproofing protection of up to 7 bars hydrostatic pressure.
- Crack-bridging - Effectively bridges cracks up to 2.5 mm
* Reinforced with glass fibers for superior abrasion resistance.
* Strong adhesion to masonry substrates.
* High sheen, brilliant white colour and thick coat results in high levels of heat reflectance.
* Reduces carbon dioxide and chloride ion diffusion thus protecting re-bars against corrosion.
* Single pack, easy to apply and simple re- coating.
* Waterproofing warranty on Terraces and vertical surfaces (please refer to warranty booklet for details)
* Provides surface temperature reduction up to 10°C
* Reinforced with fibers to improve mechanical properties and abrasion resistance.
* Excellent adhesion to substrates like concrete and masonry
* Excellent resistance to water, UV rays and ageing
* Excellent anti-fungal and anti-algal properties
* Acts as an effective barrier against carbon dioxide thus prolonging the life of the structure
Recommended Uses* Can be used for building roofs, terraces, parapet, sunshades and exterior vertical walls. It can also be applied on existing IPS, sound brick-bat coba or cementitious waterproofing.
Directions for Use Horizontal Surface* Prepare the surface by cleaning with a high- pressure water jet/wire brush and ensure that it is free of dust, oil, grease, grime and loose particles etc. In the existing terraces, the substrate must be checked for its soundness, damaged portions & hollow areas must be repaired with Polymer modified mortar. Small cracks 3mm or less should be open out, cleaned & filled with Staro Crack Seal & wider cracks should be filled with Polymer modified mortar. All corners and joints of drain pipes, channels etc. must be treated with polymer modified mortar prior to coating application. Ensure that the coating is applied at least 6 inch inside the drain pipe.
* Horizontal Slab area: Apply self-priming coat (diluted with water in 3:1 ratio by volume). Allow to dry for at least 3-4 hrs prior to application of subsequent coat. Apply two coats of Starogard Damp Proof without dilution to achieve forced coverage of 10 sq ft / ltr for all coats put together. For best performance on terraces, ensure that the product is applied on the entire roof including parapet wall to form a continuous blanket.
Vertical Surface* On vertical surfaces, Starogard Damp Proof is to be applied followed by top coat application in the manner detailed below:
Staroguard Damp Proof Application:* Fresh surface (Must be a cement plaster in sound condition with no debonding. Localized repairs done as per standard civil practices in case it is required). Apply a fresh coat of Staroguard Damp Proof mixed in ratio of 3:1 and applied with a spreading rate of 5.5 Sq meter/Ltr (60 sq feet/ltr). Allow to dry for 4-6 hours and then apply another coat of Staroguard Damp Proof without dilution with a spreading rate of 4.6 to 5.1 Sq meter/Ltr (50- 55 sq feet/ltr).
View Complete Details
Get Latest PriceRequest a quote
Product Details
Company Details
Product Specification
Service Location/City | Pan India |
Form Of Chemicals | Liquid |
Usage/Application | Commercial |
Service Mode | Offline |
Solids By Weight | 54-60% |
Tensile Strength | 2.82 psi |
Elongation | 220 N/cm2 |
Viscosity Sormer | 122-134 KU |
Colour | White |
Service Duration | 6-7 Days |
Appearance | Viscous Liquid |
Application Temperature | 5-35 DegreeC |
Specific Gravity | 1.25 kg/m3 |
Product Description
We are providing Staroguard Damp Proof Fibre Reinforced Elastomeric Acrylic Roof Coating to our clients.
Staroguard Damp Proof is a fiber reinforced elastomeric liquid applied water proofing membrane. It is formulated with select elastomeric and resilient acrylic polymers and reinforcing polyester fibers. Upon curing, it forms a thick, seamless, durable membrane thus offering ultimate waterproofing.
Benefits
Recommended Uses
Directions for Use Horizontal Surface
Vertical Surface
Staroguard Damp Proof Application:
Staroguard Damp Proof is a fiber reinforced elastomeric liquid applied water proofing membrane. It is formulated with select elastomeric and resilient acrylic polymers and reinforcing polyester fibers. Upon curing, it forms a thick, seamless, durable membrane thus offering ultimate waterproofing.
Benefits
- Waterproofing protection of up to 7 bars hydrostatic pressure.
- Crack-bridging - Effectively bridges cracks up to 2.5 mm
- Reinforced with glass fibers for superior abrasion resistance.
- Strong adhesion to masonry substrates.
- High sheen, brilliant white colour and thick coat results in high levels of heat reflectance.
- Reduces carbon dioxide and chloride ion diffusion thus protecting re-bars against corrosion.
- Single pack, easy to apply and simple re- coating.
- Waterproofing warranty on Terraces and vertical surfaces (please refer to warranty booklet for details)
- Provides surface temperature reduction up to 10°C
- Reinforced with fibers to improve mechanical properties and abrasion resistance.
- Excellent adhesion to substrates like concrete and masonry
- Excellent resistance to water, UV rays and ageing
- Excellent anti-fungal and anti-algal properties
- Acts as an effective barrier against carbon dioxide thus prolonging the life of the structure
Recommended Uses
- Can be used for building roofs, terraces, parapet, sunshades and exterior vertical walls. It can also be applied on existing IPS, sound brick-bat coba or cementitious waterproofing.
Directions for Use Horizontal Surface
- Prepare the surface by cleaning with a high- pressure water jet/wire brush and ensure that it is free of dust, oil, grease, grime and loose particles etc. In the existing terraces, the substrate must be checked for its soundness, damaged portions & hollow areas must be repaired with Polymer modified mortar. Small cracks 3mm or less should be open out, cleaned & filled with Staro Crack Seal & wider cracks should be filled with Polymer modified mortar. All corners and joints of drain pipes, channels etc. must be treated with polymer modified mortar prior to coating application. Ensure that the coating is applied at least 6 inch inside the drain pipe.
- Horizontal Slab area: Apply self-priming coat (diluted with water in 3:1 ratio by volume). Allow to dry for at least 3-4 hrs prior to application of subsequent coat. Apply two coats of Starogard Damp Proof without dilution to achieve forced coverage of 10 sq ft / ltr for all coats put together. For best performance on terraces, ensure that the product is applied on the entire roof including parapet wall to form a continuous blanket.
Vertical Surface
- On vertical surfaces, Starogard Damp Proof is to be applied followed by top coat application in the manner detailed below:
Staroguard Damp Proof Application:
- Fresh surface (Must be a cement plaster in sound condition with no debonding. Localized repairs done as per standard civil practices in case it is required). Apply a fresh coat of Staroguard Damp Proof mixed in ratio of 3:1 and applied with a spreading rate of 5.5 Sq meter/Ltr (60 sq feet/ltr). Allow to dry for 4-6 hours and then apply another coat of Staroguard Damp Proof without dilution with a spreading rate of 4.6 to 5.1 Sq meter/Ltr (50- 55 sq feet/ltr).
Interested in this product?Get Latest Price from the seller
Contact Seller
About the Company
Year of Establishment2006
Legal Status of FirmLimited Company (Ltd./Pvt.Ltd.)
Nature of BusinessManufacturer
Number of Employees26 To 50 People
Annual TurnoverRs. 5 - 10 Crore
IndiaMART Member SinceSept 2014
GST27AAUCS3296H1ZM
Import Export Code (IEC)03140*****
Exports to Bangladesh | Jordan
Your customers demand the best - and that's what we deliver. At “Stanrose Envirotech India Private Limited”, we understand our clients' need for the best. The challenges of a fluctuating, worldwide economy are many. Every rupee and every sale is precious. Our clients expect the best from us so they can compete in today's ever-evolving industrial marketplace. That's when “Stanrose Envirotech India Private Limited” is invaluable. When you need the best - we deliver. We also provide the services for our complete product ranges.
Seller Contact Details
Rajat Chakraborty
G-17/8, Midc, Tarapur Industrial Area Near National Pharmaceuticals, Palghar, Boisar Palghar - 401506, Thane, Maharashtra, India
Get DirectionsView Mobile No.
Send SMS
Send Email