Mild Steel Metal Gathering Machine
Body Material | Mild Steel |
Usage/Application | Industrial / Personal |
Maximum Upsetting Strok | 500 mm |
Maximum Upsetting Cylinder force | 12 Tons |
Normal Bar Length Clamped | 12 mm |
Introduction :
- Kejetherm metal gathering machine is fully hydraulically operated with resistance heater.
Principle of operation :
- Metal gathering operation consists of heating the part of the job and pushing the remaining cold material of the job into hot zone till the required metal gathering takes place.
Advantages:
* By employing metal gathering many of the well known technical limitations and disadvantages of mechanical upsetting can be overcomed
* Simultaneous heating and forming in one machine.
* Almost unlimited gather in one operation. The mechanical upsetting limitation of about 3 x dia. No longer applies. The modern engine valve has an upset length of up to 20 x dia. And lengths of upto 40 x dia. Are commonly electro-upset.
* No longitudinal flash is formed such as is unavoidable in a split-die mechanical upsettler.
* No waste of heating energy or material. Outside of the upset volume can be precisely controlled to allow subsequent, "flashless" forging in closed dies.
* Always ready for instant use, no warm up period.
* Energy efficient, about 0.35 - 0.40 kwh / kg.
* Minimal scaling because of simultaneous heating and gathering. Improved die life in subsequent forging operations.
* No environmental pollution by emission of heat, fume or exhaust gas.
* Free upsets can be finished forged without re-heating and so save time and energy.
* Consistent heating temperature through the use of thyristor control.
* Optimal grainflow and fault free surface. The unheated bar length remains unchanged
Technical information of metal gathering machine
Exports To: Bangladesh | Argentina | United Arab Emirates | Poland
Product Details
Company Details
Product Specification
Body Material | Mild Steel |
Usage/Application | Industrial / Personal |
Maximum Upsetting Strok | 500 mm |
Maximum Upsetting Cylinder force | 12 Tons |
Normal Bar Length Clamped | 12 mm |
Bar Range Optimum From To | 20-40 mm |
Heat Rating of Machine | 100 KVA |
Country of Origin | Made in India |
Product Description
Introduction :
- Kejetherm metal gathering machine is fully hydraulically operated with resistance heater.
Principle of operation :
- Metal gathering operation consists of heating the part of the job and pushing the remaining cold material of the job into hot zone till the required metal gathering takes place.
Advantages:
- By employing metal gathering many of the well known technical limitations and disadvantages of mechanical upsetting can be overcomed
- Simultaneous heating and forming in one machine.
- Almost unlimited gather in one operation. The mechanical upsetting limitation of about 3 x dia. No longer applies. The modern engine valve has an upset length of up to 20 x dia. And lengths of upto 40 x dia. Are commonly electro-upset.
- No longitudinal flash is formed such as is unavoidable in a split-die mechanical upsettler.
- No waste of heating energy or material. Outside of the upset volume can be precisely controlled to allow subsequent, "flashless" forging in closed dies.
- Always ready for instant use, no warm up period.
- Energy efficient, about 0.35 - 0.40 kwh / kg.
- Minimal scaling because of simultaneous heating and gathering. Improved die life in subsequent forging operations.
- No environmental pollution by emission of heat, fume or exhaust gas.
- Free upsets can be finished forged without re-heating and so save time and energy.
- Consistent heating temperature through the use of thyristor control.
- Optimal grainflow and fault free surface. The unheated bar length remains unchanged
Technical information of metal gathering machine
Model |
|
TMG/V-25 |
TMG/V-50 |
TMG/H-50 |
TMG/H-100 |
Heat Rating of Machine |
KVA |
25 |
50 |
100 |
|
Bar range optimum from to |
mm |
9-18 |
12-24 |
20-40 |
|
Normal Bar length clamped |
mm |
6 |
10 |
12 |
|
Maximum upsetting strok |
mm |
150 |
200 |
300 |
500 |
Maximum upsetting cylinder force |
tons |
3 |
8 |
12 |
Application :
- Typical electro-upset parts rear axle shaft
- Drive shaft or torsion bar
- Engine valve
- Pinion gear
- Tie-rod end
- Selector fork
Product Video
About the Company
Year of establishment 1982, Keje Thermoweld Equipments Pvt. Ltd. is the leading manufacturer of Resistance Welding Equipment and Resistance Heating Equipment. Our presented products are extremely well-liked for their longer life, sturdiness, durability and top performance. These products are made by experts using the advanced techniques and premium quality material, which is sourced from trustworthy merchants of market. Experts manufacture these products as per worldwide industry standards. Being a client's centric firm, our professionals also manufacture these products according our customer’s requirements and necessities.
Seller Contact Details
T-105, Bhosari, Midc, Bhosari Pune - 411026, Maharashtra, India
Get Directions