Unilift AP35.40.06.A1.V Submersible Drainage pump
Model Name/Number | Unilift AP35.40.06.A1.V |
Brand | Grundfos |
Weight | 12 kg |
Density | 998.2 kg/m3 |
Enclosure Class | IP68 |
Submersible drainage pump type
Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase totally enclosed motor in insulation class F with thermal overload protection. The pump is fitted with suction strainer and level switch for automatic start and stop.The impeller is a VORTEX impeller for 35 mm free passage suitable for pumping groundwater, surface water, rain water and similar.The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings.The pump is ready for use as it is fitted with carrying handle and is supplied with a 5 m mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.Unilift AP Basic pumps are single-stage pumps (AP35B, AP50B) with vortex impeller. All Unilift AP Basic pumps are made of stainless steel, with a composite baseplate. The Unilift AP Basic range is designed for submerged operation, either free-standing on the base plate or installed using an auto coupling. The pump inlet is designed to prevent to large particles from entering the pump. The base plate is clipped on by means of four clips hidden under the composite ring at top of the pump housing. The ring prevents dirt from sticking to the clips. All Unilift AP Basic pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an A” in the type designation are fitted with a float switch. The outlet is positioned at the side of the pump and is R 2. Applications
- Water and rainwater in horticulture
- Water from rivers and lakes
* Rainwater, drainage water and water from flooding
* Water for filling/emptying containers, ponds, tanks, etc.
* Effluents from showers, washing machines and sinks below sewer level
* Pool water
* Ditch drainage water
* Groundwater (lowering applications)
* Domestic effluents from septic and sludge-treating systems
* Liquids containing fibres from light industry, laundries, etc.
* Effluents from viaducts, underpasses, etc.
* Drainage water from garage sprinkler systems
Product Details
Company Details
Product Specification
Model Name/Number | Unilift AP35.40.06.A1.V |
Brand | Grundfos |
Weight | 12 kg |
Density | 998.2 kg/m3 |
Enclosure Class | IP68 |
Rated Current | 4A |
Mains Frequency | 50 Hz |
Rated Voltage | 1 x 230 V |
Product Description
Unilift AP35.40.06.A1.V
Submersible drainage pump type
Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase totally enclosed motor in insulation class F with thermal overload protection.
The pump is fitted with suction strainer and level switch for automatic start and stop.
The impeller is a VORTEX impeller for 35 mm free passage suitable for pumping groundwater, surface water, rain water and similar.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings.
The pump is ready for use as it is fitted with carrying handle and is supplied with a 5 m mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.
Unilift AP Basic pumps are single-stage pumps (AP35B, AP50B) with vortex impeller. All Unilift AP Basic pumps are made of stainless steel, with a composite baseplate. The Unilift AP Basic range is designed for submerged operation, either free-standing on the base plate or installed using an auto coupling. The pump inlet is designed to prevent to large particles from entering the pump. The base plate is clipped on by means of four clips hidden under the composite ring at top of the pump housing. The ring prevents dirt from sticking to the clips. All Unilift AP Basic pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an "A" in the type designation are fitted with a float switch. The outlet is positioned at the side of the pump and is R 2.
Applications
- Water and rainwater in horticulture
- Water from rivers and lakes
- Rainwater, drainage water and water from flooding
- Water for filling/emptying containers, ponds, tanks, etc.
- Effluents from showers, washing machines and sinks below sewer level
- Pool water
- Ditch drainage water
- Groundwater (lowering applications)
- Domestic effluents from septic and sludge-treating systems
- Liquids containing fibres from light industry, laundries, etc.
- Effluents from viaducts, underpasses, etc.
- Drainage water from garage sprinkler systems
Product Video
About the Company
Under the supervision of our mentor Mr. Devaraju HM the Proprietor of the firm we have successfully achieved all our targeted goals within the specified time frame. Due to his business acumen and motivation, we attained an appreciation from our clients.
Seller Contact Details
No. 2755, 15th Main, 1st Cross, E Block, Sahakara Nagar, Sahakara Nagar Bengaluru - 560092, Karnataka, India
Get Directions