Stainless Steel Segmented V Notch Ball Control Valves
Size | 5 inch |
Brand | 4Matic |
Usage/Application | Industrial |
Model Name/Number | 4MVBLV |
Connector Type | Flanged End |
1.1 Introduction to Valves A) The V-notch valve has been designed for the requirements and applications of piping. As flow rate is effectively controlled, it has less cavitation, noise, corrosion, or vibration relatively. B) The most important feature of the V-notch valve is its body that has been prepared in appropriate sizes to meet the requirements of piping. It consists of a V-ball that controls fluid, a body that includes a seat, and an actuator to adjust the valve trim. C) The V-notch valve is designed for easy maintenance.
D) The V-notch valve trim boasts a long life span and has few faults. To use the valve to its full life span, you should install it correctly according to the manual and maintain it according to the prescribed procedures while using it.
1.2 Valve Structure A) There are largely two types of V-notch valve: soft seat and metal seat
1.3 Features of Valve A) As the V-notch valve has a V shape ball structure, it can be used for both control and on/off functions.
2. Storage A) Do not throw, drop, trip or drag V-notch valves when transporting it. B) Keep all parts of the V-notch valve in a well-ventilated place protected from fire, rain and wind. Store the valve at a temperature between - 29°C (-20°F) and 48°C (120°F). The storage area must be protected from flooding. C) Operate the elastomer (O-ring type) of pneumatic actuator at least once every six months to prevent their functional degeneration. Operate it to the full stroke even under general operation conditions at least three times a month.
D) Do not remove the flange cap attached to the flange surface to prevent foreign substances from penetrating into the system until valves are installed on the line. 3. Installation Like any other valves, the V-notch valve must be installed carefully at first according to the following cautions to use it for many years without malfunction. A) Remove the flange cap and check whether there are any foreign substances in the body. If you find foreign substances, remove them before starting installation. B) As cast steel products are processed with rust preventive oil before shipping to prevent corrosion, remove the rust preventive oil from the pipes before installing them on the line. C) Blow off all foreign substances including welding chips in the pipes before starting installation.
E) When assembling the flange-type valve, you should use a specified gasket, and install it in parallel with the other flange. Also, you are recommended to fasten the bolts in several parts in a balanced manner sequentially in diagonal direction.
) Install the valve at right angle to the ground as much as possible. If this is impossible, attach a support to the valve before installing it. (See Fig 3.2 and 3.3) CAUTIONS Avoid horizontal piping if possible because it may adversely affect the function and performance of valves during operation. When moving V-notch valves, you should handle them carefully so that the components and air piping will not be damaged. Otherwise, the electronic and electric parts such as solenoid valve, positioner, and limit switch may get damaged or the valve track may change. Be careful not to damage the surface of valve flange sealing. Apply thermal insulation as needed, but do not apply thermal insulation to the cooling fin and extensions.
Exports To: Saudi Arabia | Nepal | United Arab Emirates | Zambia | Kenya
Product Details
Company Details
Product Specification
Size | 5 inch |
Brand | 4Matic |
Usage/Application | Industrial |
Model Name/Number | 4MVBLV |
Connector Type | Flanged End |
Pressure | High Pressure |
Media | Air |
Material | Stainless Steel |
Branded (Y/N) | Yes |
Temperature of Media | High Temperature |
WOG Rating | 150 |
Packaging Type | Wooden Box |
Fire Safe | Yes |
Country of Origin | Made in India |
Product Description
1.1 Introduction to Valves A) The V-notch valve has been designed for the requirements and applications of piping. As flow rate is effectively controlled, it has less cavitation, noise, corrosion, or vibration relatively. B) The most important feature of the V-notch valve is its body that has been prepared in appropriate sizes to meet the requirements of piping. It consists of a V-ball that controls fluid, a body that includes a seat, and an actuator to adjust the valve trim. C) The V-notch valve is designed for easy maintenance.
D) The V-notch valve trim boasts a long life span and has few faults. To use the valve to its full life span, you should install it correctly according to the manual and maintain it according to the prescribed procedures while using it.
1.2 Valve Structure A) There are largely two types of V-notch valve: soft seat and metal seat
1.3 Features of Valve A) As the V-notch valve has a V shape ball structure, it can be used for both control and on/off functions.
2. Storage A) Do not throw, drop, trip or drag V-notch valves when transporting it. B) Keep all parts of the V-notch valve in a well-ventilated place protected from fire, rain and wind. Store the valve at a temperature between - 29°C (-20°F) and 48°C (120°F). The storage area must be protected from flooding. C) Operate the elastomer (O-ring type) of pneumatic actuator at least once every six months to prevent their functional degeneration. Operate it to the full stroke even under general operation conditions at least three times a month.
D) Do not remove the flange cap attached to the flange surface to prevent foreign substances from penetrating into the system until valves are installed on the line. 3. Installation Like any other valves, the V-notch valve must be installed carefully at first according to the following cautions to use it for many years without malfunction. A) Remove the flange cap and check whether there are any foreign substances in the body. If you find foreign substances, remove them before starting installation. B) As cast steel products are processed with rust preventive oil before shipping to prevent corrosion, remove the rust preventive oil from the pipes before installing them on the line. C) Blow off all foreign substances including welding chips in the pipes before starting installation.
E) When assembling the flange-type valve, you should use a specified gasket, and install it in parallel with the other flange. Also, you are recommended to fasten the bolts in several parts in a balanced manner sequentially in diagonal direction.
) Install the valve at right angle to the ground as much as possible. If this is impossible, attach a support to the valve before installing it. (See Fig 3.2 and 3.3) CAUTIONS Avoid horizontal piping if possible because it may adversely affect the function and performance of valves during operation. When moving V-notch valves, you should handle them carefully so that the components and air piping will not be damaged. Otherwise, the electronic and electric parts such as solenoid valve, positioner, and limit switch may get damaged or the valve track may change. Be careful not to damage the surface of valve flange sealing. Apply thermal insulation as needed, but do not apply thermal insulation to the cooling fin and extensions.
Product Video
About the Company
A blend of young energy and hands-on experience has helped 4Matic Valves in creating products of superior quality and value. 4Matic aims to provide personalized customer service and on-time delivery. Our objective is to offer engineered products which will provide our clients with the optimum solutions, whilst minimizing life cycle costs and better value. This is achieved by ensuring a thorough understanding of the Client's requirements and utilizing our vast experience of past supply and installations.
Building from the success of our range of resilient seated valves led to the introduction of our range of PTFE seated butterfly valves, also with a size range of 1" to 24". Our butterfly valves quickly gained a reputation of a valve product that solved problems. 4Matic then designed the metal seated butterfly valve for high temperature applications. The year of 2009 was another year of expansion with the addition of a full and complete line of pneumatic and electric automation products. 4Mactic also offer a range of butterfly valves for the commercial HVAC market. This continuing full load on our research and design team did not let up. The process was started to design a high performance butterfly valves and triple offset butterfly valves for critical applications in the Oil and Gas industry.
4Matic is valve manufacturer and exporter quality valves for a wide spectrum of users in the Process & Chemical, Refineries & Petrochemicals, Fertilizers, Drugs & Pharmaceuticals, Thermal Power Stations, Nuclear & Atomic Power Stations, Textiles, Dyes & Intermediates, Paints & Varnishes, Sugar, Breweries & Distilleries, Soaps & Detergents, Steel Plants, Food & Oil Industry, Solvent Extraction Plants, Sewage, Effluent & Water Treatment, Cooling Water, Ship Yards and Marine Management, Water Works, Pulp & Paper, LPG Bottling Plants, Onshore & Offshore platforms, Slurry & Ash handling.
Seller Contact Details
Plot No. 174, Shiv Shakti Estate, Near Prince Hotel, Narolgam Ahmedabad - 382405, Gujarat, India
Get Directions