Paper Vertical Door VM - 20 Metal Door Skin, Matte

Direction to use
- Before use laminates ensure that the surface of Plywood and Laminate is Clean
- The Adhesive should always be stirred before use. Sufficient Adhesive should be applied to both surfaces to bond.
* Once the Adhesive applied is tacky in nature (usually require 5-10 mints)
* When laminates are pasted vertically maintain uniform pressure on all sides till adhesive is dried
* To avoid stress cracking, avoid making cut outs having sharp and rough edges
* A gap of minimum 2mm should be maintained between two laminates while
* Door Skins are recommended for indoor use and are advised not exposed to direct Sunlight
Care and Maintainance
Clean with soft moist Cloth and Warm Solution, Dont Use Detergents Containing Adhesive Particles or Excess Soda
Direction to use
* Before use laminates ensure that the surface of Plywood and Laminate is Clean
* The Adhesive should always be stirred before use. Sufficient Adhesive should be applied to both surfaces to bond.
* Once the Adhesive applied is tacky in nature (usually require 5-10 mints)
* When laminates are pasted vertically maintain uniform pressure on all sides till adhesive is dried
* To avoid stress cracking, avoid making cut outs having sharp and rough edges
* A gap of minimum 2mm should be maintained between two laminates while
* Door Skins are recommended for indoor use and are advised not exposed to direct Sunlight
Care and Maintainance
Clean with soft moist Cloth and Warm Solution, Dont Use Detergents Containing Adhesive Particles or Excess Soda