Vertically Strip Covering Machine - Double OR Triple Covering - is specially designed and rigidly constructed machine which will run without any vibration and is suitable to lap maximum 3 layers of Paper evenly, closely and consciously round the conductor as per IS/BS specification. The lapping percentage i.e, over lap, butt lap and any percentage as per the customer specification can be obtained on this machine perfectly.
1) CAPACITY :- 3 TO 5 mm Wire & 1 X 4 mm Strip.
3 X 5 mm Strip max. ( 25 TO 30 sq mm max )
2) NUMBER OF COVERING :- 2 OR 3 Covering max. in single pass.
3) NUMBER OF SPINNER :- 2 OR 3 Spinners as per requirement .
4) SPINNER R.P.M :- Upto 1000-1200 rpm.
5) PAY-OFF :- The pay-off system is of roll-in-type with brake arrangement.
6) STRAIGHTENER UNIT :-The Straightener rolls serves to feed the wire /strip to the spinner set at a perfect angle.
7) SPINNER OUT FIT :- The spinner out-fit is made out of the steel plates. The spinner heads will be perfectly balanced and run dead true. The lapping head will be of `V’ belt driven.
8) ROTATION OF SPINNER :- Two Spinners will rotate in same direction and third one in opposite direction.
9) LAY CHANGE GEARS :- Three sets of lay change gears will be supplied along with the machine.
10) CAPSTAN GEAR BOX & CAPSTAN PULLING :- A capstan gear box with a capstan wheel will be provided .
11) TAKE-UP UNIT - This take-up is suitable for 20” bobbin . A Traverse unit will be provided.
12) GENERAL - The main frame of the machine is fabricated with thick steel flat, Channels and plates to ensure vibration
less and smooth running.