Voice Recording Playback Module
Current | 500mA |
Operating Voltage | 5V DC on White RMZ Connector or 7 to 12V AC/DC on Power Supply Connector. |
Audio Format | Playback and Recording Switch |
Recording Time | 680 SEC |
Country of Origin | Made in India |
- Operating Voltage Range: 3V ~ 6.5V
- Single Chip Solution with Minimum External Components.
* Easy Use without Development Systems Required
* 340 ~ 680 sec. Voice Recording Length
* Powerful 16-Bits Digital Audio Processor.
* Nonvolatile Flash Memory Technology without Battery Backup Required
* External Reset pin.
* Powerful Power Management Unit
* Very Low Standby Current: 1uA
* Low Power-Down Current: 15uA
* Supports Power-Down Mode for Power Saving
* Built-in Audio-Recording Microphone Amplifier
* Configurable analog interface
* Differential-ended MIC pre-amp for Low Noise
* High Quality Line Receiver
* High Quality 16 bits Audio Output Resolution
Working and Application Instructions: Interface the speaker pins and power on the module, slide the switch towards the recording option, then press and hold the M1 button and speak near the microphone then release the button M1. To playback the recorder message, slide the switch towards playback and then just click the M1 button, the recorder message will be played.
Repeat the same procedure to record the different messages on the different channels from M1 to M8 To interface with Arduino, 8051, PiC and any of the other microcontrollers, Solder the Berg header and interface it to the port pins directly, and send active low signal to active the button, the low signal period width depends on the time duration of the message to be recorded and single low pulse to playback.
Sumit Electronics & Electricals
Product Details
Company Details
Product Specification
Current | 500mA |
Operating Voltage | 5V DC on White RMZ Connector or 7 to 12V AC/DC on Power Supply Connector. |
Audio Format | Playback and Recording Switch |
Recording Time | 680 SEC |
Country of Origin | Made in India |
Product Description
- Operating Voltage Range: 3V ~ 6.5V
- Single Chip Solution with Minimum External Components.
- Easy Use without Development Systems Required
- 340 ~ 680 sec. Voice Recording Length
- Powerful 16-Bits Digital Audio Processor.
- Nonvolatile Flash Memory Technology without Battery Backup Required
- External Reset pin.
- Powerful Power Management Unit
- Very Low Standby Current: 1uA
- Low Power-Down Current: 15uA
- Supports Power-Down Mode for Power Saving
- Built-in Audio-Recording Microphone Amplifier
- Configurable analog interface
- Differential-ended MIC pre-amp for Low Noise
- High Quality Line Receiver
- High Quality 16 bits Audio Output Resolution
Working and Application Instructions:
Interface the speaker pins and power on the module, slide the switch towards the recording option, then press and hold the M1 button and speak near the microphone then release the button M1. To playback the recorder message, slide the switch towards playback and then just click the M1 button, the recorder message will be played.
Repeat the same procedure to record the different messages on the different channels from M1 to M8
To interface with Arduino, 8051, PiC and any of the other microcontrollers, Solder the Berg header and interface it to the port pins directly, and send active low signal to active the button, the low signal period width depends on the time duration of the message to be recorded and single low pulse to playback.
About the Company
Established in the year 1999, Sumit Electronics is emerged amongst the reckoned Wholesale Trader of Electronic Components, Measuring Instruments and much more. The complete provided range is strictly examined by our quality experts to ensure the delivery of fault free range at clients' end. Moreover, these products can be availed at most competitive rates.
Seller Contact Details
D. No. 28-9-69, Suryabagh, Main Road, Near Kalyani Press, Ram Nagar Visakhapatnam - 530020, Andhra Pradesh, India
Get Directions