Maximum Inaccuracy 1% of reading between 100% to 10% of calibrated flow range
0.015 % per deg C
Material of Housing
Al Die Cast
3 1/2 digit, 0.5" LCD calibrated in % or engineering units
10.00 m/s FS
Integral / Remote Mounting
0-50 deg C
0.2% of reading
Better than 0.5% of reading
Micro-volt Signal proportional to flow rate from primary Flow sensor .
Flow Velocity Range
0.1 m/s to 10 m/s
Min Media Conductivity
Greater than 5 S/cm
Riding on unfathomable volumes of industrial expertise, we are engaged in offering a broad assortment of Wafer Type Electromagnetic Flowmeter.
Principle of Operation:
The JAL-OAGH series of electromagnetic flow meters work on FARADAY''S LAW OF ELECTROMAGNETIC INDUCTION. When a conductor moves within a magnetic field, voltage is induced in it which is proportional to the velocity of the conductor.
In this case the conductor is flowing media. The equation is as below: E=B.v.D
E = Induced voltage [proportional to velocity]
B = Magnetic flux density ??? v = Mean velocity of the media
d = distance between the sensing electrodes
For a given size of flow tube & compatible amplifier the flux density ''B'' is constant, the distance between the electrodes is constant.
Effluent Treatment: Untreated as well as Treated Effluent Water Measurement.
Sewage Treatment: Waste water measurement, Sludge measurement etc.
Water Supply Schemes :Raw water as well as treated water measurement.
Boiler Feed Water Measurement.
Chemical Industries: Measurement of acidic & alkaline chemicals & slurries
Know your water consumption not just by assumption but by correct instrumentation.
Jal-oagh provides the solution.
We have introduced a new economical series of EMF, considering water as the most important utility in any industry.
Jal-Oagh 100, 300 Series Of EMF:
These flow meters are dedicated for waste water management system, sewage & effluent water measurement. These flow meters are mainly categorized into two i.e. Threaded & Wafer type. Threaded is available from DN 25 to DN 65 i.e. Jal-oagh 100 Series while Wafer is available from DN 50 to DN 200 i.e. Jal-oagh 300 Series.
Most suitable full-bore electromagnetic flow meters for water and wastewater treatment plants.
Economically Priced, Wafer Style Meter.
Available from DN50 to DN200.
Small in size and light in weight compared to other meters in its class.
Suitable for Raw water; Waste water; Sewage Water; Effluent water.
Available with Ebonite Hard Rubber as well as PTFE Liners
Interested in this product?Get Latest Price from the seller