1 year from the date of manufacturing, for unopened cans, stored in dry condition
Weber crete is an acrylic emulsion used as Waterproof and damproof coating in the form of cement slurry.
It can be used as a multipurpose additive for enhancing the performance of concrete/mortar mix.
It can be used for internal as well as external applications
Non toxic, suitable for use in potable water.
It improves the workability of mixes.
It makes the structure impermeable to liquids.
It provides an excellent bond to the existing substrate
No protection screed is required for this waterproofing system
Areas Of Application:
Waterproofing of all concrete structures like terraces, external facades, swimming pools or any other exposed area.
It can also be used for internal waterproofing like basement, lift pits, bathrooms etc.
Repairs of spalled columns, beams and any other concrete structure for internal as well as external surfaces.
It can also be used for bonding of plasters to the existing substrate for external applications.
It is used for injection into concrete/rock structures in the form of cement slurry.
Directions For Use Surface Preparation:
Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.
Surface to be treated with subsequent polymer mortar should be saturated with water
As A Slurry Bond Coat:
Surface must be thoroughly dampened before the application and excess water to be removed.
Weber crete is a ready to use liquid which is directly mixed with cement as per the proportions given in the recommendation chart to form slurry.
Apply one coat of the slurry using a stiff brush, working it well into the surface.
Place the new concrete while the bond coat is a little tacky.
As a Slurry Waterproof Coating:
Surface must be thoroughly dampened prior to application and excess water must be removed.
Take required quantity of weber crete and add cement slowly While stirring and mix thoroughly. Apply the first coat of slurry Using a brush and apply the second coat in the direction perpendicular to the previous coat. Apply the second coat while the first coat is slightly tacky, approximately after 2 hours.
As A Modified Concrete Repair Mortar:
Expose the spalled concrete upto the reinforcement bars. Corroded reinforcement bars should be exposed around their full circumference. It should then be cleaned to remove all the loose particles and is required to be treated with an anti corrosive product.
Apply weber crete as a bonding agent between the existing and new repair mortar as recommended above.
Mix weber crete and water thoroughly in one bucket and mix sand and cement in another bucket as per the proportions given in the recommendation chart. Then add the liquid mix to the mortar mix and ensure thorough mixing to form slurry. As the bond coat is slightly tacky, apply the slurry mix and build up the entire cross section to be repaired
Year of Establishment1997
Legal Status of FirmPublic Ltd. Co. Registered under Indian Companies Act 2013
Nature of BusinessManufacturer
Number of Employees101 to 500 People
Annual TurnoverRs. 50 - 100 Crore
IndiaMART Member SinceJun 2012
Established in the year 1997 we, Saint-gobain India Pvt.ltd. (weber Business) is part of the Saint-Gobain Group and is the No. 1 Manufacturer of tile adhesives and tile joint fillers in the world. With a turnover of 2.4 billion Euros in 2011, Weber has 180 cutting-edge production units in 48 countries. In India, Saint-Gobain Weber combines this global expertise with deep local knowledge to provide solutions in tile and stone fixing, joint fillers (or grouts), epoxies, masonry mortars, water-proofing chemicals, wall leveling plasters and admixtures. Our products are ready to mix and self-curing which contribute to Saint-Gobain policy of sustainable habitat. We have manufacturing facilities at two strategic locations, which enables us to provide a highly responsive and quick service to our customers, reducing our carbon footprint. We also provide on-job site training to contractors and applicators to educating them on the most modern techniques of construction. Our state-of-the-art plant in Wada is equipped with world-class R & D facilities to produce innovative technologies specifically created for the Indian environment. With a wide distribution of distributors and retailers, our products reach over 50 towns in India.