FEATURES :

• Digital Height Gauges
• Zero-setting at any position
• Mm/inch conversion
• Presetting
• Carbide-tipped scriber facilitates fine scribing on workpieces
• Can easily measure height of small workpieces
• Clear LCD screen
• The robust construction with a thick column provides highly repeatable measurement
• Fine-adjustment carriage to feed the slider finely

Features

• Zero setting at any position
• Switch between mm and inches with the push of a button and at any position
• Battery:One 3V
• Large LCD display
• Durable stainless steel construction
• With locking thumb screw which locks the jaws in place
• Resolution : 0.01mm

Specification:

Accessories:

FEATURES
Obtaining A Diameter Of A Groove Deep
Inside A Hole Through Longer Probes
Power On/Off
Instant Mm/Inch Conversion
Zero-Setting At Any Position
The Black Cover Is Made Of Plastic And The Metal Part Is Made Of Stainless Steel.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Applications :

The Pencil Hardness Tester Applies Mechanical Measurement. Keep Three Point Touch The Coating (Two Wheel, A Pencil Core)

and a 45 degree Angle Between Pencil And Test Surface. Push Theinstrument Sliding,Pencil Draws The Corresponding Track In The Coating.

In The Change Of Different Pencil Marks, The Hardness Value Of The Film Can Be Determined.

Coating Hardness Is The Necessary Measurement For The Performance Of Coatings. This Instrument Applied The Pencil Scratch Method.

It Is A Fast And Economical Way To Determine The Film Hardness Using The Drawing Lead Core Or The Pencil Core.

Standard Accessories :

1). Pencils : 6B - 6H

2). 1* Pencil hardness meter

3). 1* Horizontal Pad Block

4). 1* Eraser

5). 1* ABS Carry Case

6). 1* User manual

FEATURES

* Measuring The Inside Width & Position Of Groove

* Power On/Off

* Instant Mm/Inch Conversion

* Zero-Setting At Any Position

Colorimeter WR10 8mm

Hand-held Colorimeter WR10 is iWAVE years of painstaking development of the high-precision colorimeter, serially developed according to the measuring requirements on different products and gain many optimal achievements with high cost performance.
The most convenient colorimeter: automatic correction when starting up (national patent)
Environmental, low energy consumption instrument, high capacity lithium battery
Comfortable observation with real color screen display 
Exquisite and delicate

Details

Colorimeter WR18 (4mm,8mm,40mm)

WR-18 includes 3 switchable calibers (4mm/8mm/40mm) this version is a specially designed, high performance precision colorimeter, caliber 4mm can apply on small area, cambered and other special surface, caliber 8mm is a universal type for many field, also caliber 16mm can be used for huge, texture and pitting surface. It can bring great convenience for the user in the color quality detection on all kinds of measuring material.

Details

• Ultrasonic thickness gauge is an intelligent handhold product, which adopts ultrasonic measuring principle, and is controlled by micro processor, provides quick and precise measurement of thickness for most of industrial material
• This unit is widely used in various precise measurement for different hard ware/parts 
• one of its important application is to monitor the level of thickness- decreasing during operation of various and pressure container
• Usely applied in manufacture fields, metal processing, and commercial inspection 
• This instrument can be used for any material that conducts and reflects constant sonic velocity
• This unit is suitable for measuring materials that are good ultrasonic conductor such as metal, plastic, ceramic, glass etc.
• Along as the measured part in two parallel surfaces for measurement of thickness
• This unit is not suitable for cast iron due to its big crystalloid composition
• Low battery indication
• Auto Power Off
• Backlit LCD Display

• Display:4-digital LCD display 
• Minimum display unit:0.1mm 
• Working frequency:5MHz/2.5MHz
• Measuring range:1.2 to 220mm(steel)
• Minimum  limit  for  tube  measuring:20*3mm(steel)
• Accuracy:+/-(1%H+0.1)mm,H denotes the measured thickness. 
• Sound velocity range:1000 to 9999 m/s
• Packed in Hard Carrying Case

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Description

This Digital protractor uses angle sensor technology
to calculate exact angles simply by tilting it to
the desired angle. The LCD provides reading that
is always displayed in upright position in any angle.
It also has Absolute Angle Measurement to test whether
the working surface is on the level to check roof slopes,
wheel alignment, etc. With simple self calibration no
other fixtures is needed.

Specifications:

Measuring Range : 4 x 90° , mm/m : 1000mm/m,% : 100%, in/ft : 12in/ft
Accuracy : 0° and 90° : ±0.05°, the rest : ±0.15°
Resolution : 0.05°
Working Temperature : 32 ~ 122°F (0 ~ 50°C)
Working Humidity : =85%
Protection Grade : IP65
Dimensions : approx. 151 x 60 x 32mm
Weight : approx. 292g
Power Supply : 2 x AAAbattery

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Delivery Time: READY STOCK

Three-point internal micrometers for quick and accurate measurement of internal dimensions, within a large measuring range.

With Ratchet Stop & Tungsten carbide measuring faces.

Available Range :
1. 6 - 12mm
2. 12 - 20mm
3. 20 - 40mm
4. 40 - 100mm

Graduation:
0.001 mm (0 3.5- 12 mm),
0.005 mm (12 - 100 mm).

Scope Of Delivery : Standard Ring & Carry Case.

Additional Information:

• Delivery Time: READY STOCK

Thickness Gauges Offer a Quick & Efficient Means Of Inspection With Their Convenient Grip Handle.
Ideally Suited For Measuring Thickness Of Paper, Films, Wire, Sheet Metal, Plastic Bags, Leather etc.

Range : 0 - 10mm (0.01mm Resolution)
0 - 10 mm(0.001mm Resolution)

Display Type:Digital

Brand:Kency

Least Count: 0.01