• Material: Steel
• Color: Black
• Product Dimension (L x B x H): 30 cm x 15 cm x 10 cm
• Range : 0 - 50mm
• Arm Length : 230mm
• Graduation : 0.1mm

Applications:

Push And Pull Load Test, Pluggable Force Test, Destructive Test, Penetration Test And So On.

Characteristics:

1. Digital Display, Easy Reading.

2. In Light Weight, Small Size, Easy To Carry.

3. Unit Display: Lb, Kg, N

4. The Battery Has Over-Load Protection In Case Of Short Circuit. It Adopts The 3.7V Lithium Battery And Auto Shut Off With No Operation In 10 Minutes.

Specifications:

Precision Ground 90 º V-Way On Top And Bottom For Holding Round Or Irregular * Shapes For Scribing ,Grindin,Measuring Or Machining"

* Powerful Magnetic Force With Clamping Power Of Above 75 kgs.

* Easy "ON/OFF" Switch

* Available In Single (S) Or Matched Pair (MP)

Coatmeasure
Measures Coating Thickness.
For Non-Magnetic Coatings On Magnetic Base.
Ideal For Coatings On MS.

Statistics
(Number Of Readings, Average, Std.Deviation, Max & Min) Are Updated With Every & Displayed Simultaneously. It Helps To Decide How Many Readings Are To Be Taken. Continue Taking Readings Till You Start Getting Reasonably Consistent Statistics.

Interchangeable Probe Sleeve Tip (A) Having 3 Points For Flat & Spherical Surfaces.
Interchangeable Probe Sleeve Tip (B) Having V-Block For Cylindrical Surfaces."
Supplied With Wooden Carry Case, Test Foils, Test Base & Battery."

Technical Specifications

FEATURES

Ideal For Ring Grooves Applications In Oil, Gas & Petrochemical Industry!

The Most Economical& Easy Way To Check API Ring Grooves

Unique Measuring Instrument

Designed Specifically For Oilfield Industry.

The Series Of API Ring Groove Checker Inspect All Types Of API Ring Seal Groove I.E RTJ’s Groove.

It Is A Modified Form Of Vernier Caliper.

It Can Be Used To Check, OD, ID And Pitch Diameter Of API Ring Seal Grooves.

Range : 0-300mm
Resolution : 0.01mm

A magnetic stand to be used on steel or iron surfaces. The permanent magnet is set into a switch adjustable base for convenient surface mounting. The mechanical arm can be adjusted and locked into position by using the knob on the upright. This stand is idea for holding indicators or dial test indicators during alignment and testing operations.

• For Digital / Dial Indicators and Dial Test Indicators
• Magnetic Force : 80 Kgf

• 8-grain species: Paddy, wheat, barley, forage, corn, rapeseed, soybean, rice
• Grain moisture test
• Food temperature test
• Set standard for grain moisture content and give warning on over-standard grain moisture
• Temperature auto-compensation function
• Moisture standard setup
• Overflow alert
• Backlight control function
• Microcomputer technology(CPU)
• Selectable °C/°F
• Battery hold function
• Data hold function
• Auto power-off and Low battery indication

• Measuring range: Moisture 5%~30%, Temperature -10~60°C (14~140°F)
• Maximum error: Moisture ±(1% RH+0.5), Temperature ±2.5°C (± 5°F)
• Resolution: 0.5% moisture, temperature 0.1°C/°F
• Operating environment: temperature 0~40°C / Humidity 0~85% RH
• Auto power off function: 5 minutes without any operation automatic shutdown
• Material: ABS, TPU
• Size: 72 x 35 x 145mm (main unit) ; 415 x 36 x 36mm (probe)
• Cable Length: 1m
• Weight: 190.6g (main unit) ; 208.3g (probe)
• Power Supply: 3 x 1.5V AAA battery

• 1 x Grain Moisture Meter
• 1 x Test Probe
• 3 x AAA Battery
• User Manual

Flow viscosity cup (Ford Cup ) is a simple significance device that permits the timed flow of a known level of liquid passing through an orifice located at the bottom. The conditions in a simple flow cup are rarely ideal for making true measurements of viscosity. It is important when using a Ford Cup and when retesting liquids that the temperature of the cup and the liquid is maintained, as ambient temperature makes a significant difference toviscosity and thus flow rate.

Flow cups made from brass having S.S. Orifice for measuring viscosity with stand.

Additional Information:

• Delivery Time: READY STOCK

This Ultrasonic Thickness Gauge is an intelligent handhold product, which adopts ultrasonic measuring principle, and is controlled by micro processor, provides quick and precise measurement of thickness for most of industrial material.

The tool has wide measurement range from 1.20 ~ 225.00 mm (0.047 ~ 8.86 inch) with accurate measurements. Moreover, the meter has ultrasonic wave velocity measurement function from 1000 m/s to 9999 m/s.

This unit is widely used in various precise measurements for different hardware / parts in industrial realm. One of its important applications is to monitor the level of thickness decreasing during operation of various and pressure container.

It is diffusely applied in manufacture fields, metal processing and commercial inspection. This product can be applied for the material that conduct and reflect constant sonic velocity.

SPECIFICATIONS :

· LCD Digital display: 4 digits

· Minimum display unit: 0.1mm

· Working frequency: 5MHz

· Measurement Range: 1.2-225.0mm (Steel)

· Minimum limit for Tubes measurement: 20 x 3mm (Steel)

· Accuracy: ± (1% H 0.1 mm) (H denotes the measured thickness)

· Sound Velocity Range: 1000-9999m/s

· Measuring Sound Velocity with a given thickness

· Measuring Range: 1000-9999m/s

· When the given thickness over 20mm, the accuracy is ±1%; when the given thickness less than 20mm, the accuracy is ±5%

· Operating Temperature: 0-40°C (32-104°F)

· Power supply: 3 x 1.5 AAA Alkaline Batteries (not Included)

· Operation Current:

· Normal Operation Current =<50mA

· With Backlight turn on current =<120mA

· Stand-by Current:=<20 μA

· Size: approx. 72 x 146 x 29mm (2.83 x 5.75 x 1.14inch)

Made Of High Quality Granite Stone, Is Ideally Used To Radial Check-Out And Axial Run-Out Of Cylindrical Shafts In Automotive Workshops And Scientific Research Centers. We Offer This Stand In Various Models, Dimensions And Specifications. 

Granite Comparator Stand, We Offer Is Highly Accredited For The Below Enlisted Attributes:

·         High Degree Of Accuracy

·         Level Adjustable Stable Base

·         High Thermal Stability

·         Corrosion Resistance

Specifications

Digital Wood Moisture Meter that can measure moisture in up to 150 different kinds of wood

Description

·          Specially Designed for Timber Market

·         Has Eight Calibrating Scales

·         Accurate Measurement in 150 wood species

·         Can be used with integral pin electrodes or using the heavy duty moisture probe

·         Automatic temperature compensation

·         Range: 6% to 100%

·         Resolution: 0.1

·         Accuracy: ±1%

·         Temperature Measuring Range: -35°C~80°C

·         Accuracy: ±2°C

Granite Surface Platees are preferred for the inspection and layout making purposes. These surface plates make an ideal base for mounting sophisticated mechanical, electronic and optical gauging systems

We provide fabricated stand with adjustable leveling screws on request by our clients. The overall working height of surface plates with stand and leveling screw will be 900 MM (approx) from floor level.

Additional Information:

• Delivery Time: READY STOCK

Colorimeter WR10 8mm

Hand-held Colorimeter WR10 is iWAVE years of painstaking development of the high-precision colorimeter, serially developed according to the measuring requirements on different products and gain many optimal achievements with high cost performance.
The most convenient colorimeter: automatic correction when starting up (national patent)
Environmental, low energy consumption instrument, high capacity lithium battery
Comfortable observation with real color screen display 
Exquisite and delicate

Details

• Measuring Ranges: 35 to 130 dB;
• Resolution: 0.1 dB;
• Accuracy (23 ± 5°C):
• Frequency weighting meet IEC 651 type 2, calibrating input signal on 94 dB (31.5 Hz to 8 kHz)
• Display: 18 mm LCD, 3 1/2 digits;
• Frequency: 31.5 Hz to 8,000 Hz
• Operating Temp: 0°C to 50°C; Operating Humidity: max. 90% RH;
• Range selector: 30 to 80 dB, 50 to 100 dB, 80 to 130 dB, 50 dB on each step, with over & under range indicating
• Output signal: AC output - AC 0.5 Vrms corresponding to each range step, D
• C output - DC 0.3 to 1.3VDC; 10 mV per dB, Output impedance: 600 Ohm
• Power supply: DC 9V battery

1.Webster Hardness Tester Is A Portable Instrument Which Can Perform On-Site Hardness Testing On Soft Materials.By A Quick And Easy Test,The Hardness Value Can Be Read Out Directly With A Simple Clamp,In Accordance With American Standard ASTM B647

2.Used To Check The Result Of Hest Treament And Determine If The Mechanical Performance Of The Workpiece Is Acceptable

3.A Test Can Be Completed By One Press.

4.Model W-20 Equivalent To US Model B Tester

5.Very Fast, Very Simple And Very Portable,Small Indentation.

6.Suitable For Testing The Hardness Of Aluminium Profiles, Tubings,Sheets And Other Shapes

7.Used For Testing The With Long Or Heavy Workpieces Or Assemblies Inconvenient To Be Sent To The Labs.

8.Used To Check The Result Of Heat Treatment And Determine If The Mechanical Performace Of The Workpiece Is Acceptable.

9.The Webster Hardness Value Can Be Converted Into The Common-Used Vickers,Rockwell And Brinell Hardness Value.

10.Different Models Available For Testing Aluminum Alloys, Brass,Copper Alloy And Copper.

Application :

1.Used To Ascertain If The Work Piece Has Been Heat-Treated And Check The Effect Of Heat Treatment.

2.Used To Ascertain If The Work Piece Is Made And Processed By Improper Alloys.

3.Used For Testing The Work Pieces With Overlength, Overweight Or Assemblies.

4.Used For Production Inspection,Acceptance Inspection And Quality Monitoring And Inspection.

Models :

· W-20 For Aluminum Alloy, Range Is 25-110HRE, Specimen Size/mm : Thickness 0.4-6 ; Inner Diameter10

· W-20A For Aluminum Alloy, Range Is 25-110HRE, Specimen Size/mm : Thickness 0.4-13 ; Inner Diameter10

· W-20B For Aluminum Alloy, Range Is 25-110HRE, Specimen Size/mm : Thickness 0.4-8 ; Inner Diameter6

Colorimeter WR18 (4mm,8mm,40mm)

WR-18 includes 3 switchable calibers (4mm/8mm/40mm) this version is a specially designed, high performance precision colorimeter, caliber 4mm can apply on small area, cambered and other special surface, caliber 8mm is a universal type for many field, also caliber 16mm can be used for huge, texture and pitting surface. It can bring great convenience for the user in the color quality detection on all kinds of measuring material.

Details

Boring Head

Application :

Boring head helps in is the process of enlarging a hole that has already been drilled (or cast), by means of a single-point cutting tool . Boring head is used to achieve greater accuracy of the diameter of a hole.

Technical Details :

Robust Construction to withstand stresses

Least Count : 0.02mm (Standard Model)

Least Count : 0.01mm (High Accuracy Model)

With Extra Boring Tools

Range : 20-80mm , 50-150

Shank : R 8( M1TR), ISO 40, ISO 30, BT 40