Model Name/Number	PIPE THICKNESS GAGE
Display Type	Digital

Peak Digital Thickness Caliper

Push Jaws Into Contact With Object Surface To Quickly, Easily And Accurately Measure Thickness. Press A Button To Display Decimal Inches, Fractional Inches Or Millimeters On Large LCD.

Suitable For Measuring Thickness Of , Pipes, Tubes,

Metals & Many Other Applications.

Range : 0 - 25mm

Resolution : 0.01mm

Accuracy : +/- 0.05mm

Auto Power Off

Inch / mm Conversion.

Usage/Application	Industrial
Brand	KENCY,INSIZE
Model Name/Number	ANGLE FINDER
Display Type	DIGITAL
Range	300MM
Scale Length	300MM

Digital Angle Finder

Measuring Range : 0-360 degrees
Resolution : 0.05 degree
Accuracy : 0.1 degree
Arm Length : 200mm
LCD Display : 12mm character height
Battery : 3V CR2032

An innovative angle finder with large digital LCD display. Useful for measuring, marking, and setting angles.

• Absolute and relative measurement display
• Easy calibration and zero setting.
• Lock the blade at any angle through 360 degrees
• Level bubble located on the top.
• Aluminum body and stainless steel arm.

Additional Information:

• Delivery Time: READY STOCK

I.Introduction:

Main Used In Belt Tension Measurement,Can Also Be Applied To Measure The Tension Of Objects Such As Tapes,Wires.Widely Applied In Industries Of Automobile,Textile,Cables,Wires,Plastic Films,Paper,Printting. 

 

II.Parameters:

Measuring Range:
                 0-750n
                 0-120lb
                 0-77kg
                 0-114seems
Accuracy:        <&=5%
Belt State Indication: Low,Ok,Hi
Resolution:      +/-1n (Or1 Least Significant Digit Of Other Units)
Belt Width:      <&=36mm
Overload Alarm :  750n
Max. Load:       850n
Metric/Imperial
Auto Power Off
Pc Interface :    Rs-232c
Power Supply : 4*1.5v Aaa(Um-4)
Operating Condition: 0 ~50c,< 85% Rh
Dimension:       135*62*33mm (5.3*2.4*1.3inch)
Net Weight:     335g(Not Including Batteries)
Accessories:  Cable And Software For Rs-232 

Model Name/Number	Adhesion Tester KIT
Usage/Application	Industrial
Packaging Type	Box
Display Type	Analog

Cross Hatch Cutter | Adhesion Tester Kit

As Per ASTM standard 3359-13 & DIN STANDARD 53151

Widely used to evaluate the adhesion of various coatings .A high precise machined presenting 6 or 11 cutting blades with various spacing is mounted in a handle. The test is carried out by performing 2 series of crossed cuts at right angle. The obtained lattices is either brushed or cleared with adhesion tape. According to the coatings thickness and the related spacing, the results can be classified with reference to a standard scale. It has long life tool with 6 cutting edges and comfortable handle.

When applied to multi-coat system, assessment of the resistance to separation of individual layers of the coating from each other may be made.

Main Technical Parameters
Multi-cutting blades spacing:1mm/2mm

Packing List

• Carrying case
• Cross Hatch Cutter & Handle
• 1 roll of 3M Scotch Transparent Tape(3M610)
• Brush
• Magnifier

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),Other

* Die cavity of molds Application : 1,Inspection of bearing and other mass produced parts on a Failure analysis of pressure vessel, steam generator and other equipment 2, Inspection of installed machinery, permanent parts of assembled systems and heavy work pieces. 3, Testing surface of a small hollow space 4,Material identification in the warehouse of metallic materials.

Specifications :-

Display : 12.5mm LCD with back light
Accuracy : Display error ±0.8% at LD=900
Measuring range : 200-900L
Conversion : HL-HRC-HRB-HB-HV-HSD
Materials : 9 different common materials
Memory : 250 data can be stored and re-readable
Impact device : D Will handle the majority of hardness testing
Weight : 130g
Power supply : 2x1.5V AAA size battery
Dimension : 146 × 65 × 36mm

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

PRESS O FILM

Replica tape for measuring blasted surface profiles. By placing the Tqc replica tape on the surface and rubbing over it, the Rt (total roughness) or peak-to-valley height of the profilecan be taken and then measured with a film thickness meter.

1. TQC Replica tape consists of a layer of compressible foam affixed to an incompressible polyester substrate.

2. When pressed against a roughened/gritblasted (steel) surface, the foam collapses acquiring an impression of the surface.

3. Placing the compressed tape between the anvils of the micrometric thickness gage, and subtracting the contribution of the incompressible substrate (50 micrometers or 0.002 inches), gives a measure of the surface profile.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Digital Angle Meter

It Is A Precision Measuring Device Which Enables Quick Measuring And Transferring Of Angles. It Is Mainly Intended For Applications Which Involve The Definition Of The Exact Angles, E.G. For Niches And Bays, Sloping Roofs And Handrails. With Its Horizontal And Vertical Bubble Level, It Can Also Be Used As A Spirit Level.

FEATURES :

Easily Readable Digital Display Shows The Exact Angle At Once.

With Its Horizontal And Vertical Bubble Level, It Can Be Used As A Spirit Level.

Angles Can Be Determined With Accuracy Of ±0.5°.

The Measuring Scale Extends From 0-185°I.E. Over The Whole Scale You Have A 0.1° Reading.

Digital Display Screen And Backlight.


DESCRIPTION :

1. Plastic Scale Arm
2. On/Off Button
3. Hold & Backlight Button
4. LCD Display
5. Vertical Glass Vival
6. Horizontal Glass Bubble

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Application :

• The Surface luster measure for printing ink, oil,paint,bake lacquer, coat,wood work and others.

• The Surface luster measure for construction decoration materials : marble, granite, glass chemical polishing brick, pottery brick.

• The Surface luster measure for plastic and sheet.

• The Surface luster measure for other non-metal materials.


Product Description
60 Degree Single Angle Gloss Meter.


Specifications

· Measure range: 0-200Gu

· Measure range: <+/-0.4Gu/30min

· Value error: <+/-1.2Gu

· Power: DC9V*1

· Projecting angle: 60 degree gloss meter

· Environment temperature: 0~40 degree Celsius

· Relative humidity: <-85%

· Dimension: 114*70*38mm


Package Contents

• Standard Plate
• 2*Batteries
• Cleaning Cloth
• Manual
• Warranty Card