Product Introduction

Portable Surface Roughness Tester - TIME3100 is a pocket-sized economically priced instrument for measuring surface texture conforming to traceable standards. It can be used on the shop floor in any position, horizontal, vertical or anywhere in between.

The large LCD display shows either roughness parameter Ra or Rz at the touch of a button, combined with the selected cut-off length. External calibration of roughness values is possible by means of a special CAL button, which makes adjustment of this instrument very easy. A beep signal informs the user of each individual measurement status when ready.

The easy to use TIME3100 operates on various surfaces, not only flat but also outer cylinder, outer cone, grooves, and recesses greater than 80 X 30mm. The areas of application are wide spread. This unit is most suitable for inspection departments, quality control, on the shop floor during machining, assembly and on-site.

TIME3100 determines both roughness parameters Ra and Rz within a wide measuring range (See specifications below). The piezo-electric pick-up stylus with diamond tip assures a very reliable measurement within tolerances in conformance with ISO Class 3. Ra parameter is in conformance to ISO while Rz conforms to DIN standards

Features

• Pocket-size & economically price
• Large measuring range suitable for most materials
• Measures flat, outer cylinder and sloping surface
• Both Ra and Rz parameters in one instrument
• Features external calibration at keyboard
• Standard conform to ISO and DIN
• Rechargeable batteries, work while charging

Technical Specification

Standard Delivery

• Main unit
• Protection cover for pickup
• Ra Specimen
• Charger
• TIME certificate
• Instruction manual
• Warranty card

TIME3200/3202 Surface Roughness Tester is a cost-effective roughness measuring equipment which supports more parameters. It is small and light. Quitely suitable for on-site roughness testing.

Features
Over dozen measurement parameters applicable for roughness test of various mechanical manufacturing processes inproduction lines, workshops and labs.
High accuracy inductive pickup
Easy operation manual and large LCD display with backlight.
Pickup stylus position indicator.
Transfer to PC via RS232 with advanced PC Software TIMESurf for more analyzing management.
Connected with printer to print the data and graphs on-site.
Storage and review function for up to 15 groups data and graphs.
Rk data and graphic are available.
Digital filter RC, PC-RC, Gauss, D-P
Optional delicate accessories for more accurate results and easier operation eg. measuring platform,steel support and so on
Conform to ISO standard, compatible with DIN, ANSI and JIS standard.
Top quality Li-ion rechargeable battery.

TIME5302 can perform standard hardness testing for metal materials. Supports output to PC with dataview software.

Features
Simple menu, easy and convenient to use.
Conversion of common hardness scales (HL, HV, HB, HRC, HRB, HRA and HS) & conversion to tensile strength.
7 types of optional impact devices with auto recognition. Standard impact device D included.
Matrix LCD display with backlight for convenient use in darkness.
Memory of 48-350 groups of data.
Upper /Lower limits pre-setting and sound alarm.
Dataview software as optional accessory
RS232 connector meets more needs like storage and further analysis.
Indication for charge and easy change for rechargeable battery.
Removableprinter included and test values can be printed directly.

Technical Specifications

Product Introduction
Based on the testing principle of Leeb hardness, TIME 5100 / TIME 5102 / TIME 5104 portable hardness tester can test the hardness of various metal materials fast and conveniently. It can be used to test the hardness of steel, cast steel, alloyed steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloy (brass),copper tin alloy (bronze),pure copper, forging steel and so on. The pure English display menu makes it easy to operate. It also has the advantage of long stand-by time due to the internally-stalled NiMH rechargeable battery. It is suitable for testing those workpieces that have large volume or hard to move.

Features
USB communication interface
Automatic identification of impact test direction
Memory of 270 average testing in 9 group files
Upper and lower limit setting
Automatically switch off
Backlight for convenient use in darkness
Battery capacity display
Integrated calibration function
TIME 5100: integrated with D impact device for normal hardness testing
TIME 5102: integrated with C impact device for hardness testing on thin, light and face-hardened work pieces
TIME 5104: integrated with DL impact device for hardness testing of deep grooves and tooth surface

Technical Specification

Standard Delivery
Main unit, Test Block, Mini USB cable, Support ring, Charger, Nylon brush, Instruction manual, TIME certificate

TIME5300is an advancedportable leeb hardness tester, which provides high accuracy and simplicity for operation for a wide measuring range. It is suitable for testing the hardness of all metallic materials, and is widely applied in many industries such as petroleum, chemistry, machinery and electric power industries, etc.

Features

Simple menu, easy and convenient to use

Conversion of common hardness scales (HL, HV, HB, HRC, HRB, and HS) &Conversion of Tensile Strength

Screen display showing all the important values and information (including values, mean value(MEAN), numbers of measuring(NO.),date, impact direction, materials tested, hardness values and so on)

7 types of Optional Impact Devices, with auto recognition, universal standard D type included

High accuracy and wide range options for testing( including Steel and Cast steel, Forged Steel, Cold Work Tool Steel, Stainless Steel, Gray Cast Iron, Nodular Cast Iron, Cast Aluminum Alloys, Brass (Copper-zinc alloys), Bronze (copper-aluminum/copper-tin alloys), Wrought Copper Alloys)

Measuring DirectionAny direction 360 Degreeeven with probe pointing up

Indication for charge and easy change for rechargeable battery

Printer included and test values can be printed directly

Software calibration

Auto power off

Technical Specification

Features

Impact device G for Solid components, e.g. heavy castings and forgings.

Two work modes either in Individual mode, or in System mode (as the Impact device G

for TIME5200)

Testing materials, hardness scale, testing direction and measurement times can be chosen

Conversion among 3 hardness scales HLG,HB,HRB

Automatic identification of impact test direction

Reviewdelete current measured data & calculate the average values automatically

Memory of 200 average values

Transfer to PC via USB in Word & Excel format , with Powerful PC Software included

Battery indicator with auto power off in low battery or 2 minutes without working

Technical Specification