Protexn Fire Services

Mechanical foam extinguisherright to use for class A & class B fire. Extinguishing agent is Aqua Film Forming Foam.

FEATURES:

• Stored Pressure Type.
• Dependable Drawn Steel Cylinders.
• Maintenance should be done as per ISI IS 15683.
• The Aqueous film forming foam is ISI IS 4989.
• ISI Standard Sizes are: 6L, 9L & 50L.

Novec 1230, C₆F₁₂O, (3M Novec 1230) fluid is a low global warming potential Halon replacement for use as a gaseous fire suppression agent. Novec 1230 is manufactured by 3M. It is generally used in situations where water from a fire sprinkler would damage expensive equipment or where water-based fire protection is impractical, such as museums, banks, clean rooms and hospitals.

3M Novec 1230 fluid does not deplete ozone (ODP 0) and has a global warming potential of 1 over 100 years.

Abc Modular Type Automatic Fire Extinguisher suitable for class A, Class B & Class C class of fire. Extinguishing agent is FE-36 Clean agent gas. 

FEATURES:

•  An Automatic Detection and Suppression System.
•  Stored Type Pressure. •`Siliconised' MAP based multi-purpose powder.
•  Maintenance should be done as per ISI IS 156863.
•  Mono ammonium phosphate powder ISI IS 1460941S
•  ISI IS Standard Sizes are: 5kg & 10kg.

Co2 fire extinguishers suitable for class B & class C fire. agent is cot gas-colorless & odorless.

   FEATURES:

• Co2 Stored Pressure Type /Clean Media.
• Manganese Steel / Carbon Steel.  
• Maintenance should be done as per ISI IS 15683.
• Carbon dioxide ISI IS 15222.
• ISI Standard sizes are: 2kg, 3kg, 4.5kg, 6.5kg, 9kg & 22.5kg.

Dry Chemical powder extinguishers utilized for class B & class C fire. Extinguishing agent is Sodium Bicarbonate.

FEATURES:

• Stored Pressure Type.
• MS Steel Cylinders.
• Maintenance should be done as per ISI IS 15683.
• Soduim Bicorbonate ISI IS 4308.
• ISI Standard Sizes are: 4kg, 6kg, 9kg, 25kg, 50kg & 75kg.

Water type Fire Extinguishercan be used for Class A fire. Extinguishing agent Water.

FEATURES:

• Stored Pressure Type.
• MS Steel Cylinders.
• Maintenance should be done for 151 IS 15683.
• ISI IS Standard Sizes are: 6L, 9L & 50L.

Also Known as IG- 55.It is blend of naturally available gases: N 2 - 50 %, Argon - 50 %

Oxygen levels in the hazard area are bought below 14 % by creation of an inerting atmosphere, so that the fire does not get sufficient O 2 for combustion.

Argon systems are environment-friendly, people-safe agent boasts ZERO ozone depletion potential, ZERO global warming potential, and ZERO atmospheric lifetime.

Carbon dioxide is a chemically neutral, colorless, and odorless gas about one and half time heavier than air. Carbon dioxide Extinguishing System utilises high pressure seamless steel cylinders in which Carbon dioxide is pressurised and stored in liquid form at 58.6 bars (850 psi) at 21 deg C (70 deg F). Carbon dioxide acts by depleting oxygen concentration in the protected space to a point below the level necessary to support combustion. It provides a blanket of heavy gas that reduces the oxygen content of the atmosphere to a point where combustion is not sustainable.

Salient Features of Carbon Dioxide as a Fire Extinguishent:

• Clean and effective
• Electrically safe
• Carbon dioxide is electrically non-conductive, hence safe for electrically charged installations.
• Non-corrosive
• Hence safe for equipment
• Broad spectrum of fire effectiveness
• Reduces Downtime
• Long term commercial availability

Carbon dioxide is a chemically neutral, colorless, and odorless gas about one and half time heavier than air. Carbon dioxide Extinguishing System utilises high pressure seamless steel cylinders in which Carbon dioxide is pressurised and stored in liquid form at 58.6 bars (850 psi) at 21 deg C (70 deg F). Carbon dioxide acts by depleting oxygen concentration in the protected space to a point below the level necessary to support combustion. It provides a blanket of heavy gas that reduces the oxygen content of the atmosphere to a point where combustion is not sustainable.

Salient Features of Carbon Dioxide as a Fire Extinguishent:

• Clean and effective
• Electrically safe
• Carbon dioxide is electrically non-conductive, hence safe for electrically charged installations.
• Non-corrosive
• Hence safe for equipment
• Broad spectrum of fire effectiveness
• Reduces Downtime
• Long term commercial availability

FM-200 is the commercial name for Heptafluoropropane, CF 3CHFCF 3, and is a Hydrofluoro carbon belonging to the same class of compounds used in refrigerants, but with Zero Ozone depletion potential . It is produced and patented by the Great Lakes Chemical Corporation, USA.The FM-200® agent is stored in cylinders as a liquid and pressurized with nitrogen, saving huge amounts of storage space.

FM-200 fire suppression system discharges as a gas, leaves no residue and doesn't require costly clean-up. FM-200 systems reach extinguishing levels in 10 seconds or less. When fire is extinguished this quickly, it means less damage, lower repair costs, and an extra margin of safety for people and less disruption of business. FM200 is a clean agent – it has no collateral damage on the equipments in the hazard area, in case of a discharge.

• Highly reliable
• Executed in assured time frame
• Rendered by efficient working team

• Specialized engineering techniques
• High quality industry standard
• Customized as per specifications

Brand: ABC