Purva Vashi Electricals And Services Private Limited

With rich industry experience & knowledge, we have been able to provide the best array of Inverter Duty Motors.

Features:

• Compact design
• Optimum functionality
• Less power consumption

Specifications:

• Suitable for continuous operation at the rated outputs, for the voltage and frequency conditions at an ambient of 40°c
• While delivering the rated outputs, the motors will have temperature rise beyond class b limits but well within class f limits
• All the motors up to 630 KW are suitable for 415v supply. Ratings beyond 710 kw are suitable for 690v supply. Frequency in both the cases is 50 Hz

Additional Information:

• Item Code: IDM001

Being one of the trusted firms in the industry, we are highly engaged in providing a unique range of Standard Electric Motors.

Features:

• Rust resistance
• Less maintenance
• Longer service life

Used in:

• Ship propulsion
• Pipeline compression
• Pumped-storage

Additional Information:

• Item Code: SEM001

We are a unique name in the industry to provide our prestigious clients an exclusive range of Energy Saving Motors.

Features:

• Energy efficient
• Less heat generation
• Non-abrasive

Operation sequence:

• During continuous operation, the self-ventilated motors cannot generate their full rated torque over the whole speed range
• The continuously permissible torque is also lowered when the speed is reduced due to the reduced cooling effect
• Depending on the speed range, a corresponding torque reduction and therefore power-output reduction has to be carried out in the case of self-ventilated motors

Additional Information:

• Item Code: ESM001

This series are used for Crane Duty applications / Lift duty applications where movement of inertia of the load is maximum equal to movement of inertia of motor. For S3 series the duty cycle is designated as S3-40%, S3-60%. The no. of starts is also less, either 45 or 60 starts per hour. For S4 Series the duty designation is mentioned as S4 - 60% CDF, 150 starts per hour Extra.

S3 Series of motors can be used in :

• Valve acctuators.
• Wire drawing machines.

S4 Series of motors can be used in :

• Hoist
• Cranes
• Lifts

Additional Information:

• Item Code: DM002

Frames :100 to 355L ,Rating :2.2 to 315.0 kW , Poles :2, 4, 6 & 8 , Mountings :B3, B5, B14 & combinations , Protection :IP55 , Enclosure :TEFC

• Energy Efficient Motors produce the same shaft output but draws less input power than a standard motor.
• Advantages of Energy Efficient Motors
• Saves Energy & Money
• Near uniform efficiency from 50% to 100% of full load ensuring energy savings even at part load conditions also.
• Short payback period
• Substantial savings after payback period
• Hindustan Energy Efficient Motors Range
• “Hindustan” Energy efficient motors are designed as per the values specified in IS: 12615. They have near uniform efficiencies between 50 & 100% of load. These motors are available from 2.2 kW to 200.0 kW in 2 & 4 pole varieties.
• Frames :100 to 355L
• Rating :2.2 to 315.0 kW
• Poles :2, 4, 6 & 8
• Mountings :B3, B5, B14 & combinations
• Protection :IP55
• Enclosure :TEFC

Additional Information:

• Item Code: EFM001

Frames :56 to 355L ,Rating :0.093 to 315.0 kW ,Poles :2, 4, 6 & 8 ,Mountings :B3, B5, B14 & combinations ,Protection :IP55 ,Enclosure :TEFC

• Frames :56 to 355L
• Rating :0.093 to 315.0 kW
• Poles :2, 4, 6 & 8
• Mountings :B3, B5, B14 & combinations
• Protection :IP55
• Enclosure :TEFC

Additional Information:

• Item Code: HESM001

Hindustan cooling tower motors are specially designed flange mounted motors in totally enclosed construction to suit air conditioning & refrigeration industries.

• Hindustan cooling tower motors are specially designed flange mounted motors in totally enclosed construction to suit air conditioning & refrigeration industries. These motors are provided with a special long shaft construction with external threaded end to directly mount fan blades.
• Frames :71 to 280
• Rating :0.37 to 22.0 kW
• Poles :4, 6, 8, 10 & 12
• Mountings :B3 or B5
• Protection :IP55
• Enclosure :Totally Enclosed (TE)

Additional Information:

• Item Code: CTM001

They can be used in applications such as material handling, weirs & sluices, auxiliary motors in rolling mills or wherever intermittent drives are required.

• Motoring the wheels of success
• “Hindustan” brand crane duty motors are specially designed for request. The terminal box can be rotated in steps of 90° in each frequent starts/stops & reversing required in cranes & lifts of all position.types. They can also be used in applications such as material handling, weirs & sluices, auxiliary motors in rolling mills or wherever intermittent drives are required.
• Frames :71 to 200L
• Rating :0.18 to 30.0 kW
• Poles :4, 6 & 8
• Mountings :B3, B5, B14 & combinations
• Protection :IP55
• Enclosure :S3 - S5
• Starts/hour :60, 150, 300 Nos.

Additional Information:

• Item Code: CDM001

Frames :71 to 355L ,Rating :0.12 to 150.0 kW ,Poles :4/2, 8/4, 6/4, 8/6 & combinations , Mountings :B3, B5, B14 & combinations , Protection :IP55 Enclosure :TEFC

• Frames :71 to 355L
• Rating :0.12 to 150.0 kW
• Poles :4/2, 8/4, 6/4, 8/6 & combinations
• Mountings :B3, B5, B14 & combinations
• Protection :IP55
• Enclosure :TEFC

Additional Information:

• Item Code: MSM001

BE Series - Industry, Mobile Machinery & Automation.

• kW rating (4pole):0.06....30kW
• Frame Sizes: 56A.... 200L
• Pole numbers: 2,4,6,8,2/4,2/6,2/8,2/12,4/6,4/8
• Inverter duty compliance
• CS & UL approved design
• Available with IE1 & IE2 Class, DC & AC Brake, Servo ventilation, encoder, line driver & thermistors.

Additional Information:

• Item Code: BSM001

Single-phase motors of the BS series are manufactured to the applicable IEC standards and are of the enclosed type, externally ventilated and with run capacitor permanently connected. Motors are available in the B5 and B14 flange mountings, in the 4-pole execution. For applications requiring high starting torque the version with both the run and the starting capacitor can be specified.

• kW ratings
• 0,06 … 1,5 kW
• Frame sizes
• 56A to 90L
• Poles
• 4
• Mounting
• Flange mounting IM B5 and IM B14
• Frequency
• 50 and 60 Hz
• European Norms
• 2006/95/EC (LVD) and 2004/108/EC (EMC)
• Housing
• Cast Aluminium
• Main options
• Starting and run capacitors
• Bimetal thermal protector
• Balanced winding

Additional Information:

• Item Code: BSM003

Siemens Champion Series Cage Motors are suitable for the most diverse applications. The Motors are available in the wide range from frame sizes 63 to 132M and they conform to EFF2 standards for efficiency. These motors have a high efficiency and high uptime.

• Siemens Champion Series Cage Motors have a high efficiency and high uptime. Consequently the productivity is higher and energy consumption lower. The motors have low life cycle costs, hence great saving.
• The motors are available from frame sizes 63 to 132M in 2 and 4 pole, and 71 to 132M in 6 pole design.
• These motors are suitable for 415V ±10%, 50Hz ±5%, combined ±10%, 3 phase AC supply.
• All motors in normal design are suitable for an ambient temperature up to 50°C.

Additional Information:

• Item Code: BM001

In order to retain our goodwill in this industry, we are providing a latest array of Brake Motors.

Features:

• High efficiency
• High load bearing capacity
• Optimum functionality

Specifications:

• Size: 63 to 132M in 2 and 4 pole and 71 to 132M in 6 pole
• These motors are suitable for 415V ±10%, 50Hz ±5%, combined ±10%, 3 phase AC supply
• All motors in normal design are suitable for an ambient temperature up to 50°C

Additional Information:

• Item Code: BM002

The motors are designed for the 3 phase 415v +- 10% & 50 Hz +- 5% with combined variation of +- 10% . any other voltage & or frequency is available upon request.

• The motors are designed for the 3 phase 415v +- 10% & 50 Hz +- 5% with combined variation of +- 10% . any other voltage & or frequency is available upon request.
• Frames :63 to 280M
• Rating :0.18 to 90.0 kW
• Poles :2, 4, 6 & 8
• Mountings :B3, B5, B14 & combinations
• Protection :IP55
• Enclosure :TEFC

Additional Information:

• Item Code: FM001

A torque motor is a specialized form of electric motor which can operate indefinitely while stalled, that is, with the rotor blocked from turning, without incurring damage. In this mode of operation, the motor will apply a steady torque to the load (hence the name). A torque motor that cannot perform a complete rotation is known as a limited angle torque motor. Torque motors are normally induction motors of toroidal construction. Their main differences from other similar motors are their wide diameters, to allow for high levels of torque, and their thermal performance, to allow their continuous operation while drawing high current in a stalled state.

• Frames : 63 to 160L
• Rating : 0.037 to 5.5 kW
• Poles : 4, 6 & 8
• Mountings : B3, B5, B14 or special
• Protection : IP55
• Enclosure : Totally enclosed or force cooled
• Torque : 0.048 to 3.57 kg.m

Additional Information:

• Item Code: TM001

Hindustan range of Textile Motors embraces practically all Textile Machinery drives and are suitable for operation on 415 volts±10% supply with IP 55 protection and F class of Insulation with temperature rise limited to ‘B’. The range comprises motors meeting requirements of Textile processes such as Fibre Preparation, Carding, Weaving, Combing and Drawing, Spinning and Doubling.

• Frame : 100 to 180L
• Rating : 0.55 to 15.0 kW
• Poles : 4, 6 & 8
• Mountings : B3, B5, B14, Pad & combinations
• Protection : IP55
• Enclosure : TE, TEFC with clean flow construction
• Applications : Ring, Loom, Carding, Ginning & Spinning.

Additional Information:

• Item Code: TM002

The IEC-normalized Bonfiglioli Electric Motors comply with all the applicable international standards, including the EMC and LV Directives. They are available in the 0.06 - 30 kW range in the foot and the flange mounting version, the latter in both the IM B5 and the IM B14 configuration. Single and dual pole versions available with generally, three brake options offered, one DC and two AC supply, lending further flexibility to the system. Finally, all motors are inverter duty.

• kW rating (4 pole)
• 0.06 kW ... 30 kW
• Frame Sizes
• 56A ... 200L
• Pole Numbers
• 2, 4, 6, 8, 2/4, 2/6, 2/8, 2/12, 4/6, 4/8
• Mounting Options
• Foot IM B3
• Flange IM B5 and IM B14
• Operation
• 50 Hz and 60 Hz
• Compliance
• 2006/95/EC (LVD) and 2004/108/EC (EMC)
• Inverter Duty
• All frame sizes
• Housing
• Cast aluminium
• Main Brake Features
• DC and AC supply
• Faster brake engage/disengage through electronically
• Controlled AC/DC rectifier type SB, NBR, SBR (options)
• Main Options
• Thermistors and thermostates sensors
• Separate supply forced ventilation
• Line driver and push-pull incremental encoder
• CSA and UL approved design

Additional Information:

• Item Code: BSM002

Bonfiglioli's mission is to design, produce and market transmission units with the best management in terms of environmental protection, product quality, and efficiency and economy of process. The Bonfiglioli Vectron Servomotor range is made up of two series of actuators, one designated BCR and the other BTD. BCR offers a large torque reserve and long lifetime, as well BTD provides a big dynamic coefficient and low heating. Each series includes a number of mechanical sizes, corresponding to different flange dimensions. Each flange size is available with motors of different lengths, capable of developing different levels of torque. The BCR series is designed to guarantee a broad continuous torque interval of up to 115Nm with a corresponding overload of 400%. The BTD series is designed to satisfy the need for high torque from compact motors. The stator winding technology and excellent quality of the permanent magnets in the rotor allow the BTD series to achieve a torque density of 15.3 Nm/dm3.

• High torque and overload
• High torque into restricted volume
• High torque and efficiency
• High overload and large speed range

Additional Information:

• Item Code: BSM004