X

PWHT Solutions Private Limited

Porur, Chennai, Tamil Nadu

| GST  33AAICP2001K2ZR

is a member of IndiaMART

| Verified Supplier

|

★★★★★
★★★★★
View Mobile Number 82% Response Rate

Our Products

+View All

NDT Services

PWHT Solutions providesnon-destructive testing(NDT) materials testing and weldingservicesfor a diverse range of industries. We help you ensure the reliability and safety of your products, equipment or plant assets with our world-classservicesinnon-destructive testing(NDT) materials testing and welding quality.

IR Class Approved Ship Hull Inspection Services
Interested in this product?
Get Best Quote
Inspection Service ForMaterials
Industry TypeManufacturing
Usage/ApplicationIndustrial
Mode Of ReportSoft Copy, Hard Copy
Inspection MethodSpecific Instrumentation
Inspection IntervalYearly

IR Class Approved Ship Hull Inspection Services

We Proudly Announce That We Are Largest Marine Ndt Inspection Services Agency In India We Have More Than 50 Class Approved Technicians. Since Our Inception In 2012, We Are Proud To Have Done More Than 500 Surveys With Various Marine And Offshore Clients Worldwide. Our Experienced Riding Squads With Seamen Book/ All Major Visas Are Ready To Travel And Can Take Up Voyage Or Docking Surveys On Very Short Notice. Our Specialized Inspection Teams With Relevant Offshore Training And Medical Certification Can Cater To Requirements From Offshore Sector, Especially The Rigs, Fpso, Fso, Modu’s, Platforms And Well Head Units. We Are Certified Major Classification Societies Under IACS  (International Association Of Classification Societies). Certified By IR Class And IBR.

Pwht Offers Ship Hull Inspection Services To Ensure Ships Can Maintain Safe And Effective Operation While Meeting Applicable Standards. We Use Proven Nondestructive Testing Methods To Assess Both Ship Hull Thickness And Any Hull Defects Or Damage That May Be Present. Hull Damage Could Potentially Grow Into A Larger Safety Hazard For Both The Personnel And Cargo On Board If Left Unchecked.

Ships Sustain Hull Damage For A Variety Of Reasons. The Most Obvious Type Of Damage Is From Direct Impacts. Grounding – The Impact Of The Ship On Seabed – Can Cause Damage To The Underside Of The Ship. Impact Damage Can Vary Widely In Severity And Should Be Inspected As Soon As Possible Before It Develops Into A More Significant Problem.

View Complete Details

Yes, I am interested!

Visual Testing Services
Interested in this product?
Get Best Quote

Visual Testing Services

Get Latest Price

Minimum Order Quantity: 1 Piece

Inspection MethodVisual
Inspection Service ForIndustrial
Industry TypeManufacturing
Application TypeIndustrial
Mode of ReportHard Copy, Soft Copy
Inspection Area/PartWeld
Inspection IntervalOne Time Requirement
Need Test Result<2 Hours
Is It Need AMCNeed AMC
Need Standard CertificationYes

visual testing In manufacturing, welds are commonly used to join two or more metal parts. Because these connections may encounter loads and fatigue during product lifetime, there is a chance that they may fail if not created to proper specification. For example, the base metal must reach a certain temperature during the welding process, must cool at a specific rate, and must be welded with compatible materials or the joint may not be strong enough to hold the parts together, or cracks may form in the weld causing it to fail. The typical welding defects (lack of fusion of the weld to the base metal, cracks or porosity inside the weld, and variations in weld density) could cause a structure to break or a pipeline to rupture.
Visual Testing Services In Chennai

View Complete Details

Yes, I am interested!

Visual Testing Services
Interested in this product?
Get Best Quote

Visual Testing Services

Get Latest Price

Minimum Order Quantity: 1 Piece

Inspection MethodVisual
Inspection Service ForIndustrial
Industry TypeManufacturing
Application TypeIndustrial
Mode of ReportHard Copy, Soft Copy
Inspection Area/PartWeld
Inspection IntervalYearly
Need Test Result<2 Hours
Need Standard CertificationYes
Is It Need AMCNeed AMC

visual testing In manufacturing, welds are commonly used to join two or more metal parts. Because these connections may encounter loads and fatigue during product lifetime, there is a chance that they may fail if not created to proper specification. For example, the base metal must reach a certain temperature during the welding process, must cool at a specific rate, and must be welded with compatible materials or the joint may not be strong enough to hold the parts together, or cracks may form in the weld causing it to fail. The typical welding defects (lack of fusion of the weld to the base metal, cracks or porosity inside the weld, and variations in weld density) could cause a structure to break or a pipeline to rupture.
Visual Testing  Services In India

View Complete Details

Yes, I am interested!

Visual Inspection
Interested in this product?
Get Best Quote

Visual Inspection

Get Latest Price

Minimum Order Quantity: 1 Piece

Inspection MethodVisual
Inspection Service ForIndustrial
Mode of ReportSoft Copy, Hard Copy
Inspection Area/PartWeld
Inspection IntervalOne Time Requirement
Industry TypePlants

visual testing In manufacturing, welds are commonly used to join two or more metal parts. Because these connections may encounter loads and fatigue during product lifetime, there is a chance that they may fail if not created to proper specification. For example, the base metal must reach a certain temperature during the welding process, must cool at a specific rate, and must be welded with compatible materials or the joint may not be strong enough to hold the parts together, or cracks may form in the weld causing it to fail. The typical welding defects (lack of fusion of the weld to the base metal, cracks or porosity inside the weld, and variations in weld density) could cause a structure to break or a pipeline to rupture.

View Complete Details

Yes, I am interested!

Ultrasonic Thickness Testing Companies
Interested in this product?
Get Best Quote

Ultrasonic Thickness Testing Companies

Get Latest Price

Minimum Order Quantity: 1 Piece

Components of TestingPressure Vessels, Engine/Motor, Piping
Mode of ReportSoft Copy, Hard Copy
Product TypeTube
Application TypeManufacturer
Type of MaterialNon-Destructive
Product BaseMachinery
Place of TestingField
Need Test Result<2 Hours
ApplicationAerospace
AMC RequiredYes
Need Standard CertificationYes
Test Report RequiredYes
Standard Certification RequiredYes
Need Annual MaintenanceYes

UTG ultrasonic thickness measurement (UTM) is a method of performing non-destructive measurement (gauging) of the local thickness of a solid element (typically made of metal, if using ultrasound testing for industrial purposes) basing on the time taken by the ultrasound wave to return to the surface. This type of measurement is typically performed with an ultrasonic thickness gauge.

View Complete Details

Yes, I am interested!

RT Services
Interested in this product?
Get Best Quote

RT Services

Get Latest Price

Minimum Order Quantity: 1 Piece

Testing MethodologyRadiographic Testing
Service TypeQuality Control
ApplicationAeronautical Engineering
Value Data Report onMaterial Properties
Sector TypeAerospace
Certification SchemePersonal Central Certification

Industrial radiography is a method of non-destructive testing where many types of manufactured components can be examined to verify the internal structure and integrity of the specimen. Industrial Radiography can be performed utilizing either X-rays or gamma rays. Both are forms of electromagnetic radiation. The difference between various forms of electromagnetic energy is related to the wavelength. X and gamma rays have the shortest wavelength and this property leads to the ability to penetrate, travel through, and exit various materials such as carbon steel and other metals.

View Complete Details

Yes, I am interested!

RT Services
Interested in this product?
Get Best Quote

RT Services

Get Latest Price

Minimum Order Quantity: 1 Piece

Certification SchemePersonal Central Certification
Application TypeMechanical Engineering
Testing MethodologyRadiographic Testing
Value Data Report onMicrostructure
Sector TypeGas
Industry Body StandardsASNT
Weld Verification RequiredYes

Industrial radiography is a method of non-destructive testing where many types of manufactured components can be examined to verify the internal structure and integrity of the specimen. Industrial Radiography can be performed utilizing either X-rays or gamma rays. Both are forms of electromagnetic radiation. The difference between various forms of electromagnetic energy is related to the wavelength. X and gamma rays have the shortest wavelength and this property leads to the ability to penetrate, travel through, and exit various materials such as carbon steel and other metals.

View Complete Details

Yes, I am interested!

Positive Material Identification Testing Services
Interested in this product?
Get Best Quote

Positive Material Identification Testing Services

Get Latest Price

Minimum Order Quantity: 1 Piece

Product TypeMetal
Industry TypeProduction
Sample Test LocationIn Laboratory
Application TypeHazardous Material Inspection
Product CertificationWith Resale Value
Calibration Check RequiredYes
Resale Service RequiredYes

Positive Material Identification (PMI) is the analysis of a metallic alloy to establish composition by reading the quantities by percentage of its constituent elements. Typical methods for PMI include X-ray fluorescence (XRF) and optical emission spectrometry (OES).

View Complete Details

Yes, I am interested!

Positive Material Identification Testing Services
Interested in this product?
Get Best Quote

Positive Material Identification Testing Services

Get Latest Price

Minimum Order Quantity: 1 Set

Product TypeAlloy
Industry TypeProduction
Sample Test LocationCustomer Place
Application TypeMaterial Sorting
Product CertificationWith Resale Value
Calibration Check RequiredYes
Resale Service RequiredYes


Positive Material Identification (PMI) is the analysis of a metallic alloy to establish composition by reading the quantities by percentage of its constituent elements. Typical methods for PMI include X-ray fluorescence (XRF) and optical emission spectrometry (OES).

View Complete Details

Yes, I am interested!

Positive Material Identification Inspection
Interested in this product?
Get Best Quote

Positive Material Identification Inspection

Get Latest Price

Minimum Order Quantity: 1 Number

Product TypeMetal
Industry TypeProduction
Sample Test LocationCustomer Place
Application TypeScrap Inspection
Resistance CheckHeat Resistance
Product CertificationWith Resale Value


Positive Material Identification (PMI) is the analysis of a metallic alloy to establish composition by reading the quantities by percentage of its constituent elements. Typical methods for PMI include X-ray fluorescence (XRF) and optical emission spectrometry (OES).

View Complete Details

Yes, I am interested!

UTG Inspection
Interested in this product?
Get Best Quote

UTG Inspection

Get Latest Price

Minimum Order Quantity: 1 Set

Inspection Service ForMaterials
Industry TypeManufacturing
Usage/ApplicationIndustrial
Mode of ReportSoft Copy, Hard Copy
Inspection MethodSpecific Instrumentation

UTG ultrasonic thickness measurement (UTM) is a method of performing non-destructive measurement (gauging) of the local thickness of a solid element (typically made of metal, if using ultrasound testing for industrial purposes) basing on the time taken by the ultrasound wave to return to the surface. This type of measurement is typically performed with an ultrasonic thickness gauge.

View Complete Details

Yes, I am interested!

Positive Material Identification Inspection
Interested in this product?
Get Best Quote

Positive Material Identification Inspection

Get Latest Price

Minimum Order Quantity: 1 Piece

Product TypeSteel
Industry TypeProduction
Sample Test LocationCustomer Place
Application TypeScrap Inspection
Resistance CheckCorrosion Resistance

Positive Material Identification (PMI) is the analysis of a metallic alloy to establish composition by reading the quantities by percentage of its constituent elements. Typical methods for PMI include X-ray fluorescence (XRF) and optical emission spectrometry (OES).

View Complete Details

Yes, I am interested!

Ultrasonic Thickness Measurements UTM
Interested in this product?
Get Best Quote
MaterialSteel
Country of OriginMade in India

Ultrasonic thickness measurement (UTM) is a non-destructive testing method used to inspect the metal thickness of ship hulls, piping and structural steel. Thickness measuring is essential across many industries to monitor corrosion, erosion and damage.

View Complete Details

Yes, I am interested!

Liquid Penetrant Testing Services
  • Liquid Penetrant Testing Services
  • Liquid Penetrant Testing Services
Interested in this product?
Get Best Quote

Liquid Penetrant Testing Services

Get Latest Price

Minimum Order Quantity: 1 Piece

Watch Video

Report AspectSize/Depth of Penetration
Service TypeDye Penetration
Place of ServiceFactories
Application TypeOil & Gas Piping
ApplicationR & D
Testimonials FormatHardcopy
Applying MethodSpraying
Time Duration<2 Hours
Crack Testing TypeCorrosion Crack
Material TypeMetal
Certification StandardBS EN
Testing Report RequiredYes
Testing Product TypeBar
Flaw IdentificationCrack
Training Course OnASTM Testing Methods
Standard Certificates RequiredYes
Periodic Review RequiredYes

Dye penetrant inspection (DP), also called liquid penetrate inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to check surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, although for ferrous components magnetic-particle inspection is often used instead for its subsurface detection capability. LPI is used to detect casting, forging and welding surface defects such as hairline cracks, surface porosity, leaks in new products, and fatigue cracks on in-service componen.

View Complete Details

Yes, I am interested!

Liquid Penetrant Testing Services
  • Liquid Penetrant Testing Services
  • Liquid Penetrant Testing Services
Interested in this product?
Get Best Quote

Liquid Penetrant Testing Services

Get Latest Price

Minimum Order Quantity: 1 Piece

Watch Video

Place of ServiceFactories
Report AspectSize/Depth of Penetration, Chemical Parameter, Shape of Penetration
Service TypeDye Penetration
Application TypeOil & Gas Piping
ApplicationConstruction
Testimonials FormatE-Mail
Time Duration<2 Hours
Applying MethodSpraying
Material TypeMetal
Crack Testing TypeCorrosion Crack
Metal TypeFerrous Metal
Certification StandardBS EN
Testing Report RequiredYes
Testing Product TypePlate
Training Course OnANSI Levels
Flaw IdentificationCrack
Standard Certificates RequiredYes
Periodic Review RequiredYes

Dye penetrant inspection (DP), also called liquid penetrate inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to check surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, although for ferrous components magnetic-particle inspection is often used instead for its subsurface detection capability. LPI is used to detect casting, forging and welding surface defects such as hairline cracks, surface porosity, leaks in new products, and fatigue cracks on in-service components.

View Complete Details

Yes, I am interested!

Liquid Penetrant Testing Inspection
  • Liquid Penetrant Testing Inspection
  • Liquid Penetrant Testing Inspection
Interested in this product?
Get Best Quote

Liquid Penetrant Testing Inspection

Get Latest Price

Minimum Order Quantity: 1 Piece

Watch Video

Report AspectSize/Depth of Penetration, Chemical Parameter, Shape of Penetration
Place of ServiceFactories
Service TypeDye Penetration
ApplicationR & D
Application TypeOil & Gas Piping
Testimonials FormatE-Mail
Time Duration<2 Hours
Crack Testing TypeCorrosion Crack
Material TypeMetal
Soil Testing TypeResistance Properties
Sample Test LocationIn-House
Testing Report RequiredYes
Certification StandardASME
Testing Product TypePlate
Training Course OnASTM Testing Methods
Flaw IdentificationCrack
Periodic Review RequiredYes

Dye penetrant inspection (DP), also called liquid penetrate inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to check surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, although for ferrous components magnetic-particle inspection is often used instead for its subsurface detection capability. LPI is used to detect casting, forging and welding surface defects such as hairline cracks, surface porosity, leaks in new products, and fatigue cracks on in-service components.

View Complete Details

Yes, I am interested!

Ultrasonic Thickness Measurement Services
Interested in this product?
Get Best Quote

Ultrasonic Thickness Measurement Services

Get Latest Price

Minimum Order Quantity: 1 Piece

Components of TestingPressure Vessels, Hulls
Testing Report MethodHardcopy, Mail
Mode of ReportSoft Copy, Hard Copy
Place of TestingField
Application TypePetro-Chemical
Is It Need AMCNeed AMC
Need Fault ReplacementYes



UTG ultrasonic thickness measurement (UTM) is a method of performing non-destructive measurement (gauging) of the local thickness of a solid element (typically made of metal, if using ultrasound testing for industrial purposes) basing on the time taken by the ultrasound wave to return to the surface. This type of measurement is typically performed with an ultrasonic thickness gauge.

View Complete Details

Yes, I am interested!

High Temperature Ultrasonic Thickness Measurement Services
Interested in this product?
Get Best Quote

High Temperature Ultrasonic Thickness Measurement Services

Get Latest Price

Minimum Order Quantity: 1 Piece

Components of TestingHulls, Piping, Any, Pressure Vessels
Testing Report MethodHardcopy, Mail
Mode of ReportHard Copy, Soft Copy
Place of TestingField
Application TypeMarine Services
Is It Need AMCNeed AMC
Need Fault ReplacementYes

UTG ultrasonic thickness measurement (UTM) is a method of performing non-destructive measurement (gauging) of the local thickness of a solid element (typically made of metal, if using ultrasound testing for industrial purposes) basing on the time taken by the ultrasound wave to return to the surface. This type of measurement is typically performed with an ultrasonic thickness gauge.

View Complete Details

Yes, I am interested!

Ultrasonic Thickness Gauging Inspection
Interested in this product?
Get Best Quote

Ultrasonic Thickness Gauging Inspection

Get Latest Price

Minimum Order Quantity: 1 Set

Mode of ReportSoft Copy, Hard Copy
Components of TestingPiping, Engine/Motor, Pressure Vessels
Product TypeTube
Test LocationCustomer Place
Type of MaterialNon-Destructive
Place of TestingField
Need Test Result<2 Hours
ApplicationPetro-Chemical
Need Standard CertificationYes
Test Report RequiredYes
Standard Certification RequiredYes
Need Annual MaintenanceYes

UTG ultrasonic thickness measurement (UTM) is a method of performing non-destructive measurement (gauging) of the local thickness of a solid element (typically made of metal, if using ultrasound testing for industrial purposes) basing on the time taken by the ultrasound wave to return to the surface. This type of measurement is typically performed with an ultrasonic thickness gauge.

View Complete Details

Yes, I am interested!

Ultrasonic Thickness Measurement Inspection
Interested in this product?
Get Best Quote

Ultrasonic Thickness Measurement Inspection

Get Latest Price

Minimum Order Quantity: 1 Piece

Components of TestingPiping, Pressure Vessels, Hulls, Any
Testing Report MethodHardcopy, Mail
Mode of ReportSoft Copy, Hard Copy
Place of TestingField
Application TypePetro-Chemical
Is It Need AMCNeed AMC
Need Fault ReplacementYes

UTG ultrasonic thickness measurement (UTM) is a method of performing non-destructive measurement (gauging) of the local thickness of a solid element (typically made of metal, if using ultrasound testing for industrial purposes) basing on the time taken by the ultrasound wave to return to the surface. This type of measurement is typically performed with an ultrasonic thickness gauge.

View Complete Details

Yes, I am interested!

High Temperature Ultrasonic Thickness Measurement Inspection
Interested in this product?
Get Best Quote

High Temperature Ultrasonic Thickness Measurement Inspection

Get Latest Price

Minimum Order Quantity: 1 Piece

Components of InspectionPressure Vessels, Piping, Engine/Motor
Components of TestingPressure Vessels, Hulls, Piping, Any
Testing Report MethodMail, Hardcopy
Inspection TypeWeld Inspection, Magnetic Particle Inspection, Liquid Penetrate Inspection
Mode of ReportSoft Copy, Hard Copy
Place of TestingField
Application TypePetro-Chemical
Type of MaterialNon-Destructive
Is It Need AMCNeed AMC
App IncludesGear Boxes, Bearings, Compressors Motors
Need Fault ReplacementYes
Need Annual MaintenanceYes
Test Report RequiredYes

UTG ultrasonic thickness measurement (UTM) is a method of performing non-destructive measurement (gauging) of the local thickness of a solid element (typically made of metal, if using ultrasound testing for industrial purposes) basing on the time taken by the ultrasound wave to return to the surface. This type of measurement is typically performed with an ultrasonic thickness gauge.

View Complete Details

Yes, I am interested!

Ultrasonic Thickness Measurement
Interested in this product?
Get Best Quote

Ultrasonic Thickness Measurement

Get Latest Price

Minimum Order Quantity: 1 Piece

Components of TestingPressure Vessels, Any, Hulls, Piping
Testing Report MethodHardcopy, Mail
Mode of ReportSoft Copy, Hard Copy
Place of TestingField
Application TypeMarine Services
Is It Need AMCNeed AMC
Need Fault ReplacementYes

UTG ultrasonic thickness measurement (UTM) is a method of performing non-destructive measurement (gauging) of the local thickness of a solid element (typically made of metal, if using ultrasound testing for industrial purposes) basing on the time taken by the ultrasound wave to return to the surface. This type of measurement is typically performed with an ultrasonic thickness gauge.

View Complete Details

Yes, I am interested!

High Temperature Ultrasonic Thickness Measurement
Interested in this product?
Get Best Quote

High Temperature Ultrasonic Thickness Measurement

Get Latest Price

Minimum Order Quantity: 1 Piece

Components of TestingPressure Vessels, Hulls, Piping, Any
Testing Report MethodHardcopy, Mail
Mode of ReportSoft Copy, Hard Copy
Place of TestingField
Application TypePetro-Chemical
Is It Need AMCNeed AMC
Need Fault ReplacementYes


UTG ultrasonic thickness measurement (UTM) is a method of performing non-destructive measurement (gauging) of the local thickness of a solid element (typically made of metal, if using ultrasound testing for industrial purposes) basing on the time taken by the ultrasound wave to return to the surface. This type of measurement is typically performed with an ultrasonic thickness gauge.

View Complete Details

Yes, I am interested!

UTG Services
Interested in this product?
Get Best Quote

UTG Services

Get Latest Price

Minimum Order Quantity: 1 Number

Components of TestingPressure Vessels, Piping, Hulls, Any
Testing Report MethodHardcopy, Mail
Mode of ReportSoft Copy, Hard Copy
Place of TestingField
Application TypeAerospace
Is It Need AMCNeed AMC
Need Fault ReplacementYes


UTG ultrasonic thickness measurement (UTM) is a method of performing non-destructive measurement (gauging) of the local thickness of a solid element (typically made of metal, if using ultrasound testing for industrial purposes) basing on the time taken by the ultrasound wave to return to the surface. This type of measurement is typically performed with an ultrasonic thickness gauge.

View Complete Details

Yes, I am interested!

Radiography Testing
Interested in this product?
Get Best Quote

Radiography Testing

Get Latest Price

Minimum Order Quantity: 1 Piece

ApplicationManufacturer
Testing TypeCracks
Process TypeWelding
Test LocationCustomer Place
Testing Result DurationLess Than 1 Hour
Testimonials FormatHardcopy
Standard Certification RequiredYes
Periodic Review RequiredYes

Industrial radiography is a method of non-destructive testing where many types of manufactured components can be examined to verify the internal structure and integrity of the specimen. Industrial Radiography can be performed utilizing either X-rays or gamma rays. Both are forms of electromagnetic radiation. The difference between various forms of electromagnetic energy is related to the wavelength. X and gamma rays have the shortest wavelength and this property leads to the ability to penetrate, travel through, and exit various materials such as carbon steel and other metals.

View Complete Details

Yes, I am interested!

Radiography Testing Services In Chennai
Interested in this product?
Get Best Quote

Radiography Testing Services In Chennai

Get Latest Price

Minimum Order Quantity: 1 Piece

ApplicationManufacturer
Testing TypeCracks
Process TypeWelding
Test LocationCustomer Place
Testing Result DurationLess Than 1 Hour
Testimonials FormatHardcopy
Standard Certification RequiredYes
Periodic Review RequiredYes

Industrial radiography is a method of non-destructive testing where many types of manufactured components can be examined to verify the internal structure and integrity of the specimen. Industrial Radiography can be performed utilizing either X-rays or gamma rays. Both are forms of electromagnetic radiation. The difference between various forms of electromagnetic energy is related to the wavelength. X and gamma rays have the shortest wavelength and this property leads to the ability to penetrate, travel through, and exit various materials such as carbon steel and other metals.

View Complete Details

Yes, I am interested!

Radiography Testing Services In India
Interested in this product?
Get Best Quote

Radiography Testing Services In India

Get Latest Price

Minimum Order Quantity: 1 Number

ApplicationResearch and Development
Testing TypeCracks
Process TypeWelding
Test LocationCustomer Place
Testing Result DurationLess Than 1 Hour
Testimonials FormatHardcopy
Standard Certification RequiredYes
Periodic Review RequiredYes

Industrial radiography is a method of non-destructive testing where many types of manufactured components can be examined to verify the internal structure and integrity of the specimen. Industrial Radiography can be performed utilizing either X-rays or gamma rays. Both are forms of electromagnetic radiation. The difference between various forms of electromagnetic energy is related to the wavelength. X and gamma rays have the shortest wavelength and this property leads to the ability to penetrate, travel through, and exit various materials such as carbon steel and other metals.

View Complete Details

Yes, I am interested!

Radiography Inspection
Interested in this product?
Get Best Quote

Radiography Inspection

Get Latest Price

Minimum Order Quantity: 1 Set

ApplicationManufacturer
Testing TypeCracks
Process TypeWelding
Test LocationCustomer Place
Testing Result DurationLess Than 1 Hour
Testimonials FormatHardcopy
Standard Certification RequiredYes

Industrial radiography is a method of non-destructive testing where many types of manufactured components can be examined to verify the internal structure and integrity of the specimen. Industrial Radiography can be performed utilizing either X-rays or gamma rays. Both are forms of electromagnetic radiation. The difference between various forms of electromagnetic energy is related to the wavelength. X and gamma rays have the shortest wavelength and this property leads to the ability to penetrate, travel through, and exit various materials such as carbon steel and other metals.

View Complete Details

Yes, I am interested!

PMI Testing Services
Interested in this product?
Get Best Quote

PMI Testing Services

Get Latest Price

Minimum Order Quantity: 1 Piece

Material TypeAutomotive Components
Mode of ReportHard Copy, Soft Copy
Test LocationCustomer Place
Value Data Report onMaterial Properties
Sampling AreaBy Samples in Lab
ApplicationProduction and Manufacturing
Application TypeIndustrial
Certification SchemePersonal Standard Certification
Training Course RequiredYes
Need Test Result<2 Hours
Need Standard CertificationYes

Positive Material Identification (PMI) is the analysis of a metallic alloy to establish composition by reading the quantities by percentage of its constituent elements. Typical methods for PMI include X-ray fluorescence (XRF) and optical emission spectrometry (OES).

View Complete Details

Yes, I am interested!

PMI Testing Services In India
Interested in this product?
Get Best Quote

PMI Testing Services In India

Get Latest Price

Minimum Order Quantity: 1 Piece

Mode of ReportHard Copy, Soft Copy
Test LocationCustomer Place
Value Data Report onMaterial Properties
ApplicationProduction and Manufacturing
Application TypeIndustrial
Certification SchemePersonal Standard Certification
Training Course RequiredYes
Need Test Result<2 Hours
Need Standard CertificationYes

Positive Material Identification (PMI) is the analysis of a metallic alloy to establish composition by reading the quantities by percentage of its constituent elements. Typical methods for PMI include X-ray fluorescence (XRF) and optical emission spectrometry (OES).

View Complete Details

Yes, I am interested!

Ultrasonic Thickness Gauging Services
Interested in this product?
Get Best Quote

Ultrasonic Thickness Gauging Services

Get Latest Price

Minimum Order Quantity: 1 Piece

Mode of ReportSoft Copy, Hard Copy
Product TypeTube
Test LocationCustomer Place
Need Test Result<2 Hours
Need Standard CertificationYes

UTG ultrasonic thickness measurement (UTM) is a method of performing non-destructive measurement (gauging) of the local thickness of a solid element (typically made of metal, if using ultrasound testing for industrial purposes) basing on the time taken by the ultrasound wave to return to the surface. This type of measurement is typically performed with an ultrasonic thickness gauge.

View Complete Details

Yes, I am interested!

Ultrasonic Thickness Gauging
Interested in this product?
Get Best Quote

Ultrasonic Thickness Gauging

Get Latest Price

Minimum Order Quantity: 1 Piece

MaterialStainless Steel

UTG ultrasonic thickness measurement (UTM) is a method of performing non-destructive measurement (gauging) of the local thickness of a solid element (typically made of metal, if using ultrasound testing for industrial purposes) basing on the time taken by the ultrasound wave to return to the surface. This type of measurement is typically performed with an ultrasonic thickness gauge.

View Complete Details

Yes, I am interested!

Vacuum Box Testing Services
  • Vacuum Box Testing Services
  • Vacuum Box Testing Services
Interested in this product?
Get Best Quote

Vacuum Box Testing Services

Get Latest Price

Minimum Order Quantity: 1 Piece

Watch Video

Testing Report MethodHardcopy, Mail, CD
Type of TestingPackage Testing, Welding/Angular Plate Test, Bubble Leak Testing
Place of TestingLaboratory
Other Criteria ChecksValve Test
Gauge/Pressure Testing RequiredYes
Physical Dimension Checking RequiredYes
Test Report RequiredYes
Need Annual Maintenance ServiceYes

Vacuum box testing is a non-destructive examination used when trying to locate weld seam leaks. A vacuum box and a compressor create a high or low pressure vacuum while a detergent solution is applied to the test area. The detergent bubbles, making leaks visible within the created pressure envelope.

View Complete Details

Yes, I am interested!

Vacuum Box Testing Services
  • Vacuum Box Testing Services
  • Vacuum Box Testing Services
Interested in this product?
Get Best Quote

Vacuum Box Testing Services

Get Latest Price

Minimum Order Quantity: 1 Piece

Watch Video

Testing Report Methodsoft copy, Hardcopy, Mail, CD
Type of TestingBubble Leak Testing, Package Testing, Welding/Angular Plate Test
Place of TestingField
Other Criteria ChecksValve Test
Gauge/Pressure Testing RequiredYes
Physical Dimension Checking RequiredYes
Test Report RequiredYes
Need Annual Maintenance ServiceYes

Vacuum box testing is a non-destructive examination used when trying to locate weld seam leaks. A vacuum box and a compressor create a high or low pressure vacuum while a detergent solution is applied to the test area. The detergent bubbles, making leaks visible within the created pressure envelope.

View Complete Details

Yes, I am interested!

Vacuum Box Inspection
  • Vacuum Box Inspection
  • Vacuum Box Inspection
Interested in this product?
Get Best Quote

Vacuum Box Inspection

Get Latest Price

Minimum Order Quantity: 1 Number

Watch Video

Testing Report MethodMail, Hardcopy
Type of TestingBubble Leak Testing, Welding/Angular Plate Test, Package Testing
Place of TestingField
Other Criteria ChecksValve Test
Gauge/Pressure Testing RequiredYes
Physical Dimension Checking RequiredYes
Test Report RequiredYes
Need Annual Maintenance ServiceYes

Vacuum box testing is a non-destructive examination used when trying to locate weld seam leaks. A vacuum box and a compressor create a high or low pressure vacuum while a detergent solution is applied to the test area. The detergent bubbles, making leaks visible within the created pressure envelope.

View Complete Details

Yes, I am interested!

Vacuum Box Inspection
  • Vacuum Box Inspection
  • Vacuum Box Inspection
Interested in this product?
Get Best Quote

Vacuum Box Inspection

Get Latest Price

Minimum Order Quantity: 1 Piece

Watch Video

Testing Report MethodCD, Hardcopy, Mail
Type of TestingBubble Leak Testing, Welding/Angular Plate Test, Package Testing
Place of TestingField
Other Criteria ChecksValve Test
Gauge/Pressure Testing RequiredYes
Physical Dimension Checking RequiredYes
Test Report RequiredYes
Need Annual Maintenance ServiceYes

Vacuum box testing is a non-destructive examination used when trying to locate weld seam leaks. A vacuum box and a compressor create a high or low pressure vacuum while a detergent solution is applied to the test area. The detergent bubbles, making leaks visible within the created pressure envelope.

View Complete Details

Yes, I am interested!

Hardness Testing Testing Services
Interested in this product?
Get Best Quote

Hardness Testing Testing Services

Get Latest Price

Minimum Order Quantity: 1 Piece

Load TypeStandard
Tester TypePortable Hardness Tester
Standards AdheredASTM
Product TypePlate
Usage/ApplicationHeat Treatment Unit
Material TypeBrass

The Leeb Rebound Hardness Test (LRHT) is one of the four most used methods for testing metal hardness. This portable method is mainly used for testing sufficiently large workpieces (mainly above 1 kg)

View Complete Details

Yes, I am interested!

Hardness Testing Testing Services
Interested in this product?
Get Best Quote

Hardness Testing Testing Services

Get Latest Price

Minimum Order Quantity: 1 Piece

Testing LocationOn-Site
Load TypeStandard
Tester TypePortable Hardness Tester
Standards AdheredISO
Product TypeCylinder Block
Usage/ApplicationFoundries
Material TypeAluminium

The Leeb Rebound Hardness Test (LRHT) is one of the four most used methods for testing metal hardness. This portable method is mainly used for testing sufficiently large workpieces (mainly above 1 kg)

View Complete Details

Yes, I am interested!

Radiography Inspection
Interested in this product?
Get Best Quote

Radiography Inspection

Get Latest Price

Minimum Order Quantity: 1 Piece

Is It PortablePortable
Peak Kilo Voltage125 kVp, 100 kVp
Current500 mA, 300 mA, 100 mA
ApplicationRadiography
Operation ModeAutomatic

Industrial radiography is a method of non-destructive testing where many types of manufactured components can be examined to verify the internal structure and integrity of the specimen. Industrial Radiography can be performed utilizing either X-rays or gamma rays. Both are forms of electromagnetic radiation. The difference between various forms of electromagnetic energy is related to the wavelength. X and gamma rays have the shortest wavelength and this property leads to the ability to penetrate, travel through, and exit various materials such as carbon steel and other metals.

View Complete Details

Yes, I am interested!

Metal Hardness Testing
Interested in this product?
Get Best Quote

Metal Hardness Testing

Get Latest Price

Minimum Order Quantity: 1 Piece

Automation GradeSemi-automatic

The Leeb Rebound Hardness Test (LRHT) is one of the four most used methods for testing metal hardness. This portable method is mainly used for testing sufficiently large workpieces (mainly above 1 kg)

View Complete Details

Yes, I am interested!
© PWHT Solutions Private Limited. All Rights Reserved (Terms of Use)