X

PWHT Solutions Private Limited

Porur, Chennai, Tamil Nadu

| GST  33AAICP2001K2ZR

is a member of IndiaMART

| Verified Supplier

|

★★★★★
★★★★★
View Mobile Number 82% Response Rate

Our Products

+View All

NDT Standard Test Block

Calibration Blocks, or ReferenceBlocks, should be used in every application tocalibratetest equipment and levels of sensitivity. We offer a full line of testblocksincluding standardblocksavailable for angle beam calibrations and thickness calibrations of common materials.

5 Step NDT Calibration Blocks
  • 5 Step NDT Calibration Blocks
  • 5 Step NDT Calibration Blocks
Interested in this product?
Get Best Quote

5 Step NDT Calibration Blocks

Rs 150 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

Watch Video

BrandPWHT
MaterialMild Steel
Frequency50-60 Hz
Voltage220-440v
Power SourceElectric

5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797

Additional Information:

  • Item Code: 7050-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

ASME Angle Beam Calibration Block
  • ASME Angle Beam Calibration Block
  • ASME Angle Beam Calibration Block
Interested in this product?
Get Best Quote

ASME Angle Beam Calibration Block

Rs 25 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

BrandPWHT
MaterialStainless Steel
FeaturesReliable
Length17 Inch
Width1.50 Inch

ASME Angle Beam Calibration Block For Pipe. Ready to request a quote for some blocks? Here's what we need... What is the pipe material? What is the pipe NPS / OD size? What is the pipe schedule / wall thickness? Is NDE supplying the material or will it be customer supplied? Are there any changes or modifications requested to the ASME block design? ASME Angle Beam Calibration Blocks contain (4) EDM notches (axial and circumferential on both OD and ID) at a depth of 8-11% of nominal wall thickness x 1/4" max wide (most notches are approximately .020-.030" wide) x 1.000" min long. Blocks 4" NPS and smaller are left at 360°, while blocks over 4" are milled to an 8" arc section. All blocks are 8" in axial length, or 8T, whichever is greater. Made in accordance with ASME Section V Article 4 Figure T-434.3. In small quantities, blocks can be shipped in approximately 1 week, with rush options always available. Larger quantities will take longer, however we're happy to do partial shipments.

Additional Information:

  • Item Code: 7078-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennaia
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

ASME Basic NDT Calibration Block
Interested in this product?
Get Best Quote

ASME Basic NDT Calibration Block

Rs 50 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

BrandPWHT
MaterialMild Steel
Frequency50-60 Hz
Voltage220-440v
Power SourceElectric

ASME Basic Calibration 1½ Block 1018 Steel ( long version) Geometry: long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

Additional Information:

  • Item Code: 7260-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

AWS Resolution NDT Calibration Blocks
Interested in this product?
Get Best Quote

AWS Resolution NDT Calibration Blocks

Rs 40 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

BrandPWHT
MaterialMild Steel
Frequency50-60 Hz
Voltage220-440v
Power SourceElectric

AWS-Resolution 304 Stainless AWS/ANSI Resolution Block RC - Resolution Reference Block Geometry:1 " x 3" x 6". Contains nine 0.062" diameter holes for 45, 60 and 70 degree transducers.

Additional Information:

  • Item Code: 7114-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

DS Block 304 Stainless Calibration Block
Interested in this product?
Get Best Quote

DS Block 304 Stainless Calibration Block

Rs 750 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

BrandPWHT
MaterialMild Steel
Frequency50-60 Hz
Voltage220-440v
Power SourceElectric

DS Block 304 Stainless AWS and ANSI Type DS calibration Block Geometry: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)

Additional Information:

  • Item Code: 7140-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

EDM Slot Sizing Block
Interested in this product?
Get Best Quote

EDM Slot Sizing Block

Rs 150 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

BrandPWHT
MaterialMild Steel
Frequency50-60 Hz
Voltage220-440v
Power SourceElectric

EDM Slot Sizing Block 7075-T6 Aluminum Geometry: contains nine EDM slots from 0.100" to 0.900" deep. Slot width is 0.011". Nominal depth is laser engraved on the side of the block. Dimensions: 1.000" x 1.000" x 10.000".

Additional Information:

  • Item Code: 7153-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

IIW V1 NDT Calibration Blocks
  • IIW V1 NDT Calibration Blocks
  • IIW V1 NDT Calibration Blocks
Interested in this product?
Get Best Quote

IIW V1 NDT Calibration Blocks

Rs 40 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

Watch Video

BrandPWHT
MaterialMild Steel
Frequency50-60 Hz
Voltage220-440v
Power SourceElectric

Used for calibration of shear and longitudinal transducers, and verification of shear wedge exit point and refracted angle. Can also be used for resolution and sensitivity checking. In accordance with: IIW (International Institute of Welding) and ASTM E164, Metric Block.
  • Dimensions: 25.0 mm x 100.0 mm x 300.0 mm
  • Features: 100.0 mm radius, 1.5 mm dia hole, 6.0 mm deep x 2.0 mm wide slot, and 25.0 mm radiussed slot x 1.5 mm deep x 3.0 mm wide.
  • Alloy: Type 304 Stainless Steel


Additional Information:

  • Item Code: 7162-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!
Navships Test Block
Interested in this product?
Get Best Quote

Navships Test Block

Rs 50 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

MaterialAluminum
BrandPWHT
ColorSilver
Surface FinishedPolished
Packaging TypeBox

Navships Test Block 7075-T6 Aluminum (inch Version) Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250". Used for distance amplitude correction, sensitivity levels and flaw depth information. In accordance with MIL-STD-271G Figure 9, and NAVSHIPS Specification 0900-006-3010/Section 6. Also known as a "Mare Island block.

Additional Information:

  • Item Code: 7205-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

PDI Alternative ASME Calibration Blocks
Interested in this product?
Get Best Quote

PDI Alternative ASME Calibration Blocks

Rs 40 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

BrandPWHT
MaterialMild Steel
Frequency50-60 Hz
Voltage220-440v
Power SourceElectric

PDI Alternative ASME Calibration Blocks (3 set Block). PDI Alternative ASME blocks are manufactured in accordance with the requirements of the Performance Demonstration Initiative (PDI) Procedure No. PDI-UT-1, Rev. C, Fig. 4 (Ferritic) and PDI-UT-2, Rev. C, Fig. 4 (Austenitic).

Additional Information:

  • Item Code: 7208-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: CHENNAI
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

V2 A4 Calibration Block BS 2704
Interested in this product?
Get Best Quote

V2 A4 Calibration Block BS 2704

Rs 50 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

BrandPWHT
MaterialStainless Steel
Product TypeCalibration Block
Surface FinishedPolished
Packaging TypeBox

Calibration Block No-2 25mm 304 Stainless Steel Geometry: 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 25.0mm. 25mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. In accordance with EN 27963, DIN 54-120, and ISO 7963.

Additional Information:

  • Item Code: 7246-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: CHENNAI
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

10 Step - 7075 Aluminum NDT UTG Calibration Block
  • 10 Step - 7075 Aluminum NDT UTG Calibration Block
  • 10 Step - 7075 Aluminum NDT UTG Calibration Block
Interested in this product?
Get Best Quote

10 Step - 7075 Aluminum NDT UTG Calibration Block

Rs 150 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

Watch Video

BrandPWHT
MaterialMS
FeaturesRust Proof
Packaging TypeBox
Surface FinishPolished

10 Step - 7075 Aluminum (Inch Version) 10 Step Calibration Block Inch Version: 3/4" square steps at thicknesses of 0.100" to 1.000" in .100" increments Inch Step Face: 3/4" x 3/4"

Additional Information:

  • Item Code: 7002-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: CHENNAI
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

ASME N-625 Reference Plate
Interested in this product?
Get Best Quote

ASME N-625 Reference Plate

Rs 500 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

BrandPWHT
MaterialSS
Packaging TypeBox
Surface FinishPolished
ShapeRectangle

3N-625 Reference Plate 7075-T6 Aluminum ( Metric Version) Geometry: Contains six flat-bottom holes.Also contains the calibration notch. In accordance with ASME 1275N Boiler and Pressure Vessel Code, Section III, Nuclear Vessels. Used for longitudinal, shear, and surface wave sensitivity calibrations.

Additional Information:

  • Item Code: 7080-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

4 Step Block 304 Stainless Steel - Metric Version A NDT Cali
  • 4 Step Block 304 Stainless Steel - Metric Version A NDT Cali
  • 4 Step Block 304 Stainless Steel - Metric Version A NDT Cali
Interested in this product?
Get Best Quote

4 Step Block 304 Stainless Steel - Metric Version A NDT Cali

Rs 150 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

Watch Video

BrandPWHT
MaterialStainless Steel
FeaturesReliable
Surface FinishedPolished

4-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .250", .500", .750" and 1.000". Metric Versions: Metric 4A (6.25, 12.5, 18.75 and 25 mm) Metric 4B (5.0, 10.0, 15.0 and 20 mm) Step Face: 3/4" x 3/4"-Spec: ASTM E797

Additional Information:

  • Item Code: 7029-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

90 Degree Curved 5-step NDT Calibration Block
Interested in this product?
Get Best Quote

90 Degree Curved 5-step NDT Calibration Block

Rs 150 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

BrandPWHT
MaterialSteel
FeaturesHigh Accuracy
Size12.5x43x75mm

90° Curved 5-Step Block 1018 Steel (Metric Version) For thickness and linearity calibration of curved surfaces Metric Version: This Metric Curved 5 Step block is machined from a solid 50.8mm diameter bar with step thicknesses of 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm. ID radius is a constant 12.7mm / 25.4mm diameter. Metrice Block Curvature: 12.5mm step has a 25.2mm radius,10.0mm step has a 22.7mm radius,7.5mm step has a 20.2mm radius,5.0mm step has a 17.7 radius,2.5mm step has a 15.2mm radius.Metric Step Face: 25mm x 90° arc.

Additional Information:

  • Item Code: 7074-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

Calibration Block No.1 (k1)
  • Calibration Block No.1 (k1)
  • Calibration Block No.1 (k1)
Interested in this product?
Get Best Quote

Calibration Block No.1 (k1)

Rs 150 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

Watch Video

BrandPWHT
MaterialSteel
FeaturesHigh Accuracy
Size12.5x43x75mm

For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. Our version of this block includes a 100mm radius, 3.0mm and 50.0mm holes, engraved reference mark scales, and two optional slots at the zero point which provide calibrating signals at intervals of 100mm range. In accordance with EN 12223 and ISO 2400.

This block is not to be confused with the older style "V1/5 (A2)" Block from BS 2704, which is similar but contains a 1.5mm through-hole rather than a 3.0mm hole. See our test block store for more information on this block.

• Dimensions: 300mm x 100mm x 25mm

Additional Information:

  • Item Code: 7117-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

Drilled Hole Sizing NDT Calibration Blocks
Interested in this product?
Get Best Quote

Drilled Hole Sizing NDT Calibration Blocks

Rs 175 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

BrandPWHT
MaterialSteel
FeaturesHigh Accuracy
Size12.5x43x75mm

Drilled Hole Sizing Block 1018 Steel Geometry: block contains (9) 1/16" diameter thru-holes located from 0.100" to 0.900" from the scanning surface.Dimensions: 1.000" x 1.000" x 10.000"

Additional Information:

  • Item Code: 7136-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

DSC NDT Calibration Block
Interested in this product?
Get Best Quote

DSC NDT Calibration Block

Rs 50 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

BrandPWHT
MaterialCarbon Steel
Surface FinishedPolished
Packaging TypeBox

DSC Block 1018 Carbon Steel (Metric Version) AWS type DSC Block Distance, sensitivity, refracted angle and beam index calibration for angle beam transducers, per AWS and ASHTO requirements. Geometry: 1 " thick, 4" long with 1" and 3" radius. Contains 3/8" deep x 1/32" radius notch and a 1/8" diameter side drilled hole for 45, 60 and 70 degree probes. Application:Calibration of transverse and longitudinal wave distance, setting determination of the sound beam point of incidence, angle of propagation and sensitivity.

Additional Information:

  • Item Code: 7145-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

Leeb Hardness Test Blocks HLD
Interested in this product?
Get Best Quote

Leeb Hardness Test Blocks HLD

Rs 75 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

ColorBlack
Product TypeTest Blocks
Packaging TypeBox
Surface FinishedPolished

Leeb Hardness Test Blocks are used for calibration the hardness testers according to Leeb method. Leeb hardness testing complies to DIN 50156 and ASTM A956. Leeb Hardness Test Block is produced of carbon or alloy steel, has one tested area (operating side) which has the required hardness. The tested area will have several indenter prints as factory final final calibration tests. Also, each calibration block has it’s identification number on its lateral surface. Measurement range: 530±40 HLD 630±40 HLD 790±40 HLD Dimensions : diameter : 88 mm height : 55 mm Weight :3 kg

Additional Information:

  • Item Code: 7456-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

ASTM Area Amplitude Block
Interested in this product?
Get Best Quote
BrandPWHT
MaterialStainless Steel
Course ModeOffline
FeaturesReliable
Length17 Inch
Thickness1.50 Inch

ASTM Area Amplitude Set of 8-304 Stainless ASTM E428 Area Amplitude Calibration Block, 304 Stainless, Set of 8. Geometry:Set of 8, contains the following hole diameters and metal travel distances: 1/64" - 3.0" (1-0300), 2/64" - 3.0" (2-0300), 3/64" - 3.0" (3-0300), 4/64" - 3.0" (4-0300), 5/64" - 3.0" (5-0300), 6/64" - 3.0" (6-0300), 7/64" - 3.0" (7-0300) and 8/64" - 3.0" (8-0300).

Additional Information:

  • Item Code: 7086-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

V1/5 Block 304
Interested in this product?
Get Best Quote

V1/5 Block 304

Rs 50 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

BrandPWHT
MaterialStainless Steel
Dimension300mm x 100mm x 25mm

V1/5 Block 304 Stainless Steel (A2) Geometry:100mm radius, 1.5mm and 50.0mm holes, engraved reference mark scales, and two optional slots at the zero point which provide calibrating signals at intervals of 100mm range. Dimensions: 300mm x 100mm x 25mm

Additional Information:

  • Item Code: 7244-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: CHENNAI
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. Our version of this block includes a 100mm radius, 1.5mm and 50.0mm holes, engraved reference mark scales, and two optional slots at the zero point which provide calibrating signals at intervals of 100mm range. In accordance with British Standard BS 2704 Block A2 Mod. 1, German Standard DIN 54-120, Australian Standard AS 2803, and ISO 2400. Also meets the requirements of the Dassault Aviation Falcon 10 Mandatory Service Bulletin #294 dated March 20, 2002. This block is not to be confused with the new EN 12223/ ISO 2400 Calibration Block No. 1 (also called the K1 block,) which is similar but contains a 3.0mm through-hole rather than a 1.5mm hole. See our test block store for this block. ¿¿¿ Dimensions: 300mm x 100mm x 25mm ¿¿¿ Made from Type 304 Stainless Steel.

View Complete Details

Yes, I am interested!

ASTM Distance/Area Amplitude Set of 10-4340 Steel NDT
Interested in this product?
Get Best Quote

ASTM Distance/Area Amplitude Set of 10-4340 Steel NDT

Rs 150 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

MaterialStainless Steel
BrandNde Tech

ASTM Distance/Area Amplitude Set of 10-4340 Steel ASTM E428 Area Amplitude Calibration Blocks, 4340 Steel, Set of 10. Geometry:Set of 10 Contains the following hole diameters and metal travel distances: 3/64" - 3.0" (3-0300), 5/64" - .12" (5-0012), 5/64" - .25" (5-0025), 5/64" - .50" (5-0050), 5/64" - .75" (5-0075), 5/64" - 1.5" (5-0150), 5/64" - 3.0" (5-0300), 5/64" - 6.0" (5-0600), 8/64" - 3.0" (8-0300) and 8/64" - 6.0" (8-0600).

Additional Information:

  • Item Code: 7096-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: CHENNAI
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

ASTM Distance/Area Amplitude Set, of 10-Titanium NDT
Interested in this product?
Get Best Quote

ASTM Distance/Area Amplitude Set, of 10-Titanium NDT

Rs 850 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

MaterialStainless Steel
BrandNde Tech

Basic set of ten flat-bottom hole blocks used to determine dead zone, sensitivity, distance and area amplitude linearity measurements. In accordance with ASTM E428. Includes our NIST traceable dimensional certification report, ultrasonic inspection report and two response plots from Tactic Inc, and the certified material test report. Note that we use a 5.0 MHz quartz transducer for block characterization as required by ASTM E127, Section 11. 
• Dimensions: 3/64” at 3.000” MTD; 5/64” at .125”, .250”, .500”, .750”, 1.500”, 3.000” and 6.000” MTD; and 8/64" at 3.000" and 6.000" MTD. Block diameter is 2.0".
• Made from Type 304 Stainless Steel.

Additional Information:

  • Item Code: 7098-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: CHENNAI
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

ASTM Distance Area Amplitude Calibration Blocks
Interested in this product?
Get Best Quote

ASTM Distance Area Amplitude Calibration Blocks

Rs 525 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

MaterialStainless Steel
BrandNde Tech

Basic set of ten flat-bottom hole blocks used to determine dead zone, sensitivity, distance and area amplitude linearity measurements. In accordance with ASTM E428. Includes our NIST traceable dimensional certification report, ultrasonic inspection report and two response plots from Tactic Inc, and the certified material test report. Note that we use a 5.0 MHz quartz transducer for block characterization as required by ASTM E127, Section 11. 
• Dimensions: 3/64” at 3.000” MTD; 5/64” at .125”, .250”, .500”, .750”, 1.500”, 3.000” and 6.000” MTD; and 8/64" at 3.000" and 6.000" MTD. Block diameter is 2.0".
• Made from 4340 Carbon Steel, Nickel-plated.

Additional Information:

  • Item Code: 7095-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

IOW Block 1018 Steel (Metric Version)
Interested in this product?
Get Best Quote

IOW Block 1018 Steel (Metric Version)

Rs 755 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

MaterialStainless Steel
BrandNde Tech

Used for beam profile measurement of angle beam transducers and measurement of transducer angles. Contains nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.
• Dimensions: 12" x 3" x 2"
• Made from titanium

Additional Information:

  • Item Code: 7171-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

ASTM Distance Area Amplitude Block
Interested in this product?
Get Best Quote

ASTM Distance Area Amplitude Block

Rs 150 / SetGet Latest Price

Minimum Order Quantity: 1 Set

MaterialStainless Steel
BrandNde Tech

Basic set of ten flat-bottom hole blocks used to determine dead zone, sensitivity, distance and area amplitude linearity measurements. In accordance with ASTM E127. Includes our NIST traceable dimensional certification report, ultrasonic inspection report and two response plots from Tactic Inc, and the certified material test report. Note that we use a 5.0 MHz quartz transducer for block characterization as required by ASTM E127, Section 11. 
• Dimensions: 3/64” at 3.000” MTD; 5/64” at .125”, .250”, .500”, .750”, 1.500”, 3.000” and 6.000” MTD; and 8/64" at 3.000" and 6.000" MTD. Block diameter is 2.0".
• Made from 7075-T6 Aluminum, black anodized.

Additional Information:

  • Item Code: 7097-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: CHENNAI
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

SC NDT Calibration Block
Interested in this product?
Get Best Quote

SC NDT Calibration Block

Get Latest Price

Minimum Order Quantity: 1 Piece

BrandPWHT
Material7075 Aluminum
Surface FinishedPolished
ColorSilver
Packaging TypeBox

SC Block 7075 Aluminum (Metric Version) AWS Type SC Calibration Block is Sensitivity Reference Block. Geometry:062" diameter through holes. 3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.

Additional Information:

  • Item Code: 7217-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: CHENNAI
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!
© PWHT Solutions Private Limited. All Rights Reserved (Terms of Use)