X

PWHT Solutions Private Limited

Porur, Chennai, Tamil Nadu

| GST  33AAICP2001K2ZR

is a member of IndiaMART

| Verified Supplier

|

★★★★★
★★★★★
View Mobile Number 82% Response Rate

Our Products

+View All

Paut & Tofd Standard Blocks

Service Provider of a wide range of services which include Paut- Notch Block, Paut-Phased Array Calibration Standard Block, Phased Array Calibration Blocks, Phased Array Calibration Block No 3 - 3/4, Paut- ASME Type Pipe Calibration Block and Phased Array Calibration Block No- 2 - 1.5.

Paut- Notch Block
Interested in this product?
Get Best Quote

Paut- Notch Block

Rs 150 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

BrandPWHT
Model7432
MaterialStainless Steel
Surface FinishedPolished
ColorSilver

PAUT-Notch Block 7075-T6 Aluminum (Inch Version) Geometry:The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000". Dimensions: 1.000" thick x 2.000" wide x 7.00" long. The Phased Array Calibration Standard Notch Block has been specially designed for use with Phased Array instruments used for sizing of OD and ID-connected cracks.

Additional Information:

  • Item Code: 7432-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: CHENNAI
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

Paut-Phased Array Calibration Standard Block
Interested in this product?
Get Best Quote

Paut-Phased Array Calibration Standard Block

Rs 50 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

MaterialStainless Steel
Model7434
BrandPWHT
Pakaging TypeBox
Product TypeCalibration Standard Block

PAUT-Phased Array Calibration Standard Block 1018 Steel (Inch Version) Geometry:The three radii (.500", 1.000" and 2.000") allow for exit point verification, velocity and sound path calculations. This block contains five holes at 3/64" diameter drilled through the 1.000" width, located at .100", .200", .400", .600", .800", 1.200", 1.400", 1.600", 1.800" and 1.900" from the respective scanning surface.Dimensions: 18.0" x 2.0" x 1.0" Phased Array Calibration Standard Blocks are used for angle beam verification, probe angle exit points, calibration for wedge delay, sensitivity and DAC/TCG for thicknesses up to 2".

Additional Information:

  • Item Code: 7434-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: CHENNAI
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

Phased Array Calibration Blocks
Interested in this product?
Get Best Quote

Phased Array Calibration Blocks

Rs 70 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

BrandPWHT
MaterialStainless Steel
Model7440
Product TypeCalibration Blocks
Packaging TypeBox

PAUT-Type A Block 1018 Steel (Inch Version) Geometry:4.000" and 2.000" radii 19 through holes at .040" diameter 1 through hole at .080" diameter 4 FBHs at .080" diameter x .080", .160", .235" and .315" deep. 4 FBHs at .157" diameter x .040", .120", .200" abd .275" deep. 3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius. 4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long. Dimensions: 1.000" thick x 4.000" tall x 12.00" long.

Additional Information:

  • Item Code: 7440-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: CHENNAI
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

Phased Array Calibration Block No 3 - 3/4
Interested in this product?
Get Best Quote

Phased Array Calibration Block No 3 - 3/4

Rs 50 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

MaterialStainless Steel
Model7445
BrandPWHT
Surface FinishedPolished
Packaging TypeBox

PAUT-Phased Array calibration block 1018 Steel ( ¾" Thick) ASME Sec V Art 4 Basic Calibration Block for non-piping applications, yet spaces the holes out on a longer, narrower block. The block contains two holes at 3/32" diameter drilled through the 1.500" width, located at 1/2T and 3/4T. This block is designed to reduce echo interference when performing a DAC/TCG calibration. The 1/2T hole is isolated from all other reflectors, while the 1/4T hole doubles as the 3/4T with the block inverted. A 150° angle has also been machined into the block ends to diminish corner reflections. As a result, the 1/2T hole signal is free of other reflection sources to sound path distances exceeding 6 inches.

Additional Information:

  • Item Code: 7445-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

Paut- ASME Type Pipe Calibration Block
Interested in this product?
Get Best Quote

Paut- ASME Type Pipe Calibration Block

Rs 150 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

BrandPWHT
Model7424
MaterialStainless Steeel
Surface FinishedPolished
ColorSilver

These pipe calibration blocks are specially designed to facilitate phased array UT (PAUT). The NDE block design includes various modifications to the original ASME design, including extra axial and arc length, a rearranged notch layout and a 10° angled cut on one end for blocks over 5" NPS. These modifications help to minimize unwanted "noise" from the backwall while performing DAC/TCG calibrations with phased array UT equipment. A calibration block should be a section of pipe of the same nominal size, schedule, heat treatment and material specifications as the material being examined. we maintains a large inventory of raw material for the machining of these standards and they can be made from customer supplied material as well. The Phased Array Pipe Calibration Block contains 4 EDM notches (axial and circumferential on both OD and ID) at a depth of 8-11% of nominal wall thickness x 1/4" maximum width (most notches are approximately .030" - .040" wide) x 1.000" minimum length. Blocks 5" NPS and smaller are left at 360°, while blocks over 5" are milled to a 180°/120°/90°/60° arc section (depending on nominal pipe size). All blocks are 12" in axial length minimum or 10T, whichever is greater. Made in accordance with ASME Section V Article 4 Figure T-43.3, with PAUT modification for PAUT.

View Complete Details

Yes, I am interested!

Phased Array Calibration Block No- 2 - 1.5
Interested in this product?
Get Best Quote

Phased Array Calibration Block No- 2 - 1.5

Rs 50 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

MaterialStainless Steeel
BrandPWHT
Model7448
ColorBlack
Storing PeriodPolished

PAUT-Phased Array calibration block 1018 Steel (1½" Thick,) ASME Sec V Art 4 Basic Calibration Block, yet spaces the holes out on a longer, narrower block. The block contains three holes at 1/8" diameter drilled through the 1.500" width, located at 1/4T, 1/2T, and 3/4T. It also contains two EDM notches at 2% deep x .010" wide x 1.500" long on opposite surfaces of one end. Dimensions: 1.50" thick x 1.50" wide x 17.00" long

Additional Information:

  • Item Code: 7448-for-more-details-log-on-to-www-ndtproduct-com
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per client requirement
  • Delivery Time: 2 to 3 days
  • Packaging Details: As per client requirement

View Complete Details

Yes, I am interested!

Block 7075-T6 Aluminum NDT UT Calibration Block
Interested in this product?
Get Best Quote

Block 7075-T6 Aluminum NDT UT Calibration Block

Rs 50 / PackGet Latest Price

Minimum Order Quantity: 1 Pack

BrandPWHT
MaterialStainless Steel
Surface FinishedPolished
Packaging TypeBox
Product TypeCalibration Block

  • Used for calibration of shear and longitudinal transducers, and verification of shear wedge exit point and refracted angle. Can also be used for resolution and sensitivity checking. In accordance with: IIW (International Institute of Welding) and ASTM E164, Metric Block.

    • Dimensions:  25.0 mm x 100.0 mm x 300.0 mm
    • Features:   100.0 mm radius, 1.5 mm dia hole, 6.0 mm deep x 2.0 mm wide slot, and 25.0 mm radiussed slot x 1.5 mm deep x 3.0 mm wide.
    • Alloy:   Please contact us for a quote. Blocks can be machined in Titanium alloys, Inconels and other Nickel alloys, Alloy Steels, Stainless Steels, Aluminums, Copper-Nickels, Brasses, Cast Irons, refractory alloys such as Molybdenum and Tungsten, and many more.


    Additional Information:

    • Item Code: 7166-for-more-details-log-on-to-www-ndtproduct-com
    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: CHENNAI
    • Production Capacity: As per client requirement
    • Delivery Time: 2 to 3 days
    • Packaging Details: As per client requirement

    View Complete Details

    Yes, I am interested!

    IIW-Type 1 Block 7075-T6 Aluminum NDT UT Calibration Block
    • IIW-Type 1 Block 7075-T6 Aluminum NDT UT Calibration Block
    • IIW-Type 1 Block 7075-T6 Aluminum NDT UT Calibration Block
    Interested in this product?
    Get Best Quote

    IIW-Type 1 Block 7075-T6 Aluminum NDT UT Calibration Block

    Rs 48 / PieceGet Latest Price

    Minimum Order Quantity: 1 Piece

    Watch Video

    BrandPWHT
    ColorSilver
    Surface FinishedPolished
    Product TypeCalibration Block
    Packaging TypeBox

    Used for calibration of shear and longitudinal transducers, and verification of shear wedge exit point and refracted angle. Can also be used for resolution and sensitivity checking.  In accordance with:  IIW (International Institute of Welding) and ASTM E164, U.S. Customary Block. 
    • Dimensions:  1.0" x 4.0" x 12.0"
    • Features:   4.0" radius, 2.0" and .060" diameter hole, .240" deep x .080" wide slot, and 1.0" radiussed slot x .060" deep x .120" wide.
    • Alloy:  1018 Steel, Nickel-plated


    Additional Information:

    • Item Code: 7167-for-more-details-log-on-to-www-ndtproduct-com
    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: CHENNAI
    • Production Capacity: As per client requirement
    • Delivery Time: 2 to 3 days
    • Packaging Details: As per client requirement

    View Complete Details

    Yes, I am interested!

    IOW Block 304 Stainless Steel NDT UT Calibration Block
    Interested in this product?
    Get Best Quote

    IOW Block 304 Stainless Steel NDT UT Calibration Block

    Rs 55 / PieceGet Latest Price

    Minimum Order Quantity: 1 Piece

    BrandPWHT
    MaterialStainless Steel
    Surface FinishedPolished
    Packaging TypeBox
    Product TypeCalibration Block

    Used for beam profile measurement of angle beam transducers and measurement of transducer angles. Contains nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.
    • Dimensions: 305mm x 75mm x 50mm
    • Made from stainless steel

    View Complete Details

    Yes, I am interested!

    Paut Navships Test Block
    Interested in this product?
    Get Best Quote

    Paut Navships Test Block

    Rs 50 / PieceGet Latest Price

    Minimum Order Quantity: 1 Piece

    MaterialStainless Steel
    BrandPWHT
    ColorSilver
    Surface FinishedPolished

    PAUT-Navships Test Block 1018 Steel(Metric Version) Geometry:The block contains four holes at 1.2mm diameter drilled through the 30mm width. The holes are located at 6.25mm (68.75mm), 18.75mm (56.25mm), 31.25mm, and 43.75mm. Dimensions: 30mm wide x 75mm tall x 300mm long. This special Phased Array version of the popular NAVSHIPS block solves the problem of too many holes interfering with one another.

    Additional Information:

    • Item Code: 7419-for-more-details-log-on-to-www-ndtproduct-com
    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: CHENNAI
    • Production Capacity: As per client requirement
    • Delivery Time: 2 to 3 days
    • Packaging Details: As per client requirement

    View Complete Details

    Yes, I am interested!

    IIW-Type 1 Block 1018 Steel  NDT UT Calibration Block
    • IIW-Type 1 Block 1018 Steel  NDT UT Calibration Block
    • IIW-Type 1 Block 1018 Steel  NDT UT Calibration Block
    Interested in this product?
    Get Best Quote

    IIW-Type 1 Block 1018 Steel NDT UT Calibration Block

    Rs 50 / PieceGet Latest Price

    Minimum Order Quantity: 1 Piece

    Watch Video

    BrandPWHT
    MaterialStainless Steel
    ColorSilver
    Surface FinishedPolished

    Used for calibration of shear and longitudinal transducers, and verification of shear wedge exit point and refracted angle. Can also be used for resolution and sensitivity checking. In accordance with: IIW (International Institute of Welding) and ASTM E164, Metric Block.
    • Dimensions:  25.0 mm x 100.0 mm x 300.0 mm
    • Features:   100.0 mm radius, 1.5 mm dia hole, 6.0 mm deep x 2.0 mm wide slot, and 25.0 mm radiussed slot x 1.5 mm deep x 3.0 mm wide.
    • Alloy:  Type 304 Stainless Steel

    View Complete Details

    Yes, I am interested!

    Astm E2491 Phased Array Assessment
    • Astm E2491 Phased Array Assessment
    • Astm E2491 Phased Array Assessment
    Interested in this product?
    Get Best Quote

    Astm E2491 Phased Array Assessment

    Rs 150 / PieceGet Latest Price

    Minimum Order Quantity: 1 Piece

    Watch Video

    BrandPWHT
    MaterialStainless Steeel
    Pakaging TypeBox
    Surface FinishedPolished

    PAUT-ASTM E2491 Phased Array Assessment Block 1018 Steel (Inch Version) Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1/16" (.0625) diameter Array of 18 holes on 1" radius at .040" diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Array of 18 holes on 2" radius at 5/64" (.0781) diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Vertical column of 16 holes at .040" diameter with .120" of separation between holes. Angled row of 12 holes at 1/16" (.0625) diameter with .200" of separation between holes. Machine engraved tick mark at radii centerline. Dimensions: 1" thick x 4" wide x 6" long.

    Additional Information:

    • Item Code: 7409
    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: CHENNAI
    • Production Capacity: As per client requirement
    • Delivery Time: 2 to 3 days
    • Packaging Details: As per client requirement

    View Complete Details

    Yes, I am interested!

    PAUT IIW ISO 19675 Block
    • PAUT IIW ISO 19675 Block
    • PAUT IIW ISO 19675 Block
    Interested in this product?
    Get Best Quote

    PAUT IIW ISO 19675 Block

    Rs 152 / PieceGet Latest Price

    Minimum Order Quantity: 1 Piece

    Watch Video

    ColorSilver
    Surface FinishedPolished
    MaterialStainless Steel
    Packaging TypeBox
    BrandPWHT

    PAUT IIW ISO 19675 Block 304 Stainless Steel (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.

    View Complete Details

    Yes, I am interested!
    © PWHT Solutions Private Limited. All Rights Reserved (Terms of Use)