X
View Mobile Number 74% Response Rate

Anti Corrosive Reinforcement Coating

Our range of products include Anti Corrosive CPCC Coating For TMT Bars and Epoxy Coating For TMT Bars (Epox 118).

Anti Corrosive CPCC Coating For TMT Bars
Interested in this product?
Get Best Quote

Anti Corrosive CPCC Coating For TMT Bars

Rs 185 / KgGet Latest Price

Minimum Order Quantity: 50 Kg

Product Brochure

MaterialLiquid
BrandRCC
Usage/Applicationconstruction
Packaging Size50 kgs
ApplicationIndustrial Use
Packaging Type50 kg drum
Colorgreen
Shelf Life1 year
Drying Time For Handling30 min
Mixing Ratio Base1:1 with cement
Country of OriginMade in India

Polyfix (Anti Corossive Rebar Coating Chemical) Polyfix is basically a polymer based coating that is specially formulated to protect steel from corrosion. Mild steel starts corroding when it is directly exposed to the atmosphere or when it comes in contact with water. Due to corrosion reduces the strength of steel making it unable to bear the designed loads. Therefore it is very important to prevent steel from corrosion. Steel can be prevented from corrosion if conditions around steel are maintained in the alkaline range. Polyfix is alkaline in nature and cement itself is alkaline in nature. Thus when this mixed slurry is applied on steel, it forms a permanent protective coating preventing any further corrosion. Application Procedure 1. First clean the steel surface of any loosely held particles scales by a wire brush/ sand papers. Swipe down the surface with a paint brush /cloth again. 2. Prepare slurry by mixing 1 Kg Polyfix and 1 Kg fresh cement into a lump free consistency. Add little water for painting consistency. Then apply this slurry on the surface by a paint brush. Note: Prepare adequate amount of material which can be used in 30 minutes. Packing : 5,25,50 kgs The information given is true to the best of our knowledge. They are offered in good faith but without guarantee as conditions and methods of use of all our products are beyond our control.



Additional Information:

  • Item Code: RCCPolyfix
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Delivery Time: 2-3 days
  • Packaging Details: Drum/Carbouy Packing

View Complete Details

Yes, I am interested!

  • Epoxy Coating For TMT Bars (Epox 118)
  • Epoxy Coating For TMT Bars (Epox 118)
  • Epoxy Coating For TMT Bars (Epox 118)
  • Epoxy Coating For TMT Bars (Epox 118)
  • Epoxy Coating For TMT Bars (Epox 118)
  • Epoxy Coating For TMT Bars (Epox 118)
  • Epoxy Coating For TMT Bars (Epox 118)
Epoxy Coating For TMT Bars (Epox 118)
Interested in this product?
Get Best Quote
Usage/ApplicationTMT Bars
Service LocationINDIA
Thickness200-300 microns
Coverage Areaapp 2 tons tmt bar in 20 ltr
BrandRCC
Packaging Size20 ltr (15+5)
TypeEpoxy
Grade StandardIndustrial Grade

EPOX-118
(Epoxy Coating ELASTOMERIC - an Anticorrosive Coating)
 INTRODUCTION :
EPOX - 118, is pigmented high solids two components Epoxy based [i.e. Resin & Hardner] air drying systems, specially formulated for Anti-corrosive coating in chemical Zones and coastal areas. It’s composition of Epoxy resin, Hardner, pigment paste & fillers for good Elastomeric, flow & wetting properties. The process of weighting odd quantities of Resin & Hardner is nearly eliminated ,hence the two components are mixed before application on 1:0.5 proportion by volume.
 
BASIC DATA :
  RATIO : Resin part 1.0 part by Vol. 1.0 part by Wt.
Hardener part 0.5 part by vol. 0.4 part by Wt.
  Viscosity of mix : 50 +/- 10 seconds
(by ford cup No.B4)
  Pot life of mix : 60 to 90 Minutes at 35`c temp.
  Coverage of mix : Mild steel 4-5 Sq.m./kg. with 100-120 microns 2 coats
Concrete 3-4 Sq.m./kg. with 120-150 microns 2 coats
  Coats Recommended : Two coats over prime coat at an interval of 24 hrs.
between the coats.
  Curing : Gets completed chemically cured at room temp with 5-7
Days.
  Visual Appearance : On completing curing GLOSSY.
  Shelf - life : Minimum 12 months stored at cool & dry place in sealed
containers supplied
  Shades available : Light Shades as: Yellow, Green : Bus green, Apple green,
 
SURFACE PREPARATION :
 For better adhesion, it is essential to clean the surface on which EPOX - 118 is to be applied. To remove dust dirt or loose particle by emery paper, wire brush or power tools. To get optimum performance the surface must be dry, free from oil grease and sufficiently roughened.
 FIELD OF APPLICATION :
 EPOX - 118 being excellent [Chemical Resistance] is suitable
systems for the corrosive chemical Industries to prevent the M S. Structures,TMT Bars from Acidic Fumes, TMT bars from rusting during monsoon, Dilute Acidic & Alkali’s.
For Chemical, We recommend EPOX-100, as prime coat due to good adhesion ability with M. S.Structures. And further more the same system coating can be applied to M.S. Grills of Residence & Hotels beside coastal Zones.
 
EPOX -118 being Flexible, Glossy and smooth finish is suitable
system for the FLOORING & WALLS of offices, pharmaceuticals,
garments, photofilms, texturing industries & even at Hotel & Residence. 
Packing : 10,20 kgs in MS drums 
The information given is true to the best of our  knowledge. They are offered in good faith but without guarantee as conditions and methods of use of all our products are beyond our control. Users are requested to determine the suitability of our material before adopting them on a commercial scale. 
 



Additional Information:

  • Delivery Time: 2 DAYS
  • Packaging Details: 20 Kgs Resin, 8 kg Hardener

View Complete Details

Yes, I am interested!

Get in touch with us

Reach Us

Radhekrishna Chemical CompanyRustomjee Ease Zone, Office No. 4054, 2nd Floor, Laxmi Singh Complex, Opposite Rustomjee Ozone Tower, Mulund Link Road, Malad West, Mumbai-400064, Maharashtra, India

Amit Singhania (Proprietor)

View Mobile Number74% Call Response Rate

Send SMS
Send Email
Send Payment
Leave a Message, we will call you back!
Send your enquiry to this supplier
I agree to the terms and privacy policy

We Accept Online Payments

All Rights Reserved (Terms of Use)