Radical Scientific Equipments Private Limited

Specifications

• General Purpose Bench Top Laboratory Centrifuge Machine.
• Heavy duty C.R.C. construction finished with powder coating.
• Double walled ABS injection moulded lid which is light weight to avoid accident.
• Inter lid lock and metallic centrifuge bowl for safety.
• Microprocessor based programmable speed control from 500 to 5200 r.p.m depending upon the type of rotor and Digital timer (0-59 minutes)
• 4 lines, 20 characters. LCD Display for set time, run time, set and run rpm, rcf.
• Last test parameter recall and display automatically on LCD.
• 50 programmes can be stored in memory and automatic rotor identification on display.
• Additional electronic lid lock which does not allow to open lid when machine is running and opens automatically after centrifuge time is over. Calibration window on lid.
• Dynamic brake (automatic) and imbalance detector are provided.
• Selection of 3 acceleration + 4 deceleration profile with fast spin option.

Rotor Heads available for this machine are following

• Swing Out 16x15ml. Max Speed on the head 4400 rpm
• Swing Out 12x15ml. Max Speed on the head 4400 rpm
• Swing Out 8x15ml. Max Speed on the head 5200 rpm
• Swing Out 6x50ml. Max Speed on the head 4000 rpm
• Swing Out 4x50ml. Max Speed on the head 4400 rpm
• Angle Heads 16x15ml. Max Speed on the head 5250 rpm
• Angle Heads 12x15ml. Max Speed on the head 5250 rpm
• Angle Heads 8x15ml. Max Speed on the head 5250 rpm
• Angle Heads 6x50ml. Max Speed on the head 5250 rpm
• Angle Heads 4x50ml. Max Speed on the head 5250 rpm
• Angle Heads 4x100ml. Max Speed on the head 4000 rpm
• Angle Heads 24x15ml. Max Speed on the head 4000 rpm
• Angle Head 24 Vacuutainers. Max Speed on the head 4000 rpm
• Angle Heads 32 tube of 12x75 mm Max Speed on the head 4000 rpm
• Angle Heads 12x100 mm of Borosil for serum separation Max Speed on the head 4000 rpm

Features

• The lid is light in weight to avoid accident due to heavy weight metallic lids during operations
• Very stable and low noise
• No vibrations
• Motor fitted on anti vibration spring pads. Supported with rubber covering from inside and outside.

Applications

• Compact Laboratory Centrifuge Machine, Microprocessor based, digital.
• Body made of rust proof ABS Plastic injection moulding with metallic protection bowl.
• Lid lock for safe drive.
• Equipped with 0-59 minute timer.
• 2 lines of 16 character LCD display of r.p.m., R.c.f, for set and run time.
• Programmable speed regulator from 500 to 4400 rpm in interval of 100 rpm.
• Last test parameter recall and displays automatically on LCD

Additional Information:

• Item Code: RST-4M
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Ex-works, Ambala

High Speed Universal Centrifuge Machine 20000 R.P.M. RST-24

Features

• Rotor Head are manufactured from speed grade aluminum which can withstand high speed.
• Very stable
• No vibrations
• Motor fitted on anti vibration springs supported with rubber covering from inside and out side.
• Fast spin option

Specifications

• High speed, high volume bench top, Laboratory Centrifuge Machine, Microprocessor based.
• Heavy duty C.R.C. construction finished with powder coating
• Stainless Steel centrifugal bowl for extra protection and easy cleaning.
• Fitted with well balanced universal motor (with carbons), digital timer 0-59 minuts
• 4 lines 20 characters LCD display for set time, run time, set and run rpm, rcf and rotor identification.
• 50 programmes can be stored in memory and automatic rotor identification on display.
• Additional electronic lid lock who does not allow to open lid when machine is running and opens automatically after centrifuge time is over.
• Dynamic brake (automatic) and imbalance detector are provided.
• Selection of 3 acceleration + 4 deceleration profile.
• Programmable Speed Regulator from 2000 to 20000 in interval of 100 rpm
• Last test parameter recall and displays automatically on LCD
• Supply completed with instruction manual, cord & plug to work on 220 volts 50Hz A.C.
• Machine comes without rotor heads.

Rotor Heads available for this machine are following

• Angle Head 12x1.5ml. Max Speed on the head 20000 rpm
• Angle Head 36 x 15 ml Max Speed on the head 6900 rpm
• Angle Head 8 x 15 ml Max Speed on the head 15400 rpm
• Angle Head 12 x 15 ml Max Speed on the head 12300 rpm
• Angle Head 8 x 25 ml Max Speed on the head 12500 rpm
• Angle Head 6 x 50 ml Max Speed on the head 12100 rpm
• Angle Head 8 x 50 ml Max Speed on the head 10800 rpm
• Angle Head 4 x 100 ml Max Speed on the head 11000 rpm
• Angle Head 8 x 100 ml Max Speed on the head 6900 rpm
• Angle Head 6 x 200 ml Max Speed on the head 6900 rpm
• Angle Head 6 x 25 ml Max Speed on the head 14100 rpm
• Angle Head 6 strips of 8x0.2ml Max Speed on the head 11000 rpm
• Angle Head 4 x 250 ml Max Speed on the head 6900 rpm

• 4x5ml tubes
• 6x15ml tubes
• 8x15ml tubes

Features

• Rotor Head are manufactured from special grade aluminum which can withstand high speed.
• Very stable
• No vibrations
• Motor fitted on anti vibration springs supported with rubber covering from inside and outside.

Specifications

• High speed, bench top, Micro Centrifuge Machine, Microprocessor based
• Heavy duty C.R.C. construction finished with powder coating
• Stainless Steel centrifugal bowl for extra protection and easy cleaning.
• Fitted with well balanced brushless motor with electronic drive.
• 4 lines, 20 characters. LCD Display for set time, run time, set and run rpm, rcf and rotor Identification. Timer os 0-59 minutes.
• 50 programmes can be stored in memory and automatic rotor identification on display.
• Additional electronic lid lock who does not allow to open lid when machine is running and opens automatically after centrifuge time is over.
• Dynamic brake (automatic) and imbalance detector are provided.

Rotor Heads available for this machine are following

• Angle Rotor 12x1.5/2ml Max Speed on the head 20000 rpm
• Angle Rotor 24 x 1.5/2 ml Max Speed on the head 16000 rpm
• Angle Rotor 8 x 5 ml Max Speed on the head 16000 rpm

Features

• The lid is light in weight to avoid accident due to heavy weight metallic lids during operations
• Very stable and low noise
• No vibrations
• Motor fitted on anti vibration springs supported with rubber covering from inside and outside.

Specifications

• Bench Top High Speed Centrifuge Machine
• Microprocessor based with digital timer 0 -59 minutes.
• Heavy duty C.R.C. construction finished with powder coating
• Metallic centrifugal bowl for extra protection and easy cleaning.
• Fitted with well balanced universal motor (with carbons)
• 2 lines of 16 character LCD display of r.p.m., Set time and run time
• Programmable Speed controller from 2000 to 10000 in variation of 100 rpm
• Last test parameter recall and displays automatically on LCD
• Lid lock for safe drive
• Rotors made of Aluminum Alloy to withstand high speed of 10000 rpm 4 Max.

Rotor Heads available for this machine are following

• Angle Head 12 x 1.5/2ml
• Angle Head 24 x 1.5/2ml
• Angle Rotor 8 x 5 ml
• Angle Rotor 8 x 15 ml
• Angle Head 4 x 25ml
• Angle Rotor 4 x 50 ml

Features

• Table Top
• Stainless steel centrifuge bowl of 304 quality
• Very stable
• low noise
• No vibration
• Elegant design
• High Quality
• High Performance

Specifications

• Heavy duty C.R.C. construction finished with powder coating
• Fitted with brushless automatic balanced motor
• Microprocessor based, 4 lines, 20 characters. LCD Display of set time, run time, set and run rpm, rcf. Equipped with 0-99 minute timer.
• Programmable speed regulator to control speed from 500 to 6000 r.p.m depending upon the type of rotor & Fast spin option.
• 50 programmes can be stored in memory.
• Automatic rotor identification on display.
• Additional electronic lid lock which does not allow to open lid when machine is running.
• Dynamic brake (automatic) and imbalance detector are provided.
• Selection of 3 acceleration + 4 deceleration profile. 4 Max.

Rotor Heads available for this machine are following

• Swing bucket Rotor 32 x 15 ml. Max Speed on the head 4000 rpm
• Angle rotor 36 x 15 ml Max Speed on the head 4000 rpm
• Swing Bucket Rotor 48 x 7 ml. Max Speed on the head 4000 rpm
• Swing Bucket Rotor 48 x Vacuutainers Max Speed on the head 4000 rpm
• Angle Bucket Rotor 4 x 100 ml. Max Speed on the head 5000 rpm

Serum Centrifuge Microprocessor Based, Digital Model No. RST-3BLD

• Brush less AC motor - (without carbons). (No need to change the carbons as required in other Centrifuges)
• Very stable
• Low in noise
• Corrosion free Structure
• Low cost repair if require

Applications:

• The best model for clinical, Pathological, Biochemistry Labs to separate blood serum
• It is also most suitable for I.V.F. labs where low speed is recommended.

Rotors available for this machine are following:

• Swing out: 8x15ml
• Swing out: 16 x vacuutainers
• Swing out: 16 x 12 x 75mm / 12x100mm borosil tubes 12 x 15ml
• Angle: 12 x 15ml.

• The lid is light in weight to avoid accident due to heavy weight metallic lids during operations
• Very stable and low noise
• No vibrations
• Motor fitted on anti vibration spring pads. Supported with rubber covering from inside and outside.

Applications

• Compact Laboratory Centrifuge Machine, Microprocessor based, digital.
• Body made of rust proof ABS Plastic injection moulding with metallic protection bowl.
• Lid lock for safe drive.
• Equipped with 0-59 minute timer.
• 4 lines of 16 character LCD display of r.p.m., R.c.f, for set and run time.
• Programmable speed regulator from 500 to 4400 rpm in interval of 100 rpm.
• Last test parameter recall and displays automatically on LCD

Rotor Heads available for this machine are following

• Swing out 8x15ml
• Swing out 16 x vacuutainers
• Swing out 16 x 12x75mm / 12x100mm borosil tubes
• Angle 12 x 15ml.

Additional Information:

• Item Code: RDC-8
• Production Capacity: 50 pcs per month
• Delivery Time: one week
• Packaging Details: cardboard box

• 1000 50
• 2000 223
• 3000 503
• 4000 894
• 5000 1396
• 6000 2011
• 7000 2737
• 7000 3575
• 9000 4524
• 10000 5585

Lab. Centrifuge Machine 20000 R.P.M. RST-24BL

Features

• Rotor Head are manufactured from speed grade aluminum which can withstand high speed.
• Very stable
• No vibrations
• Motor fitted on anti vibration springs supported with rubber covering from inside and outside.

Specifications

• High speed, high capacity bench top, Laboratory Centrifuge Machine, Microprocessor based
• Heavy duty C.R.C. construction finished with powder coating
• Stainless Steel centrifugal bowl for extra protection and easy cleaning.
• Fitted with well balanced brushless motor with electronic drive. Digital timer 0-99 minutes.
• 4 lines 20 characters LCD display for set time, run time, set & run rpm, rcf and rotor identification.
• 50 programmes can be stored in memory and automatic rotor identification on display.
• Additional electronic lid lock who does not allow to open lid when machine is running and opens automatically after centrifuge time is over.
• Dynamic brake (automatic) and imbalance detector are provided.
• Fast spin option.
• Selection of 3 acceleration + 4 deceleration profile.
• Programmable Speed Regulator from 2000 to 20000 in interval of 100 rpm
• Last test parameter recall and displays automatically on LCD
• Supply completed with instruction manual, cord & plug to work on 220 volts 50Hz A.C.
• Machine comes without rotor heads.
• ze 100 ml. O

Rotor Heads available for this machine are following

• Angle Head 12x1.5/2ml Max Speed on the head 20000 rpm
• Angle Head 24 x 1.5 ml Max Speed on the head 16000 rpm
• Angle Head 12 x 15 ml Max Speed on the head 16000 rpm
• Angle Head 8 x 25 ml Max Speed on the head 16000 rpm
• Angle Head 6 x 50 ml Max Speed on the head 16000 rpm
• Angle Head 4 x 100 ml Max Speed on the head 14500 rpm

Features:

• Microprocessor based
• Motor remain cool even after running full time
• Motor fitted on anti vibration springs supported with rubber covering from inside and outside.
• Low sound, very stable

Specifications:

• High speed Micro Centrifuge Max. R.P.M. 16000 and r.c.f 16600
• Heavy duty plastic injection moulded body.
• Stainless Steel protection bowl.
• Fitted with well balance universal motor having long life with imported carbons.
• 2 lines of 16 character LCD display of r.p.m., R.c.f, timer 0-59 minutes Display of set and run time
• Digital timer which can be set from 0-99 minutes in interval of 1 minute.
• Programmable Speed Regulator from 2000 to 16000 in variation of 100 rpm
• Last test parameter recall and displays automatically on LCD Supply

Serum Centrifuge Microprocessor Based, Digital Model No. RST-3BLD

Features

• Brushless without carbon
• Microprocessor based
• Fitted with anti vibration pads
• Motor remain cool even after running full time
• See through acrylic lid

Accessories

• Micro Hematocrit rotor to accommodate 24 capillaries of
• 75mm x 1mm or 12 capillaries.
• Rotor cover made of polycarbonate.
• Heparinised capillary tubes 75mm long x 1mm bore(Pack of 100 Nos.)
• Non-Heparinised capillary tubes 75mm long x 1mm bore (Pack of 100 Nos.)
• Reading device.
• Sealing wax- 1 tray

Hematocrit Centrifuge Model No. RST-15

Special Features

• Microprocessor based
• Fitted with anti vibration pads
• Motor remain cool even after running full time
• See through acrylic lid

Specifications

• Haematocrit Centrifuge Machine, Max. speed 13000 r.p.m.
• Compact body which is made of plastic injection moulded.
• Inner safety bowl made of stainless steel
• Fitted with well balance universal motor having long life with high grade carbons.
• 2 lines of 16 character LCD Display of r.p.m., r.c.f., set and run time.
• Last test parameter recall and displays automatically on LCD.
• Microprocessor based Digital timer of range 0-99 min.
• Preset speed controls thru microprocessor from 2000 to 13000 r.p.m. in interval of 100 rpm

Supply Completed with following Accesories

• Micro Hematocrit rotor to accommodate 24 capillaries of
• 75mm x 1mm or 12 capillaries.
• Rotor cover made of polycarbonate.
• Heparinised capillary tubes 75mm long x 1mm bore(Pack of 100 Nos.)
• Non-Heparinised capillary tubes 75mm long x 1mm bore (Pack of 100 Nos.)
• Reading device.
• Sealing wax- 1 tray

Features:

• Microprocessor based
• Fitted with anti vibration pads
• Motor remain cool even after running full time
• See through acrylic lid