Radical Scientific Equipments Private Limited

Voltage (V)	220 V
Frequency (Hz)	50 Hz
Phase	Three Phase
Power Source	Electric
Brand	Radical
Material	Stainless Steel

The Disc Polishing Machines are extensively used for polishing the Metallography Samples for Microscopic observation to study various metal structures. Disc Polishing Machines are finely polished to ensure smooth, scratch free and mirror like appearance that enable accurate metallographic interpretation.
Polishing is the final stage in producing a surface that is flat , smooth , scratch- free and mirror like in appearance. Such a surface is necessary for subsequent accurate metallographic interpretation, both qualitative & quantitative. In this Machine the drive is given the motor spindle, which is mounted on the motor shaft through friction mechanism. Polishing discs are fitted on the shaft and locked by nut. Shaft has two bearings, which are fitted into bearing holder for smooth working.

Brand	Radical
Power Source	Electric
Power Consumption	440 W
Phase	Three Phase
Voltage	220 - 380 V

Belt Polishers : For flat, Coarse grinding prior to fine grinding. The specimens to be ground in 60, 80 or 120 grit after cutting operation or moulding to remove surface imperfections. Useful step to remove light metallurgical damage in the specimen surface induced during cut-off operation.

Brand	Radical
Power Source	Electric
Power	1 HP
Voltage	220 V
Frequency	50 Hz
Temperature	0-300 degree C

A Set Consists of 23 Standard Samples Which Covers The Entire Range I.E.
Complete information including chemical composition, mechanical treatment, details of heat treatment, type of Etchant with description of Microstructure along with their coloured photographs are provided in a booklet. These sets are supplied in a wooden storing box with silica gel.

Additional Information:

• Item Code: MM-21
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Ex-works, Ambala

Voltage (V)	220 V
Frequency (Hz)	50 Hz
Phase	Three Phase
Power Source	Electric
Brand	Radical
Rotating Speed	1400 rpm
Working Disc Diameter	200 mm

Cabinet Type polishing machine adopt cabinet structure, mainly used to polish the all kinds of solid products,metal or no-metal specimen.It has the advantages of stable transmission,low noise, easy operation and convenient maintenance, can afford a variety of materials polishing requirement.

Voltage (V)	220 V
Frequency (Hz)	50 Hz
Weight (kg)	50 kg
Dimensions	725x710x310 mm
Rotate Speed	50-600 rpm
Polishing Disc Diameter	203 mm

This polishing machine is a double-disc desktop, applicable to rough grinding and polishing of metallographic sample. The machine has microprocessor control system, with a speed of 50-600rpm. The machine is an indispensable equipment in making the metallographic sample. The machine has a cooling device to cool the sample during grinding and polishing, thus preventing the damage of the metallographic structure caused by overheat of the sample. The machine, easy to use, safe and reliable, is an ideal preparation equipment for the labs of plants, research institutes and universities and colleges etc.

Voltage (V)	220 V
Frequency (Hz)	50 Hz
Weight (kg)	30.00 kg
Phase	Single Phase
Dimensions	740x400x310 mm
Input Power	250 W

Suitable for pre grinding, grinding and polishing metallographic specimens. Since the machine is speed-adjusted by microprocessor, it can run at a revolution of 50 to 1000 rpm, which favors the machine with wide applications. The machine is equipped with cooling system that can cool down the specimen during pre grindings and prevent overheating and damage the metallographic structure.

Featuring easy operation and reliable performance, it is an indispensable device for the factories, research institutions and college labs to prepare metallographic specimen.

Power (HP)	0.25 HP
Speed (RPM)	400 rpm
Voltage (V)	220 V
Disc Diameter (Inch)	200 mm
Frequency (Hz)	50 Hz
Material	Metal

The Disc Polishing Machines are extensively used for polishing the Metallography Samples for Microscopic observation to study various metal structures. Disc Polishing Machines are finely polished to ensure smooth, scratch free and mirror like appearance that enable accurate metallographic interpretation.
Polishing is the final stage in producing a surface that is flat , smooth , scratch- free and mirror like in appearance. Such a surface is necessary for subsequent accurate metallographic interpretation, both qualitative & quantitative. In this Machine the drive is given the motor spindle, which is mounted on the motor shaft through friction mechanism. Polishing discs are fitted on the shaft and locked by nut. Shaft has two bearings, which are fitted into bearing holder for smooth working.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Speed (RPM)	50-1400 rpm
Voltage (V)	220 V
Frequency (Hz)	50 Hz
Phase	Three Phase
Power Source	Electric
Brand	Radical

The Disc Polishing Machines are extensively used for polishing the Metallography Samples for Microscopic observation to study various metal structures. Disc Polishing Machines are finely polished to ensure smooth, scratch free and mirror like appearance that enable accurate metallographic interpretation.

Polishing is the final stage in producing a surface that is flat , smooth , scratch- free and mirror like in appearance. Such a surface is necessary for subsequent accurate metallographic interpretation, both qualitative & quantitative. In this Machine the drive is given the motor spindle, which is mounted on the motor shaft through friction mechanism. Polishing discs are fitted on the shaft and locked by nut. Shaft has two bearings, which are fitted into bearing holder for smooth working.

Power (HP)	20 HP
Speed (RPM)	1400 RPM
Voltage (V)	220 V
Frequency (Hz)	50 Hz
Phase	Three Phase
Power Source	Electric

The Disc Polishing Machines are extensively used for polishing the Metallography Samples for Microscopic observation to study various metal structures. Disc Polishing Machines are finely polished to ensure smooth, scratch free and mirror like appearance that enable accurate metallographic interpretation.
Polishing is the final stage in producing a surface that is flat , smooth , scratch- free and mirror like in appearance. Such a surface is necessary for subsequent accurate metallographic interpretation, both qualitative & quantitative. In this Machine the drive is given the motor spindle, which is mounted on the motor shaft through friction mechanism. Polishing discs are fitted on the shaft and locked by nut. Shaft has two bearings, which are fitted into bearing holder for smooth working.

Voltage (V)	230 V
Frequency (Hz)	50 Hz
Phase	Three Phase
Power Source	Electric
Brand	Radical

The Disc Polishing Machines are extensively used for polishing the Metallography Samples for Microscopic observation to study various metal structures. Disc Polishing Machines are finely polished to ensure smooth, scratch free and mirror like appearance that enable accurate metallographic interpretation.

Polishing is the final stage in producing a surface that is flat , smooth , scratch- free and mirror like in appearance. Such a surface is necessary for subsequent accurate metallographic interpretation, both qualitative & quantitative. In this Machine the drive is given the motor spindle, which is mounted on the motor shaft through friction mechanism. Polishing discs are fitted on the shaft and locked by nut. Shaft has two bearings, which are fitted into bearing holder for smooth working.

Voltage (V)	220 V
Frequency (Hz)	50 Hz
Phase	Single Phase
Dimensions	740x400x310 mm
Step Less Speed	50-1000 rpm

Metallographic specimen grinding & polishing machine Model RPMS-1B-MPT is equipped with single disc automatic Head and features step less speed changing grinding and polishing. The rotating speed of grinding and polishing disc is adjustable from 50 to 1000 rpm. Polishing and grinding head is designed according to investigation and researches on the market and customers' requirements.

MPT can prepare one, two or three samples at one time. It is easy-to-use, and the quality of finished sample is high. It can realize the whole process of rough grinding, fine grinding, rough polishing and finishing polishing for specimen preparing. This machine features easy operation and economical applying. It is the ideal specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.

Automation Grade	Manual
Model Name/Number	RHM-25
Brand	Radical
Finishing	Power coated
Material	Alu.Die Casting
Mould Size	25mm dia
Operation Mode	Manual
Phase	Single Phase
Voltage	220V
Mould Diameter	25 mm
Heater Power	750 Watts
Thermocouple	1 No
Temperature Range	0-300 deg C

Hot Mounting Press is designed user friendly for efficient and quality production of the specimen mounts. The Press has rigid construction complete enclosed body and elegant look. Design of the heater, operation ease, good quality hydraulic integrated jack. One can produce absolutely consolidated embedded single specimen mount with good finish, out of this mounting press. This machine has manual operation with lever.

Brand	Radical
Dimensions	615x510x500 cm
Net Weight	110 kg
Heat Preserving Time	0-99 m-99 s
Temperature Setting Range	0-300 deg C
Max Power	1800 W
Voltage	220 V

Automatic metallographic specimen mounting presses a kind of full automatic mounting press, equipped with in-out water cooling system. It is suitable for the heat mounting (thermo hardening & thermoplastic) for all kinds of materials. After the parameters such as heating temperature, heat preserving time and applied force etc. are set up, put the specimen and mounting material into the machine, close the cover and press the start button, then the machine will finish the job automatically. It is not necessary for the operator to be on duty. According to different requirment of the material, there are four kind of moulds that can be chosen to meet the demands as per requirement.

Brand	Radical
Mould Diameter	30 mm
Heat Power	800 W
Temperature Adjustment Range	0-400 deg C
Phase	Single Phase
Voltage	220 V

Metallographic inlaying machine is is suitable for cutting general metallography and lithofacies material specimens. This machine features safety & reliable performance, low noise and easy operation. It is the ideal instrument for specimen preparing purpose used in colleges, laboratories and factories.