Rapid Automation Sales And Services

We provide expert repair services for industrial controller keypads and display units, ensuring fast turnaround and reliable performance. Our team specializes in restoring damaged, non-responsive, and faulty interface systems used in automation industries.

• Non-responsive keypad repair
• Membrane keypad replacement
• Button malfunction troubleshooting
• Complete keypad refurbishment

• LCD / LED display repair
• Touchscreen panel replacement
• Backlight issue fixing
• Dead pixel & screen damage repair

• HMI keypad/display repair
• PLC controller display units
• Operator interface panel servicing

• Industrial HMI panels
• PLC controller units
• CNC machine controllers
• VFD control keypads
• Process control systems

• Keypad not working or partially working
• Display blank / flickering
• Touch not responding
• Broken or cracked screen
• Backlight failure

• ✔ Experienced technicians
• ✔ Fast turnaround time
• ✔ Cost-effective solutions
• ✔ Genuine spare parts
• ✔ On-site & off-site support

1. Fault diagnosis
2. Quotation approval
3. Repair / replacement
4. Testing & quality check
5. Delivery / installation

An AC Variable Frequency Drive (VFD) controls the speed and torque of AC motors by varying frequency and voltage. It’s widely used in pumps, conveyors, compressors, HVAC systems, and CNC machines.

VFD repairing includes:

• Fault diagnosis
• Power & control section repair
• Replacement of damaged components
• Testing under load conditions

Goal: restore drive performance and avoid production downtime

Typical issues you’ll encounter in the field:

• ❌ Drive not powering ON
• ❌ Overvoltage / undervoltage trip
• ❌ Overcurrent / short circuit fault
• ❌ IGBT module failure
• ❌ Capacitor bulging or failure
• ❌ Cooling fan not working (overheating)
• ❌ Control PCB fault
• ❌ Communication errors (Modbus/Profibus)
• ❌ Motor not running / speed fluctuation

• Check input supply (R-Y-B voltage)
• Visual inspection (burn marks, smell, dust)
• Check fault codes on display

• Rectifier (diode bridge) test
• DC bus voltage check
• IGBT module testing
• Capacitor health check

• PCB inspection
• Gate driver signals
• Feedback & control signals

• Replace IGBT / capacitors / fan
• Repair or replace control board
• Tighten terminals & wiring

• Blow dust with air
• Clean heat sinks
• Check cooling system

• No-load testing
• Motor trial run
• Parameter setting & tuning

• Siemens (Micromaster / Sinamics)
• ABB (ACS series)
• Danfoss
• Schneider Electric (Altivar)
• Delta
• Mitsubishi
• Yaskawa
• Control Techniques

• ✔ On-site VFD troubleshooting
• ✔ Emergency breakdown service
• ✔ Panel inspection & wiring correction
• ✔ Parameter backup & restoration
• ✔ Retrofitting & upgrading
• ✔ AMC (Annual Maintenance Contract)

• �� Always discharge DC bus capacitors before working
• �� Check DC bus voltage (~300–600V DC) carefully
• �� Replace cooling fans periodically (major failure cause)
• �� Keep proper earthing & shielding to avoid noise faults
• �� Use correct motor cable (VFD grade)

��=120����N=P120f​

Where:

• N = Motor speed (RPM)
• f = Frequency (Hz)
• P = Number of poles

➡️ This is how VFD controls motor speed by changing frequency.

We can help you with:

• �� VFD troubleshooting checklist (site use)
• �� Service report format (professional)
• �� Nearby VFD repair service
• �� Step-by-step fault finding for your specific model

Just tell me ��

We specialize in professional Soft Starter Repairing, Maintenance, and On-Site Service for all major industrial applications. Our expert engineers ensure quick diagnosis, reliable repair, and minimal downtime for your operations.

• All brands Soft Starter Repair
• Fault Diagnosis & Troubleshooting
• PCB Repair / Replacement
• SCR / Thyristor Testing & Replacement
• Control Circuit Repair

• Preventive Maintenance (PM)
• Periodic Health Checkup
• Cleaning & Calibration
• Load Testing

• Breakdown Service at Site
• Emergency Support (24/7*)
• Installation & Commissioning
• Parameter Setting & Optimization

• Industrial Motors
• Pumps & Compressors
• Conveyor Systems
• HVAC Systems
• Crushers & Heavy Machinery

• ABB
• Siemens
• Schneider Electric
• L&T
• Danfoss
• Delta
• All Other Indian & Imported Brands

• Experienced Technical Team
• Fast Turnaround Time
• Cost-Effective Solutions
• Genuine Spare Parts
• On-Site & Remote Support
• AMC (Annual Maintenance Contract) Available

1. Fault Analysis
2. Detailed Inspection
3. Repair / Replacement
4. Testing & Quality Check
5. Delivery / Installation

• Soft Starter Panel Designing
• Spare Parts Supply
• Retrofit & Upgradation
• Drive & Automation Support

Our Power Supply Repairing Service provides reliable diagnostics and repairs for all types of power supplies, ensuring stable and efficient operation. We specialize in fault detection, component replacement, and testing to restore full functionality and prevent future issues.

01. Danfoss VFD
02. Delta VFD
03. Siemens VFD
04. Yaskawa VFD
05. Allen Bradley VFD
06. Schneider VFD
07. Eaton VFD
08. INVT VFD
09. Lenze VFD

10. Toshiba VFD
11. Fuji VFD
12. Hitachi VFD
13. Emerson VFD
14. Nidec VFD
15. Honeywell VFD
16. Inovance VFD
17. L&T VFD

We specialize in repairing and servicing a wide range of industrial electronic equipment used in automation, manufacturing, and process industries.
Our goal is to minimize downtime and maximize equipment life with expert diagnostics and precision repair.

• PLC Modules & Cards
• VFD / AC Drive Units
• DC Drives & Controllers
• HMI Panels & Touch Screens
• SMPS & Power Supplies
• Servo Drives & Controllers

• Industrial Control Cards
• Temperature Controllers
• Thyristor & SCR Units
• IGBT Modules & Power Electronics
• Industrial PCB Repair

• CNC Machine Electronics
• Packaging Machine Controllers
• Textile Machine Electronics
• Printing Machine Panels
• Specialized Machine Control Boards

• Sensors & Signal Converters
• Timers & Counters
• Industrial Relays & Protection Devices
• Battery Chargers & UPS Cards
• Custom Electronic Assemblies

✔ Advanced fault diagnosis
✔ Component-level repairing
✔ Genuine spare replacement
✔ Fast turnaround time
✔ Cost-effective solutions
✔ On-site & off-site service support

1. Equipment Inspection
2. Fault Diagnosis
3. Repair & Component Replacement
4. Testing & Quality Check
5. Delivery & Installation Support

• Manufacturing Industries
• Power Plants
• Cement Plants
• Textile Industries
• Packaging Industries
• Food Processing Units

We offer customized AMC plans for:

• Preventive Maintenance
• Breakdown Support
• Spare Management
• Priority Service

• Experienced Engineers
• Multi-brand Support
• Latest Testing Equipment
• Quick Response Team
• Affordable Pricing

ANALOG TO DIGITAL CONVERSION SERVICE**

We provide advanced Analog to Digital Conversion (ADC) upgrades for Servo Voltage Stabilizers, transforming outdated analog control systems into modern, intelligent digital systems for better reliability and efficiency.

✔ Higher Accuracy Voltage Control
✔ Faster Response Time
✔ Improved Stability & Reliability
✔ Reduced Maintenance Cost
✔ Smart Monitoring & Diagnostics
✔ Energy Efficient Operation

• Carbon brush & relay-based control removal
• Replacement with microcontroller / digital control system

• High-speed digital sensing circuits
• Precision voltage regulation
• Auto calibration features

• Digital display (Voltage, Current, Status)
• Fault indication & alarms
• Optional remote monitoring

• Compatible with existing servo motors
• Minimal modification to existing panel
• Safe and reliable wiring upgrades

• ±1% Voltage Regulation Accuracy
• Intelligent Over/Under Voltage Protection
• Overload & Short Circuit Protection
• Auto/Manual Operation Mode
• Data Logging (Optional)
• IoT / Remote Access (Optional Upgrade)

• Industrial Machinery
• CNC Machines
• Printing & Packaging Units
• Textile Industries
• Hospitals & Laboratories
• Commercial Buildings

✔ Site Inspection & Analysis
✔ Complete Conversion Work
✔ Testing & Calibration
✔ On-Site Installation
✔ Operator Training
✔ After-Sales Support

• Increased Equipment Life
• Reduced Downtime
• Stable Power Supply
• Improved Production Efficiency
• Cost Saving on Repairs

• Touch Screen Interface (HMI)
• Remote Monitoring System
• GSM Alerts
• AMC (Annual Maintenance Contract)

✔ Experienced Industrial Automation Engineers
✔ Quick Turnaround Time
✔ Cost-Effective Solutions
✔ Reliable & Long-Lasting Upgrades
✔ Strong Technical Support

We provide expert repair, maintenance, and troubleshooting services for all types of air compressor controllers. With strong experience in industrial automation and electronics, we ensure fast, reliable, and cost-effective solutions to minimize downtime.

• Screw Compressor Controller Repair
• Reciprocating Compressor Controller Repair
• PLC-Based Compressor Control Systems
• Microprocessor / Digital Controller Repair
• HMI-Based Compressor Interface Repair

• Controller not powering ON
• Display / Keypad not working
• Sensor & feedback signal issues
• Pressure / Temperature control faults
• Communication errors (Modbus / CAN / RS485)

• Emergency breakdown support
• Controller panel inspection
• Wiring & signal checking
• Parameter setting & calibration
• Trial run & performance verification

• Routine health checkup of controllers
• Cleaning & terminal tightening
• Firmware / software check
• Backup & parameter verification

We repair controllers of all major brands:

• Atlas Copco
• Ingersoll Rand
• ELGi Equipments
• Kaeser
• Kirloskar Pneumatic
• Chicago Pneumatic
• Gardner Denver

• Industrial Electronics Repair
• PLC, HMI & VFD Integration
• PCB Level Troubleshooting
• Reverse Engineering of Control Circuits
• Automation Upgradation Solutions

✔ Fast Turnaround Time
✔ Cost Effective Repair Solutions
✔ Experienced Technical Team
✔ Genuine Spare Replacement
✔ On-Site & Off-Site Support
✔ Service Warranty Available

• Manufacturing Plants
• Packaging Industry
• Textile Industry
• Pharma Industry
• Food & Beverage
• Automotive Industry

Human Machine Interface (HMI) systems are critical for industrial automation, enabling operators to monitor and control machines efficiently. Modern HMI panels provide real-time visualization, improved productivity, and seamless communication with PLC systems.

We offer a complete range of HMI spare parts, repair, and replacement solutions for all major industrial brands.

• Resistive & Capacitive touch panels
• Sizes: 3.5”, 4.3”, 7”, 10.1”, 12”
• Compatible with multiple OEM panels
• Scratch-resistant industrial glass

✔ Suitable for damaged / non-responsive touch

✔ Plug & play replacement options

• Power supply boards
• CPU & logic boards
• Display modules (LCD / TFT)
• Communication ports (Ethernet, USB, Serial)
• Backlight LED assemblies

✔ Cost-effective repair solution

• Programming cables
• Mounting clamps
• Protective covers
• Memory cards (SD / Flash)
• Interface modules

• High brightness TFT display (up to 440 cd/m²)
• Long life backlight (up to 50,000 hours)
• IP65 front protection (dust & water resistant)
• Fast processing CPUs for smooth operation

• CNC Machines
• Packaging Machinery
• Textile Industry
• Food Processing Plants
• Pharma Automation
• Material Handling Systems

• HMI Repair & Refurbishment
• Touch Glass Replacement
• Data Backup & Program Upload
• On-site troubleshooting
• AMC (Annual Maintenance Contract)

• Multi-brand expertise (Siemens, Delta, Omron, Schneider, Mitsubishi)
• Fast turnaround time
• Genuine & compatible spare parts
• Competitive pricing
• Field service support

Additional Information:

• Delivery Time: 7-14 DAYS /EX STOCK

 Electromagnetic Brakes are essential mechanical devices that use an electric current to create a magnetic field, which then engages or disengages a braking mechanism.¹ When current flows, the electromagnet attracts an armature plate, causing friction that stops or holds a rotating shaft or linear motion.² They offer precise, rapid response times and are highly controllable, making them ideal for applications requiring quick stops, accurate positioning, or secure holding, such as in robotics, conveyors, elevators, and various industrial machinery. These brakes are reliable, durable, and critical for both operational efficiency and safety.³

• Provides AC repair, servicing, and maintenance
• Suitable for panel AC, split AC, industrial cooling units
• 24×7 service available
• Covers Indore and nearby industrial areas

• Specialized in industrial panel AC repair (PLC, VFD, MCC panels)
• Services include:
  • Panel AC breakdown repair
  • Gas charging & leak fixing
  • Compressor, PCB & fan motor repair
  • Preventive maintenance (AMC)
• Focus on factories & automation panels

• Book technicians online for AC repair
• Services include:
  • Cooling issues, gas refill, leakage
  • PCB & compressor repair
  • Deep cleaning & maintenance
• 30-day service warranty available

Panel AC is used in electrical control panels (PLC, VFD, CNC machines) to prevent overheating. Common problems include:

• No cooling / high panel temperature
• Compressor not starting
• PCB fault
• Gas leakage
• Dust choking in condenser

Regular maintenance is important to avoid machine breakdown and production loss

• Prefer industrial experience (very important for panel AC)
• Ask for site visit & diagnosis first
• Check if they handle PLC / VFD panels
• AMC (Annual Maintenance Contract) is best for factories

We specialize in repairing and maintaining Industrial PCs used in automation, manufacturing, and process industries. Our expert engineers provide quick diagnostics and reliable repairs to minimize downtime and ensure smooth operations.

• Motherboard repair
• SMPS / Power supply repair
• CPU & processor troubleshooting
• Industrial-grade component replacement

• Windows / Embedded OS installation
• SCADA / HMI software troubleshooting
• Driver installation & configuration

• Hard disk / SSD replacement
• RAM upgrade & repair
• Cooling fan & thermal management
• Touchscreen & display repair

• COM / USB / Ethernet port repair
• Communication failure troubleshooting
• I/O interface repair

• Manufacturing Plants
• Packaging Industries
• Textile Industries
• Pharmaceutical Units
• Power Plants
• Automation & Robotics

✔ Experienced Engineers
✔ Fast Turnaround Time
✔ Cost-Effective Solutions
✔ Genuine Spare Parts
✔ On-Site & Off-Site Support
✔ Emergency Breakdown Service

• Machine breakdown support
• Industrial PC installation
• Preventive maintenance
• System upgrades

We offer customized AMC plans:

• Routine health check-ups
• Priority service support
• Reduced repair costs
• Spare management

• PC not booting
• Frequent hanging / freezing
• Display issues
• Power failure
• Communication errors with PLC/HMI
• Overheating problems

• Siemens Industrial PCs
• Delta
• Allen-Bradley
• Mitsubishi
• Schneider Electric
• Advantech

We provide professional Flow Meter Repairing Services for all types of industrial flow measurement devices. Our expert technicians ensure accurate calibration, fault diagnosis, and restoration to optimal performance—minimizing downtime and improving process efficiency.

• Electromagnetic Flow Meters (Mag Flow)
• Ultrasonic Flow Meters
• Turbine Flow Meters
• Vortex Flow Meters
• Mass Flow Meters (Coriolis & Thermal)
• Differential Pressure (DP) Flow Meters
• Rotameters (Variable Area Flow Meters)

• Complete fault diagnosis and troubleshooting
• PCB/card-level repair
• Sensor and transmitter repair
• Display and keypad restoration
• Wiring and connectivity correction
• Signal output calibration (4–20 mA, pulse, etc.)
• Firmware/software correction (if applicable)
• Leakage and sealing repair
• Flow accuracy testing and calibration

• In-house and on-site calibration services
• Accuracy verification with standard instruments
• Flow simulation and testing
• Calibration certificates provided

• Experienced and skilled engineers
• Quick turnaround time
• Cost-effective repair solutions
• Genuine spare parts usage
• On-site and off-site support
• Support for all major brands

• Water & Wastewater Treatment
• Oil & Gas
• Chemical & Pharmaceutical
• Food & Beverage
• Power Plants
• Cement & Steel Plants

We offer customized AMC plans for regular inspection, preventive maintenance, and priority service support to ensure uninterrupted operations.

• On-site repair and support
• Workshop repair facility
• Emergency breakdown services