Reliable Engineers

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP

• Effluent treatment plants
• Filter Press for Dyes & Intermediates
• De-scaling
• Scrubbing of corrosives gases
• Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
• Pickling in steel Rolling mills
• Electro plating process

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries

Pumps are provided with Teflon gland or mechanical seal as per requirement

All wetted parts are made from high pressure molded polypropylene

Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic

Special Features of MHPP Series

Back pull out casing, very easy for maintain

Heavy duty caster bearing housing

MVGP Series

No seal, stuffing box & gland

Pump can run even in dry condition

Maintenance free

Vertical submerged pumps no priming is required as pumps portion remain in liquids

Pumps are specially design for highly corrosive liquids in priming is not possible

Shaft is covered with polypropylene sleeve for protection from corrosives liquids

Available in different length

Available in correspond models of MHPP and MVGP

Application:

Effluent treatment plants

Filter Press for Dyes & Intermediates

De-scaling

Scrubbing of corrosives gases

Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage

Pickling in steel Rolling mills

Electro plating process

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries

Pumps are provided with Teflon gland or mechanical seal as per requirement

All wetted parts are made from high pressure molded polypropylene

Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic

Special Features of MHPP Series

Back pull out casing, very easy for maintain

Heavy duty caster bearing housing

MVGP Series

No seal, stuffing box & gland

Pump can run even in dry condition

Maintenance free

Vertical submerged pumps no priming is required as pumps portion remain in liquids

Pumps are specially design for highly corrosive liquids in priming is not possible

Shaft is covered with polypropylene sleeve for protection from corrosives liquids

Available in different length

Available in correspond models of MHPP and MVGP

Application:

Effluent treatment plants

Filter Press for Dyes & Intermediates

De-scaling

Scrubbing of corrosives gases

Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage

Pickling in steel Rolling mills

Electro plating process

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Additional Information:

• Item Code: VGRE-120
• Production Capacity: 10 NOS PER MONTH
• Delivery Time: ex-stock
• Packaging Details: CORRUGATED BOX

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Being a well established-organization, we are engaged in manufacturing, exporting & supplying a distinguished range of Vertical Sump Pumps. Our offered pumps are intricately designed under the vigilance of skilled professionals using quality tested raw material and sophisticated technology in line with the international quality standards. Clients can avail this range in various designs, shapes and sizes at market leading price within given period of time.

Reliable engineers are expertise in manufacturing of Vertical Sump Pumps, Design of pump is sturdy and parts are with long life, manufacturers & exporters Vertical Sump Pumps.

Submerged Vertical Centrifugal Pump:

• Reliable vertical pumps are centrifugal type of single stage with semi open impellers at bottom. Handling liquids, containing solids, have a tendency to polymerize or crystallize
  
  Special Features:
  • No mechanical seal stuffing box required
  • All the wet parts are in P.P. & Teflon construction with stand corrosion & erosion.
  • No foot valve required to lift from negative suction
  • No. leakages problem just like gland or mechanical seal
  • Normal maintenance
  • Easy Alignment
  • Heavy duty bearing bracket.
  • Centrifugal, quiet, vibration free
  • In M.S. or S.S. Pump shaft are En-8 or SS-316
  • Impeller are semi-open type hydraulically balanced by back wanes or in the case of large impeller diameters by balancing holes and ware rings both sides
  • In P.P. pump shaft are quoted with P.P. sleeve supported in upper part by heavy ball bearing and in the lower part by a bearing bush and according to the shaft length. They are provided with an intermediate bush

Specifications:

Application:

• • • Chemical Industries
    • Petrochemicals
    • Refineries
    • Fertilizers. Slurries or Clear Liquid
    • Inflammable & Toxic Liquid
    • Corrosive Liquids
    • General Industries

• Smooth finish
• Unique look
• Innovative design

Our organization has gained recognition as the affluent manufacturer, exporter and supplier of a high quality range of SS Self Priming Pumps. The offered pumps are manufactured using high grade raw material and contemporary technology. We assure our clients that our offered products are quality-tested on predefined parameters, in order to ensure their conformity with the international standards of quality.

Special Features:

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

Also Available In Bare And Mono Block Pump:

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

MOC: SS-304/SS316/SS316L

Seal :Different types of seal are available as per liquids ,normally pumps are fitted with silcon carbide/silicon carbide with Teflon parts.

Trolley Mouted is Available:

Able to handle temperature up to 80 C. Pump as customer requirement are also available.

Application:

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

Additional Information:

• Delivery Time: EX-STOCK

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Additional Information:

• Item Code: VGRE-100
• Production Capacity: 10 PER MONTH
• Delivery Time: 10 DAYS
• Packaging Details: CORRUGATED BOX

Being a well established-organization, we are engaged in manufacturing, exporting & supplying a distinguished range of Vertical Sump Pumps. Our offered pumps are intricately designed under the vigilance of skilled professionals using quality tested raw material and sophisticated technology in line with the international quality standards. Clients can avail this range in various designs, shapes and sizes at market leading price within given period of time.

Reliable engineers are expertise in manufacturing of Vertical Sump Pumps, Design of pump is sturdy and parts are with long life, manufacturers & exporters Vertical Sump Pumps.

Submerged Vertical Centrifugal Pump:

• Reliable vertical pumps are centrifugal type of single stage with semi open impellers at bottom. Handling liquids, containing solids, have a tendency to polymerize or crystallize

Special Features: No mechanical seal stuffing box required
• All the wet parts are in P.P. & Teflon construction with stand corrosion & erosion.
• No foot valve required to lift from negative suction
• No. leakages problem just like gland or mechanical seal
• Normal maintenance
• Easy Alignment
• Heavy duty bearing bracket.
• Centrifugal, quiet, vibration free
• In M.S. or S.S. Pump shaft are En-8 or SS-316
• Impeller are semi-open type hydraulically balanced by back wanes or in the case of large impeller diameters by balancing holes and ware rings both sides
• In P.P. pump shaft are quoted with P.P. sleeve supported in upper part by heavy ball bearing and in the lower part by a bearing bush and according to the shaft length. They are provided with an intermediate bush
•

Specifications:

-----

Up to 40 MTRS

Material of Construction

Flow

Up to 50 M3 /HR

------

Motor HP

1HP to 20 HP

Poly Propylene, M.S., C.I., S.S.

Application:

•
• Chemical Industries
• Petrochemicals
• Refineries
• Fertilizers. Slurries or Clear Liquid
• Inflammable & Toxic Liquid
• Corrosive Liquids
• General Industries

•

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Additional Information:

• Item Code: VGRE-160
• Production Capacity: 10 NOS PER MONTH
• Delivery Time: 15 DAYS
• Packaging Details: CURROGATED BOX