Reliant Lab

Brand	Reliant lab
Automation Type	Semi-Automatic
Sump Tank	25 LTRS
Capacity	70 LTRS
Material	Stainless Steel
Water Handling	0.5 HP PUMP,Crompton Make

It consists of a tank provided with inlet supply diffuser, overflow, and provision for  fitting Orifice or Mouthpiece at the outlet of tank. An arrangement is done to vary  head and keep it constant at desired level. A pointer gauge arrangement for  measuring X-Y co-ordinates of Jet is also fitted. Present set-up is self-contained  water re-circulating unit, provided with a sump tank and a centrifugal pump etc.   Flow rate of water is measured with the help of measuring tank and stop watch.

Additional Information:

• Item Code: RLFM-104
• Delivery Time: 8 DAYS

Brand	Reliant Lab
Usage/Application	Lab Experiments
Material	Stainless Steel
Phase	Single Phase
Model Name/Number	RLFM-114

A Pitot Tube is used to measure the local velocity at a given point in the flow  stream. A pitot tube of standard design made of copper/SS is supplied and is fixed  below vernier scale. The vernier scale is capable to measure the position of Pitot  Tube in transparent section. The pipe has a flow control valve to regulate the flow.  An differential water manometer is provided to determine the velocity head.  Present set-up is self-contained water re-circulating unit, provided with a sump  tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in  water line to conduct the experiment on different flow rates. Flow rate of water is  measured with the help of measuring tank and stop watch

Brand	Reliant Lab
Model	RLFM-103
Material	Stainless Steel
Usage/Application	EXPERIMENTAL
Capacity	70 LTRS
Operating Voltage	220v

The Lab setup consists of a channel having sufficient length and width in which  water is supplied from the bottom. Required Notch is fitted at one end of this  channel .A hook gauge with Vernier scales fitted to measure the height of fluid in flow channel. Arrangement for fixing interchangeable notches is made. Set of  three brass notches. i.e. rectangular notch . 60V notch & 45V notch provided along with the set up. Present set up is self contained water re·circulating unit provided  with a sump tank and centrifugal pump Etc Flow control valve and by· pass value  are fitted in water line to conduct the experiment on different flow rate, Flow  rate of water is measured with the help of measuring tank and stopwatch

Additional Information:

• Item Code: RLFM-103
• Delivery Time: 8 DAYS

Brand	Reliant Lab
Usage/Application	For Lab Experiments
Material	Stainless Steel
Phase	Single Phase
Model Name/Number	RLFM-106
Features	Flow Measurement : Using Measuring Tank with Piezometer

The setup consists of a clear Acrylic fabrication section. Water is fed through a nozzle and discharged vertically to strike a target carried on a stem, which extends through  the cover. A weight carrier is mounted on the upper end of the stem. The dead weight of the moving parts is counter balanced by a compression spring. The vertical force exerted on the target plate is measured for applied weights. Two targets are provided  with the setup (flat plate and hemispherical cup).  

Material	SS
Test Section	Acrylic
Water Circulation	By Pump
Pressure Gauge	0-4kg/cm2
Sump Tank	60 LTRS

The apparatus has been designed to demonstrate the phenomenon of cavitation.  The present set-up consists of a test section made of Acrylic having conversion and  diversion section. Pressure tapings at appropriate position are provided. This test  section is having one control valve at upstream side to regulate the water flow rate.  Two pressure gauges are connected to these taping which give the pressure readout at the time of flow passing through this test section. The unit is self-contained close circuit type with sump tank, measuring tank and centrifugal pump. Flow through  test section can be regulated with the help provided by-pass and control valve. 

Additional Information:

• Item Code: RLFM-117
• Delivery Time: 8 days

Brand	Reliant lab
Model	RLFM-102
Automation Type	Semi-Automatic
Usage/Application	EXPERIMENTAL
Capacity	70 LTRS
Material	Stainless Steel
Stop Watch	Electronic
Water Circulation	0.5 Hp Pump,Crompton make

The equipment is designed and fabricated to demonstrate the Bernoulli's  theorem.  It consists of a test section made of acrylic.  It has convergent and  divergent sections.  Pressure tapings are provided at different locations in  convergent and divergent section. Present set-up is self-contained water re-circulating unit, provided with a sump  tank, centrifugal pump etc. An arrangement is done to conduct the experiment  on different flow rates. Flow rate of water is measured with the help of  Measuring tank and stopwatch.

Additional Information:

• Item Code: RLFM-102
• Delivery Time: 8 DAYS

Usage/Application	Lab Experiments
Type Of Instruments	Educational
Material	Stainless Steel
Color	White
Model Name/Number	RLFM-110
Capacity	50 LTRS
Phase	SINGLE

The apparatus consists of a pipe line contains one Veturimeter. Veturimeter is  made from clear Acrylic. The pressure tapings from the Veturimeter is taken to  differential manometer to measure pressure difference. A valve is provided at the  downstream side of Veturimeter. The flow can be regulated by this valve.    Present set-up is self-contained water  re-circulating unit, provided with a sump  tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in  water line to conduct the experiment on different flow rates. Flow rate of water  is measured with the help of measuring tank and stop watch. 

Additional Information:

• Delivery Time: 7 DAYS

Phase	Single Phase
Brand	Reliant lab
Voltage	220VAC
Frequency	50Hz
Current	5-15 amp
Chemical Required	Dye ( KMno4) -10gm
Floor Area Required	1.5mx0.75m

With an objective to fulfill the ever-evolving demands of our clients, we are engaged in offering a wide assortment of Reynold Apparatus.

The Apparatus consists of galss tu e with one end having bell mouth entrance, Connected to a constant head water tank at the other end a vlave is provided to very the flow rate the tank is of sufficient capacity to store water. A Capillary tube is introduced centrally in the bell mouth for feeding dye from a small container placed at the top of tank, through polythene tubing. By varying the rate of flow, the Reynolds''s number is changed this also changes the type of flow visual oservation of dye ( Thread) Will indicate the type of flow, Which cna be confirmed from the Reynold''s Number computed. Present set up is self contained water re circulating unit provided with a sump tank and a centrifugal pump etc. Flow control valve and by pass valve are fitted in water line. Flow rate of water is measured with the help of measuring cylinder and stop watch.
Experimentation:

• To determine the Reynold''s number and hence the Type of flow either laminar or Turbulent .
• To study transition zone.

Utilities Required.

• Electricity supply: combined socket with earth connection. Earth voltage should be less than 5 volts.
• Water Supply ( Intial Fill)
• Floor drain required.

Technical Details:

• Tube : Material Borosilicate Glass ( ID 14mm approx Length :600mm)
• Dye Vessel: Material Stainless Steel , Capacity 1Ltrs ( approx)
• Capillary Tube : Material copper / Stainless Steel
• Constant Head Water Tank: Capacity 40 Ltrs
• Water Circulation: 1/2 HP Pump, Champion/ Standard Make
• Flow Measurement : Using measuring cylinder with electronic stop watch
• Sump Tank : Capacity 60 Ltrs
• Control Panel Comprises Of : Standard make on/off switch mains indicator,etc.
• Tanks will be mad of stainless steel
• An English instruction manual consisting of experimental procedures block diagram etc. Will be provided along with the Apparatus.
• The Whole Set up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Additional Information:

• Item Code: RLFM101
• Delivery Time: 10 days

Model	RLFM-116
Brand	Reliant Lab

The Centre of Pressure Apparatus has been designed to determine the static thrust exerted by a fluid on a submerged surface and allow comparison of the measured magnitude and position of this force with simple theory.

A fabricated quadrant is mounted on a balance arm, which pivots on knife-edges. The knife-edges coincide with the centre of arc of the . Thus, of the hydrostatic forces acting on the quadrant when immersed, only the force on the rectangular end face gives rise to a moment about the knife-edges.

The balance arm incorporates a balance pan for the weights supplied and an adjustable counterbalance. This assembly is mounted on top of an acrylic tank, which may be leveled by adjusting screwed feet. An indicator attached to the side of the tank shows when the balance arm is horizontal.

Water is admitted to the top of the tank by a flexible tube and may be drained through a cock in the side of the tank. The water level is indicated on a scale on the side of the quadrant.

Additional Information:

• Item Code: RLFM-116
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Delivery Time: 8 DAYS

Country of Origin	Made in India
Brand	Reliant Lab
Material	Stainless Steel
Application	Laboratory
Power Source	Electric Motor
Flow Measurement	Using Rotameter.

Riding on unfathomable volumes of industrial expertise, we are providing a broad array of Free Vortex Apparatus.

Other Details:
The experimental set up consist of a circular transparent cylindrical tank in which four circumferential jets are placed along the circumference of the cylinder near its bottom which helps in the formation of free vortex. It is assumed that the torque exerted by these jets is negligible. A pointer can be transversed horizontally & vertically across full diameter of the vessel so that water surface profile can be measure. Both axes contain graduations so that exact position of the pointer is known. The experimental procedure involves measurement of the resulting free surface that represents the variation of the sum of the pressure head and datum head. An arrangement is provided to drain the vessel.

Experimentation-To plot the surface profile of a free vortex by measurement of the surface profile coordinates and to show that total energy is constant throughout vortex.

Additional Information:

• Item Code: RLFM-118
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Brand	Reliant Lab
Material	Stainless Steel

Backed by rich industry experience and market understanding, we are involved in offering a wide array of Free & Forced Vortex Apparatus to our valued patrons.

Other Details:
The free vortex experimental set up consist of a circular transparent cylindrical tank in which four circumferential jets are placed along the circumference of the cylinder near its bottom which helps in the formation of free vortex. It is assumed that the torque exerted by these jets is negligible. A pointer can be transversed horizontally & vertically across full diameter of the vessel so that water surface profile can be measure.

Both axes contain graduations so that exact position of the pointer is known. The experimental procedure involves measurement of the resulting free surface that represents the variation of the sum of the pressure head and datum head. An arrangement is provided to drain the vessel.

The forced vortex experimental set up consist of a circular transparent cylindrical tank in which plate is rotated with the help of a variable speed motor so that the cylinder rotates about its vertical axis with the help of a V belt and forced vortex is formed. An upper probe can be transversed horizontally & vertically across full diameter of the vessel so that water surface profile can be measure. Both axes contain graduations so that exact position of the probe is known. The experimental procedure involves measurement of the resulting free surface that represents the variation of the sum of the pressure head and datum head. An arrangement is provided to drain the vessel

Additional Information:

• Item Code: RLFM-119
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Brand	Reliant Lab
Voltage	220V AC
Phase	Single Phase
Power	0.5 kW
Pitot Tube Material	Copper/SS of compatible size
Hook Pointer Gauge	With Vernier Scale
Test Section	Material Clear Acrylic, compatible

Features:

The set up consists of a ½” bend and elbow, a sudden expansion & sudden contraction

fitting from 15mm to 25mm, ball valve and gate valve. Pressure tapings are provided at

inlet and outlet of these fittings under test. A differential manometer fitted in the line

gives pressure loss of individual fittings. Present set-up is self-contained water re-circulating

unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pas

s valve are fitted in water line to conduct the experiment on different flow rates.

Flow rate of water is measured with the help of measuring tank and stop watch.

 

Additional Information:

• Item Code: RLFM-107
• Pay Mode Terms: T/T (Bank Transfer),Other