Reliant Lab

Material	Metal
Brand	Reliant Lab
Shape	Rectangle
Phase	Single Phase
Usage/Application	Laboratory
Color	Black or grey
Automation Type	Automatic
Finishing	painted
Length	1m 1.5m
Voltage	220 VAC
Country of Origin	Made in India

Consisting of two steel rods of 1” diameter supported on a heavy cast iron feet provided with levelling screws, one rod is graduated in millimetres. Heavy metal sliders each take 12.5mm diameter stem, index mark attached to each slider. With third supporting rod.

Complete with two-lens holders spring type and centring pin.

NOTE: This bench is supplied only in 1&1/2 meter length.

(a) M.S.Rod
(b) Stainless steel Rod 

Additional Information:

• Item Code: RLP-226
• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A

Material	Metal
Brand	Reliant Lab
Shape	Rectangle
Usage/Application	Educational
Certification	ISO 9001:2015
Coated	Powder
Color	Grey
Length	1m 2m
Country of Origin	Made in India

The Bed is a heavy cast iron with a strong central rib,thoroughly seasoned and aged before machining and grinding of its upper surface. Total length 180cms; with a machined full-length platform for the scale.

 

The scale is from lifetime stainless steel fitted on its machined platform on the bed. Divided in mms to a length of 170cms. Accuracy of calibration # 0.01%.

 

THE CARRIAGE:

 

Four carriages are provided to carry the standard experimental accessories. Under- surfaces of carriages are machined true to fit the machined bed surface, and these machined surfaces are then jointly interground to give perfectly smooth sliding surfaces.

 

While inter-ground tests are surfaces are then jointly interground to give perfectly smooth sliding surfaces.

 

While inter-ground tests are carried out to ensure elimination of lateral shift during slide movements.

 

Stainless verniers fitted to the carriages read the scale to.01cm. The Biprism carriage is also provided with fine cross motion read by vernier to.01cm. Clamping arrangement is provided.

 

(a)OPTICAL SLIT: With finely ground stainless jaws, oil-ground & optically tested. Manipulation of jaw movement free from any spring control ensuring maintenance of original accuracy even after prolonged use. The following adjustments are provided for the slit and its carriage.

a) Linear adjustment along the bed, read by vernier to .01cm
b) Fine vertical adjustment by slow motion screw. 

(b) BIPRISM HOLDER: Provided with the following adjustments:-

a) Linear adjustment along the bed, read by vernier to.01cm.
b) Fine vertical adjustment by slow motion screw.
c) Fine cross motion by Micrometer screw read by vernier to.01cm. 
d) Quick radial motion along the horizontal axis.
e) Fine radial motion along the horizontal axis. 

(c) MICROMETER EYE PIECE: Provided with following adjustment:-

a) Quick linear adjustment along the bed read by vernierto.01cm.
b) Fine micrometer vertical adjustment
c) Micrometers cross motion of Eyepiece along a 30-0-30mm scale read on a micrometer head to.001cm. Micrometer head fitted with anti-back-lash device.

Additional Information:

• Item Code: RLP-241
• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A