Right Solutions

Usage/Application	Paints & Coatings
Color	Transparent
Brand	Araldite
Grade Standard	Chemical Grade
Form	Liquid
Item Code	GY257
Packaging Size	220 Kg
Material	Epoxy
Shelf Life	12 Month
Type	Solvent-Cut

Being quality-centric firm, we are engaged in presenting a high-class range of Araldite GY 257 Epoxy Resin Huntsman. We assure our clientele the prompt delivery of these products at reasonable prices.

Araldite GY 257 can be cured with polyamines, polyamidoamines or their adducts for solvent-free coatings, self-leveling and mortor floors, concrete injections, structure adhesives, trowelling compounds and impregnation systems. In combination with unmodified epoxy resins, like Araldite GY 250 and Araldite GY 6010 the viscosity of the end formulation can be reduced. Due to the low viscosity and the full crystallization resistance Araldite GY 257 is a most suitable epoxy resin in formulating solvent free systems yielding,

Product Description:

Very good processing properties

Good mechanical performances

Good surface penetration

Medium chemical resistance / good acid and solvent resistance

Brand	Araldite
Usage/Application	Paints & Coatings
Color	Transparent
Grade Standard	Technical Grade
Form	Liquid
Pack Type	9 Kg
Shelf Life	6 Month
Model No.	Huntsman
Material	Epoxy

Leveraging on our skilled and qualified professionals, we are actively involved in offering a trendy range of Araldite Standard Epoxy Adhesive Resin to our valuable customers at pocket-friendly prices.

Product Description:

Araldite AW 106

Standard epoxy resin for use with araldite epoxy hardener

Hardener Hv 953 IN

For use with araldite epoxy resin

Brand	Atul
Packaging Size	2 Kg
Form	Gel
Viscosity	25 Degree C
Shelf Life	12 Month

Being a trustworthy name in the industry, we are able to offer a superior quality array of Atul Epoxy Adhesive to our patrons.

Description:
Lapox Crafto Supreme is two component modified, viscous epoxy adhesive system. When both components are mixed in recommended ratios and cured appropriately at room temperature, an excellent bond strength can be achieved with most of the substrates including glass, metals, plastics, wood, textile and natural stones. Faster productivity can be achieved, if curing is performed at higher temperature between 40°C and 60°C. Curing at higher temperature is recommended to achieve optimum bond strength.

Applications:

• Artificial jewellery and jewel stone fixing
• Bangles
• Ceramic Handicraft industries

Advantages:

• Electrically insulating
• High bond strength and mechanical strength even in dynamic conditions
• Thermally stable and suitable to perform in extreme conditions
• Water and chemical resistant

Processing:
Surface preparation: The adherents must be thoroughly degreased with a good degreasing solvent (e.g. toluene, acetone trichloroethylene) and abraded with coarse emery paper or chemically etched. Inadequately pre-treated substrates may not bond satisfactorily.

Application: The mixed mass is applied by brush or spatula on the surface to be adhered. The mix must be used within its pot life.

Curing: Curing normally takes place at room temperature within about 24 hours depending on the ambient temperature but may be accelerated by the application of heat.

Storage and handling:
Lapox Crafto Supreme should be stored in a cool and dry place, preferably in a sealed container and should not be exposed to direct sunlight. This product has a shelf life of one year, if stored in its original container between 2°C and 40°C away from humidity and excessive heat.

Safety:
Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of direct contact and irritation, it should be washed off immediately with soap and warm water. Avoid breathing vapours, mist or gas. Please refer to the Safety Data Sheet (SDS) of Lapox Crafto Supreme for detailed safety instructions.

Spills and disposal:
In case of spills, sweep up and shovel the spilled material. Keep spilled material in suitable, closed containers for disposal. Soak up with an absorbent such as clay, sand or other suitable material. Flush area with water to remove trace residue. Do not allow the product to reach the sewage system. Waste must be disposed of in accordance with federal, state or local regulations, as applicable.

Usage/Application	Industrial
Packaging Size	5
Product Code	APURVAPU
Usage	Paints & Coatings
Color	White
Brand	Sika
Grade Standard	Industrial Grade
Form	Liquid
Packaging Type	PACK
Density	1
Viscosity	1
Material	PU
Categories	Building Coating
Type	Waterborne

flooring in our new manufacturing facility, in Or. Akiva ... Solvent-based Two-component-based on Polyurethane Resin ... FLORTHANE SF is a high-build polyurethane coating that makes the flooring stain resistant and abrasion resistant. Its.

Additional Information:

• Item Code: AFIPU
• Production Capacity: 100
• Delivery Time: 30