X

Robosoft Labs

Mandawali, New Delhi, Delhi

| GST  07APAPR4879P2ZY

| Verified Supplier

View Mobile Number 90% Response Rate
Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Embedded Systems Kits and Accessories

Providing you the best range of Relay Board Module, AVR Usbasp Programmer, 4 Channel Relay Board Module, DTMF Decoder Module, Robosoft Labs Relay Board Module and RF Encoder Decoder Board with effective & timely delivery.

Relay Board Module
Interested in this product?
Get Best Quote

Relay Board Module

Rs 49 / PieceGet Latest Price

DesignCustomized
Model NumberSKURL302
BrandRobosoft Labs

Relay Board Module is able to control various appliances, and other equipment with large current. It can be controlled directly by Microcontroller.

Main Features:

  • Equipped with high current relay
  • Channel relay interface board
  • Small board PCB sizes
  • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
  • Relay status indicator LED (red)
  • Has the fixed bolt hole and easy installation

Module interface specifications (3 wires)

  • External 12V
  • GND external GND
  • 1N interchange relay control interface (Control by 3.3V or 5V Logic)

Package included:

  • 1 Channel +12V Relay Board Module For PIC AVR DSP ARM Arduino AVRDuino


Additional Information:

  • Item Code: SKURL302

View Complete Details

Yes, I am interested!

AVR Usbasp Programmer
Interested in this product?
Get Best Quote

AVR Usbasp Programmer

Rs 299 / PieceGet Latest Price

AVR Usbasp Programmer feature flash burner for AVR Series from ATMEL and 8051/8052 Microcontrollers. Communication - USB. Auto Erase before writing and Auto Verify after. Freeware AVR GCC C Compiler. ISP Programming Socket.

Main Features:

  • 8051 Development Board for Atmel 8051/8052
  • ISP Socket for Flashing
  • On board Regulated Power Supply 5v, 12v supplies
  • Easy to test with Berg Connectors wires
  • An RS232 Serial Port
  • 7 Segment Multiplexed Display
  • DC Power Supply Connector (12v Ac or Dc)
  • Ready interface for LCD display 2 line x 16 character
  • 24Cxx (I2C) (EEPROM)
  • RTC (DS1307)
  • 8 LED arrays
  • Matrix Key Pad
  • 4 Interrupt Switches
  • ADC Interface Support
  • ULN2008 Support for Interfacing Stepper Motors.

Package Content:

  • 8051 / 8052 Development Board with MAX232, RTC, AT24C32, ULN2003 IC
  • 8051 / 8052 / AVR USBasp Programmer


Additional Information:

  • Item Code: SKURL312

View Complete Details

Yes, I am interested!

4 Channel Relay Board Module
Interested in this product?
Get Best Quote

4 Channel Relay Board Module

Rs 159 / PieceGet Latest Price

4 Channel Relay Board Module is a 4-Channel Relay interface board, be able to control various appliances, and other equipment with large current.

Equipped with high-current relay, Rating
is as follows:

  • 7A-250V AC
  • 10A-125V AC
  • 12A 120V DC
  • 10A 28V DC
  • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
  • Has the fixed bolt hole and easy installation
  • Small board PCB size
  • four ways of relay status indicator LED (red)
  • Weight :150 gm
  • 4-Channel Relay interface board

Module interface specifications (6 wires)

  • External 12V
  • GND external GND
  • 1N1-1N4 interchange relay control interface by single chip IO

Package included:


  • 1 x 4 Channel Relay Board Modules
  • 4 Channel +12V Relay Board Module For PIC AVR DSP ARM Arduino AVRDuino


Additional Information:

  • Item Code: SKURL307

View Complete Details

Yes, I am interested!

DTMF Decoder Module
Interested in this product?
Get Best Quote

DTMF Decoder Module

Rs 165 / PieceGet Latest Price

DTMF Decoder Module decode DTMF audio signal to 4 bit binary TTL level output with LED indication. Suitable for use with microcontroller applications.

Main Features:

  • Decodes DTMF as 4 bit binary
  • TTL level output for direct connection to microcontrollers
  • Low power 5V DC operation
  • LED indication of outputs
  • Simple to use
  • Based on excellent HT9170B IC

Applications:

  • Remote Control systems
  • Caller ID applications
  • FM receiver based remote control
  • Remote control using Mobile phone

Specification:

  • Operating Voltage 5 V DC Regulated power supply input
  • Operating Current 100 mA

Information:

Connect regulated +5V DC supply for operation of the board. Outputs Q1-4 and VT are active high output at 5V level. If any LED is on means that output is at the high level. VT LED blinks once a new DTMF tone is received. The binary data appears at Q1 to Q4. A detail of this output is on next page. The input signal can be from an audio source like microphone amplifier, FM radio receiver, wired phone line. Please note when connecting landline phone signal, do not connect ground wire of board to phone line directly. Use a 100nF capacitor in series to phone line wires at ground.

Applications :

  • Mobile Controlled Robot
  • Home Automation
  • Lights On/Off Through Your Mobile Phone
  • Garage Door applications and many more etc

Package Contents:

  • 1 piece of DTMF Decoder module.
  • FREE 1 Piece 3.5mm Audio Jack Connector (FOR Connecting Mobile Phones)


Additional Information:

  • Item Code: SKURL327

View Complete Details

Yes, I am interested!

Robosoft Labs Relay Board Module
Interested in this product?
Get Best Quote

Robosoft Labs Relay Board Module

Rs 175 / PieceGet Latest Price

DesignCustomized
Model NumberSKURL399
BrandRobosoft Labs

Main Features:

  • 4-Channel Relay interface board
  • Equipped with high-current relay, Rating is as follows: 7A-250V AC, 10A-125V AC, 12A 120V DC and 10A 28V DC
  • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
  • Has the fixed bolt hole and easy installation
  • Small board PCB size
  • Relay status indicator LED (red)
  • Weight:100gm

Module interface specifications (3 wire)

  • External +5V/6V
  • GND external GND
  • 1N1-IN4 interchange relay control interface (Control by 3.3V or 5V Logic)

Package included:

  • 4 Channel +5V/6V Relay Board Module For PIC AVR DSP ARM Arduino AVRDuino


Additional Information:

  • Item Code: SKURL399

View Complete Details

Yes, I am interested!

RF Encoder Decoder Board
Interested in this product?
Get Best Quote

RF Encoder Decoder Board

Rs 249 / PieceGet Latest Price

RF Encoder Decoder Board is a RF encoder decoder interfacing board with HT12D HT12E IC chips. It is easy interfacing with the RF modules, using the female headers for placing the modules.

Main Features:

  • Easy interfacing with the RF modules, using the female headers for placing the modules.
  • Breakout pins for connecting to the microcontroller.
  • DIP switch, for manual Testing
  • Status LED and switch buttons.
  • Small size, high-quality PCB.

Package Contents:


  • 1 piece of RF encoder and decoder board with HT12E/HT12D IC chips.

Applications:

  • RF Controlled Robot Using RF Encoder and Decoder Module: Robosoft Labs
  • Home Automation
  • Switch On/Off lights and other home appliances through with RF


Additional Information:

  • Item Code: SKURL417

View Complete Details

Yes, I am interested!

Stepper Motor Driver Board Module
Interested in this product?
Get Best Quote

Stepper Motor Driver Board Module

Rs 119 / PieceGet Latest Price

Stepper Motor Driver Board Module is designed to Work with L293D IC popular motor driver IC designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.

Product Overview:

  • This Motor Driver Board is designed to Work with L293D IC.
  • The L293D is a popular motor driver IC designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.
  • Compact L293D Motor Driver Board makes it much more convenient to use.
  • This is most commonly used driver circuit in hobby robots.
  • This can control 2 DC Motors Bi-Directionally or 1 STEPPER Motor Bi-Directionally using control lines and can vary their speed using PWM.
  • You can Interface L293D with any microcontroller.
  • Built-In Pull-up Resistors.


Additional Information:

  • Item Code: SKURL422

View Complete Details

Yes, I am interested!

Optocoupler Relay Module
Interested in this product?
Get Best Quote

Optocoupler Relay Module

Rs 275 / PieceGet Latest Price

DesignCustomized
Model Number SKURL427
Brand Robosoft Labs

Optocoupler Relay Module provides a powerful, low-cost solution for prototyping and rapid development of the products.

Features:

  • 4-Channel Relay interface board
  • Equipped with high-current relay, Rating are as follows: 7A-250v AC, 10A-125V AC, 12A 120V DC and 10A 28V DC
  • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
  • Has the fixed bolt hole and easy installation
  • Small board PCB size
  • OPTOCOUPLER BASED PROTECTION
  • four ways of relay status indicator LED (red)
  • Weight :150 g

Module interface specifications (6 wire)

  • External +5V (VCC)
  • GND external GND
  • IN1-IN4

Package included:

  • 1 x 4 Channel +5V/6V OPTOCOUPLER BASED PROTECTION Relay Board Module for ALL MICROCONTROLLER


Additional Information:

  • Item Code: SKURL427

View Complete Details

Yes, I am interested!

Optocoupler Based Relay Board Module
Interested in this product?
Get Best Quote

Optocoupler Based Relay Board Module

Rs 245 / PieceGet Latest Price

DesignCustomized
Model NumberSKURL428
BrandRobosoft Labs

Optocoupler Based Relay Board Module which enables rapid application development and out-of-the-box productivity.

Features:

  • 4-Channel Relay interface board
  • Equipped with high-current relay, Rating are as follows: 7A-250v AC, 10A-125V AC, 12A 120V DC and 10A 28V DC
  • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
  • Has the fixed bolt hole and easy installation
  • Small board PCB size
  • OPTOCOUPLER BASED PROTECTION
  • four ways of relay status indicator LED (red)
  • Weight: 150 g

Module interface specifications (7 wire)

  • External +5V (VCC)
  • GND external GND
  • IN1-IN4
  • Relay Supply +12V (R_VCC)

Package included:

  • 1 x 4 Channel +12V OPTOCOUPLER BASED PROTECTION Relay Board Module for ALL MICROCONTROLLER

Note:

  • Relay and Component Colors varies as per availability.


Additional Information:

  • Item Code: SKURL428

View Complete Details

Yes, I am interested!

Relay Board Module with Optocoupler
Interested in this product?
Get Best Quote

Relay Board Module with Optocoupler

Rs 242 / PieceGet Latest Price

DesignCustomized
Model NumberSKURL432
BrandRobosoft Labs

Relay Board Module with optocoupler are the ideal platform for accelerating the development and reducing the risk of new designs. The technology in these boards delivers an optimal solution in terms of speed, accuracy, flexibility and cost.

Features:

  • 30A +5V/6V 1-Channel Relay interface board
  • Equipped with high-current relay, Rating are as follows:
  • 30A 120VAC/1HP (2) 30A 240VAC/2HP
  • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
  • Has the fixed bolt hole and easy installation
  • Small board PCB size
  • Relay status indicator LED (red)
  • With Optocoupler protection
  • Weight :100 g

Module interface specifications (3 wire)

  • External +5V
  • External GND
  • CTR interchange relay control interface (3.3v or 5V Logic)

Package included:

  • 30A +5V/6V Relay Board Module With optocoupler For 8051 PIC AVR ARM ARDUINO

Note:

  • Relay and Component Colors varies as per availability.


Additional Information:

  • Item Code: SKURL432

View Complete Details

Yes, I am interested!

30a 12v Relay Board Module With Optocoupler Protection
Interested in this product?
Get Best Quote
DesignStandard
Model NumberSKURL433
BrandROBOSOFT LABS

30A +12v Relay Board Module With optocoupler For 8051 PIC AVR ARM ARDUINO This is a 30A +12V 1-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino , AVRDuino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .
Features:


  • 30A +12V 1-Channel Relay interface board
  • Equipped with high-current relay, Rating are as follows: 30A 120VAC/1HP (2) 30A 240VAC/2HP
  • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
  • Has the fixed bolt hole and easy installation
  • Small board PCB size
  • Relay status indicator LED (red)
  • With Optocoupler protection
  • Weight :100 g

Module interface specifications (4 wire):

  • External +5V
  • External GND
  • CTR interchange relay control interface (3.3v or 5V Logic)
  • RS (Relay Supply) +12V

Package included:

  • 30A +12V Relay Board Module With optocoupler For 8051 PIC AVR ARM ARDUINO

Note:

  • Relay and Component Colors varies as per availability.


Additional Information:

  • Item Code: SKURL433

View Complete Details

Yes, I am interested!

1 Channel Relay Board Module
Interested in this product?
Get Best Quote

1 Channel Relay Board Module

Rs 75 / PieceGet Latest Price

DesignCustomized
Model NumberSKURL398
BrandRobosoft Labs

1 Channel Relay Board Module include easy access to MCU I/O, battery-ready, low-power operation, a standard-based form factor with expansion board options and a built-in debug interface for flash programming and run-control.

Features:

  • Channel Relay interface board
  • Equipped with high-current relay, Rating are as follows: 7A-250V AC, 10A-125V AC, 12A 120V DC, 10A 28V DC
  • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
  • Has the fixed bolt hole and easy installation
  • Small board PCB size
  • Relay status indicator LED (red)
  • Weight :100 g

Module interface specifications (3 wire):

  • External +5V/6V
  • GND external GND
  • 1N interchange relay control interface (Control by 3.3V or 5V Logic)

Package included:

  • 1 Channel +5V/6V Relay Board Module


Additional Information:

  • Item Code: SKURL398

View Complete Details

Yes, I am interested!

4X4 Matrix keypad
Interested in this product?
Get Best Quote

4X4 Matrix keypad

Rs 59 / PieceGet Latest Price

Main Features:

  • 4 x 4 (16 KEY) Matrix keypad (Switch Based)
  • INTERFACE PINS ( 8 PINS)
  • R1, R2, R3, R4
  • C1, C2, C3,C4

Package Contents:

  • 4 x 4 (16 KEY) Matrix keypad (Switch Based)


Additional Information:

  • Item Code: SKURL421

View Complete Details

Yes, I am interested!

Multiplexed Seven Segment Display
Interested in this product?
Get Best Quote
Lighting TypeLED
ShapeRectangle

Main Features:

  • Seven segment selector pins 0,1,2,3
  • Seven segment display pins A,B,C,D,E,F,G, DEC, GND
  • Four mounting holes 3,3 mm (0,13")

Package Content:

  • 4 Digit Multiplexed Seven Segment Display (Common Cathode)


Additional Information:

  • Item Code: SKURL420

View Complete Details

Yes, I am interested!
Tell us what you need, and we’ll help you get quotes
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Tell us what you need, and we’ll help you get quotes
I agree to the terms and privacy policy