Have a requirement?
Chat with us
Have a requirement?
Chat with us
Dr. Fixit Chemical
Color | Wine Red |
Physical State | Liquid |
Packaging Size | 5 Litre |
Packaging Type | Can |
Grade Standard | Reagent Grade |
Specific Gravity | 1.04 - 1.09 at 25 Degree C |
Ph Value | 11.0 - 14.0 |
Brand | Dr Fixit |
Appearance | Free Flowing Liquid |
Non Volatile Content | 13.5 - 14.5 % |
Chloride Content | Max. 2.00 % |
Model Number/Name | 101 LW+ |
Dr. Fixit Waterproofing Chemical is specially formulated integral liquid waterproofing compound composed of surface active plasticising agents, polymers & additives. It is used as an additive for cement concrete, mortar & plasters. It makes concrete cohesive and prevents segregation.
Areas of Application
Waterproofing of concrete and sand-cement mortars used in
- Basements,
- Roof slabs and screeds,
- Water tanks & water retaining structures,
- External plastering,
- Bathrooms and balconies,
- Sumps and drains
Features-
- Corrosion resistant - Makes concrete more cohesive, hence protects steel better against corrosion
- Compatibility – Being a liquid, easily dispersible & compatible with concrete/mortar mixes.
- Permeability – It reduces the permeability of water into concrete.
- Strength – The setting time and compressive strength of the concrete remains within the specification limits.
- Shrinkage – Reduces shrinkage crack development in plaster & concrete.
- Workability – Improves workability of freshly mixed cement concrete.
- Durability – Increases durability by improving waterproofing of concrete.
Method of Application -
- Charge cement & aggregates to concrete mixer as per the mix design, mix in dry state for 1–2 minutes.
- Start addition of 75–80% mixing water & mix for 2-3 minutes.
- Dr. Fixit Pidiproof LW+ is added as per the recommended dosage into the remaining mixing / gauging water, then add to concrete mixer & mix for another 2 minutes.
- Place the concrete or apply plaster, as needed.
- Cure the applied mortar or concrete as per good construction practices
Precautions & Limitations -
- Do not add Dr. Fixit Pidiproof LW+ directly to dry cement & aggregate mix.
- Maintain water-cement ratio as low as possible.
- Do not increase the dosage of Dr. Fixit Pidiproof LW+ than the recommendation
Packaging Available - 200 ml, 1, 10, 20 & 100 litre.
Dosage
- 200 ml per 50 kg bag of cement
Shelf Life -
- Best before 2 years from the date manufacture when in sealed pack and stored under proper condition.
- Store in a cool & dry place.
Health & Safety -
- Use rubber hand gloves & safety goggles, while using Dr. Fixit Pidiproof LW+.
- In case of contact with skin, wash with plenty of water.
- Keep out of reach of children
Note -
- Product prices will depend entirely on the market price.
View Complete Details
Coverage | 3.0 to 3.5 m2 Per Litre For 2 Coats* |
Types | Waterproofing Coating |
Form of Chemicals | Liquid |
Application | Construction |
Brand | Dr Fixit |
Packaging Size | 20 Litre |
Tensile Strength | 1.1 N/mm2 |
Solid Content | 56 % |
Elongation | 150 % |
Dry Film Thickness | 160 Micron |
Crack Bridging Index | 0.5 mm Passes |
Model Number/Name | 625 |
Dr. Fixit Raincoat Cool is a heat reducing & ‘Energy Saving’ acrylic waterproofing coating. It is composed of specially selected reflective additives, light fast & weather durable pigments & graded inert fillers. It is a solar reflective coating on exterior walls which helps in reduction of enery usages by less heat transfer into buildings & keeps the interiors cool . The coating serve the dual purpose of thermal reduction & with additional waterproofing protection.
Areas of Application -
- All types of exterior masonry surfaces, concrete, cement sand renderings, etc.
Features & Benefits -
- Solar Reflective - Re-radiates most of solar heat back into atmosphere, thus lowers the surface
- temperature.
- Durability - Provides long time protection to building that are endangered due to thermal degradation
- Waterproofing - Excellent waterproofing increases the durability of structure
- Shades – Available in wide range of pastel & selective dark shades
- Elastomeric - High elasticity withstand stress caused by thermal expansion & contraction.
- Microbial resistance - Resistance to fungus and algae growth, hence maintains the aesthetic of buildings.
- Eco friendly -Non Toxic water based system
- Energy Saving – Low heat transfer into building hence reduction in electrical consumption
- Ready to use – No dilution is required.
- Substrate temperature reduction up to 8ºC.
Method of Application -
- Surface Preparation: on Cementitious Surfaces
- All new cement-sand renderings /concrete surfaces should be allowed to age 6 to 8 weeks before surface coating.
- Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease, etc. by
- mechanical means such as wire brushing & shot blasting. Finally vacuum cleaning of all loose solids and
- liquids can be done, if required.
- All surface cracks up to 5 mm width should be filled up with Dr. Fixit Crack-X.
- Cracks more than 5 mm and all separation gaps should be filled up with Dr. Fixit Pidicrete URP modified mortar or as specified.
Priming -
- Attain SSD condition before priming, Prime with Dr. Fixit Primeseal (2 part primer : 1 part water)
- Apply with brush or roller.
Application -
- Use Dr. Fixit Raincoat Coool directly from the container. Stir contents well before use.
- Apply 2 coats of Dr. Fixit Raincoat Coool without any dilution by brush or roller at an interval of 5-6 hours.
- For enhanced protection, apply additional coat of Dr. Fixit Raincoat Coool on rain lashing walls, chajjas and parapet walls.
- Allow the coated surface to air cure fully for 7 days
Precautions & Limitations -
- Do not dilute.
- Always to be kept as final coat. i.e. No overcoating on Dr. Fixit Raincoat Coool.
- Do not apply when ambient temperature is below 10°C or above 45°C.
- Do not apply in direct sunlight or during rains.
- Adhesion property may get affected over putty and very smooth surfaces.
Shelf Life & Storage -
- Shelf life is 24 months from the date of manufacturing in unopened conditions.
- Store in a cool and dry place.
- Keep away from direct sunlight and heat.
Health & Safety Precautions -
- Skin Contact: Wash skin with soap & water. Remove contaminated clothes.
- On eye contact: Immediately splash eyes with plenty of water. Consult Physician if irritation persists.
View Complete Details
need
details