R.R. Chemtech Corporation

RX40NC6H PLC iQ-R Series; DC high-speed input, Negative, 16 point

RX40NC6B PLC iQ-R Series; Input Module with Diagnostic function

RX41C6HS PLC iQ-R Series; DC input module Eingangsmodul, highspeed, 32 DC24V6mA

RX61C6HS PLC iQ-R Series; DC input module, high speed

RX70C4 Input module, 16 inputs, 5-12 V DC input (1,7/4,8mA), positive/negative common

RX71C4  Input module, 32 inputs, 5-12 V DC input (1,7/4,8mA), positive/negative common

RX72C4 Input module, 64 inputs, 5-12 V DC input (1,7/4,8mA), positive/negative common

RX40C7 PLC iQ-R Series; DC input module, 16 point

RX41C4 PLC iQ-R Series; DC input module, 32 point

RX42C4 PLC iQ-R Series; digital input module, 24 VDC, 64 points, 2x 40-pin sockets

RX41C4-TS PLC iQ-R Series; DC input module, 32 point, Spring clamp terminal

RX10 PLC iQ-R Series; AC input module, 16 point

RX40C7-TS PLC iQ-R Series; DC input module, 16 point, Spring clamp terminal

RX40NC6S-TS PLC iQ-R Series; DC ; Single 16 point; Double 8 point input; Safety

RX28 PLC iQ-R Series; AC input module, 8 point

RX40PC6H PLC iQ-R Series; DC high-speed input, Positive, 16 point

RX10-TS PLC iQ-R Series; 100-120V AC input module, 16 point, Spring clamp terminal

Brand

Accessory Type

PLC I/O Module

Series

MELSEC FX

Input Type

Analogue

Number of Inputs

4 (PT100)

Output Type

Relay, Transistor

For Use With

MELSEC FX Series

Maximum Operating Temperature

+55°C

Dimensions

90 x 17.6 x 89.5 mm

Country of Origin

Japan

The Allen-Bradley 1768-L45S is a CompactGuardLogix controller. This controller is a 1oo2 safety architecture, rated up to and including Safety Integrity Level 3 (SIL 3), Performance Level e (PL e) functionality. It has 3 MB standard memory and 1MB Safety memory. This controller supports up to Thirty (30) modules in Three (3) banks and supports Two (2) 1768 communication modules. It has an embedded One (1) RS232 communication port.

Additional Information:

• Item Code: 1768-L45s
• Delivery Time: 5-6 days

• Product Type               LOGIC CONTROL
• Application                  Logic,Process,Machine & Sequence Control Application use.
• Function                     LOGIC CONTROLLER
• Color                          STANDARD

The SIMATIC ET 200S is a modular, distributed I/O system used in industrial automation for connecting sensors and actuators to a central PLC (Programmable Logic Controller). It's designed for both standard and fail-safe applications and can be used for various tasks such as counting, measurement, and position detection. 

Allen Bradley Micro800 PLCs

Micro830 PLCs (10-88 Points)

Micro850 PLCs (24-192 Points)

Micro870 PLCs (24-304 Points)

• Nominal current IN: 1A/5A
• Nominal frequency: 50/60 Hz
• Power consumption: <1 VA/atlN = 1A

• Static protective device
• Earth fault detection with core balance C.T. or in Holmgreen circuit
• Low pass filter for suppression of harmonics
• Wide range of operation of the supply voltage (AC/DC)

Alongside the proven technology of the first generation I/O systems PSSuniversal with head modules and corresponding I/O modules, the remote I/O system PSSuniversal 2 is continuing the success story. Improvements to mechanics, handling and diagnostics show the way to the new universal generation.

The communication modules PSSuniversal and PSSuniversal 2 are used for decentralised networking and for transferring safety-related and non-safety-related signals at field level. Using PSSuniversal, a wide range of applications can be implemented by connecting up to 64 I/O modules. You can connect the communication modules to the PLC controllers PSSuniversal or other higher-level controllers.

• Standards EN IEC 62061 EN ISO 13849-1 EN IEC 60947-5-1 EN IEC 60947-5-3 EN IEC 60947-5-5 EN IEC 61508
• Climatic stress EN 60068-2-78
• Housing material Glass-fibre reinforced thermoplastic, ventilated
• Stop-Category 0 Electronic Fuse Yes Wire breakage detection Yes
• Number of LEDs 7 Number of normally closed (NC) 8