S.K.Associiates

Adhesive for fixing vitrified tiles on the floor as well as for tile-on-tile application

• Ready to mix
 
• Self curing
 
• Easy to use
 
• High compressive strength
 
• Good coverage
 
• Tile on tile application
 
• High bond strength
 
• Single component product
 
• Low prorosity tiles
 
• High durability

Floor, Wall

weberset classic is a high polymer modified thin-set tile adhesive, specially formulated for fixing low porosity vitrified tiles on the floor in internal areas. The adhesive can be used for fixing ceramic tiles on wall and floor and is suitable for dry as well as wet areas for internal application. This is also suitable for tile-on-tile application for fixing vitrified tiles on pre-existing ceramic tile floors.

• High Bond strength.
• The free-flowing product makes it easier to mix and apply, easy-to-use.
• Useful for bed thickness of 3-15* mm. May go up to 15 mm in a limited extent for wall & floor application.
• Thixotropic formula - no sag, for the easy application on the wall.
• Low VOC – For a healthy living.
• For installation of vitrified tiles on the floor.
• Suitable for internal use only.
• Suitable for Tile-on-tile application of vitrified tiles on pre-existing ceramic tile floors.
• Self-curing properties, which allows for no-hassle application, with minimum labour.
• No hacking of the substrate required to achieve the required bonding.
• Do not use for large format tiles.
• Do not use in external areas, or areas exposed to direct sunlight.
• Do not use for fixing vitrified tiles on walls.
• Do not use for fixing stones.
• Do not use on the wet screed. The surface must be fully cured.
• Do not use for installing glass mosaic, glass tiles, or metal tiles. Use only weberset glass mosaic for fixing glass mosaics, and only weber epoxy adhesive for fixing glass and metal tiles.
• Do not use for wooden flooring, for insulating and soundproofing panels.
• Do not use on waterproofing coat – If waterproofing is required, use webertec SBR and
• webertec crete for the same. Refer to the respective datasheets for details.

Adhesive for fixing vitrified tiles on the floor as well as for tile-on-tile application

• Ready to mix
 
• Self curing
 
• Easy to use
 
• High compressive strength
 
• Good coverage
 
• Tile on tile application
 
• High bond strength
 
• Single component product
 
• Low prorosity tiles
 
• High durability

Floor, Wall

weberset classic is a high polymer modified thin-set tile adhesive, specially formulated for fixing low porosity vitrified tiles on the floor in internal areas. The adhesive can be used for fixing ceramic tiles on wall and floor and is suitable for dry as well as wet areas for internal application. This is also suitable for tile-on-tile application for fixing vitrified tiles on pre-existing ceramic tile floors.

• High Bond strength.
• The free-flowing product makes it easier to mix and apply, easy-to-use.
• Useful for bed thickness of 3-15* mm. May go up to 15 mm in a limited extent for wall & floor application.
• Thixotropic formula - no sag, for the easy application on the wall.
• Low VOC – For a healthy living.
• For installation of vitrified tiles on the floor.
• Suitable for internal use only.
• Suitable for Tile-on-tile application of vitrified tiles on pre-existing ceramic tile floors.
• Self-curing properties, which allows for no-hassle application, with minimum labour.
• No hacking of the substrate required to achieve the required bonding.
• Do not use for large format tiles.
• Do not use in external areas, or areas exposed to direct sunlight.
• Do not use for fixing vitrified tiles on walls.
• Do not use for fixing stones.
• Do not use on the wet screed. The surface must be fully cured.
• Do not use for installing glass mosaic, glass tiles, or metal tiles. Use only weberset glass mosaic for fixing glass mosaics, and only weber epoxy adhesive for fixing glass and metal tiles.
• Do not use for wooden flooring, for insulating and soundproofing panels.
• Do not use on waterproofing coat – If waterproofing is required, use webertec SBR and
• webertec crete for the same. Refer to the respective datasheets for details.

Adhesive for fixing vitrified tiles on the floor as well as for tile-on-tile application

• Ready to mix
 
• Self curing
 
• Easy to use
 
• High compressive strength
 
• Good coverage
 
• Tile on tile application
 
• High bond strength
 
• Single component product
 
• Low prorosity tiles
 
• High durability

Floor, Wall

weberset classic is a high polymer modified thin-set tile adhesive, specially formulated for fixing low porosity vitrified tiles on the floor in internal areas. The adhesive can be used for fixing ceramic tiles on wall and floor and is suitable for dry as well as wet areas for internal application. This is also suitable for tile-on-tile application for fixing vitrified tiles on pre-existing ceramic tile floors.

• High Bond strength.
• The free-flowing product makes it easier to mix and apply, easy-to-use.
• Useful for bed thickness of 3-15* mm. May go up to 15 mm in a limited extent for wall & floor application.
• Thixotropic formula - no sag, for the easy application on the wall.
• Low VOC – For a healthy living.
• For installation of vitrified tiles on the floor.
• Suitable for internal use only.
• Suitable for Tile-on-tile application of vitrified tiles on pre-existing ceramic tile floors.
• Self-curing properties, which allows for no-hassle application, with minimum labour.
• No hacking of the substrate required to achieve the required bonding.
• Do not use for large format tiles.
• Do not use in external areas, or areas exposed to direct sunlight.
• Do not use for fixing vitrified tiles on walls.
• Do not use for fixing stones.
• Do not use on the wet screed. The surface must be fully cured.
• Do not use for installing glass mosaic, glass tiles, or metal tiles. Use only weberset glass mosaic for fixing glass mosaics, and only weber epoxy adhesive for fixing glass and metal tiles.
• Do not use for wooden flooring, for insulating and soundproofing panels.
• Do not use on waterproofing coat – If waterproofing is required, use webertec SBR and
• webertec crete for the same. Refer to the respective datasheets for details.

weberfix PU is a two-component, ready to mix, polyurethane-based thin-set adhesive for fixing all types of tiles and stones on a variety of substrates including metal surfaces and drywall boards. weberfix PU is suitable for application on the interior as well as exterior wall and floor.

• Easy to apply

• weberfix PU is a two component, ready to mix, polyurethane based thinset adhesive for fixing all types of tiles and stones on a variety of substrates including metal surfaces and drywall boards. weberfix PU is suitable for application on the interior as well as exterior wall and floor.

  weberfix PU's polyurethane formulation provides high flexibility which makes it the best choice for:

  • Tiles and stones prone to water absorption and thermal expansion
  • Absorbent and nonabsorbent deformable substrates like wood, metals, rubber, PVC, linoleum, asphalt etc.
  • Heated subfloors and in areas subject to thermal shock and freezing
  • No spacer required *

  weberfix PU provides much-needed flexibility for building world-class architectural designs by removing constraints in terms of substrate and tile types. From any tile to any substrate, weberfix PU can handle it all.

• • Suitable for tile and stone cladding on high rise buildings.
  • No Spacer required if adequate constructions joints are provided in tile and stone cladding.
  • For internal as well as external wall and floor.
  • Very High Bond strength and chemical resistance.
  • Apply on substrates including wood, metals, rubber, PVC, linoleum.
  • Suitable for heated subfloors and areas subjected to thermal shock and freezing.
  • Ideal for tiles and stones prone to deformation due to water absorption and thermal expansion.
  • Suitable to install all tiles and stones including glass** and metal tiles.
  • Weberfix PU can be used for new construction as well as for renovation over existing floors and walls.
  • No hacking of substrate is required to achieve the bonding.
  • No shrinkage, prevents debonding and gives longer life to tiles and stones.
  • No sag formula: allows for hassle free application on vertical walls, without any slippage.
  • Moisture free system : Does not damage wooden substrates or tiles, and water sensitive stone like green marble.
  • Reaction based system, and thus not harshly affected by temperature & humidity.
  • Useful for bed thickness of 3-6mm. May go upto 10 mm in limited extent.
  • Two Component adhesive : prevents wastage, as only quantity which is required has to be mixed.
  • Weberfix PU can be used on touch dry surface of concrete. Do not need to wait for substrate to get completely dry.
  • Easy workability.
  • The user should determine the usability of the product for its intended use. Our products are manufactured under the Saint-Gobain quality standards, and subjected to strict quality control procedures. Since the company has no control over site conditions and installation procedures, the company will not be responsible under any
    circumstances for any loss, damage or liability from incorrect usage.